Hello,
I recently started using Home Assistant, and I purchased a Sonoff -P adapter because I was having issues with my outdated husbzb-1 that I had sitting around the house for years. I was able to configure 7 or 8 devices with z2m and all were working perfectly. I updated the HA OS to 14.2 and a few hours later I noticed that I was unable to pair two new Sonoff temp/hum sensors and then noticed that I was not getting updated information from any of my existing devices. When I start the Zigbee2MQTT and check the logs it pauses at “Starting Zigbee2MQTT without watchdog.” and just hangs and throws no errors. I tried rolling back to 14.1, but that didn’t seem to resolve, so I updated to 14.2 again. I’ve tried to uninstall MQTT, Mosquito Broker and Zigbee2MQTT and reinstall using https://www.youtube.com/watch?v=sfsZF0R0HtE&t=510s instructions, but substituting adapter: zstack. From what I remember the herdsman would start after the point where it hangs, but does not appear to be doing so. I’ve been trying to search the forums, but am not able to piece this back together. Any insight would be appreciated. I tried to provide pertinent information below, but please let me know what other logs, or other information would be helpful. Thank you.
Raspberry Pi 5
- Core2025.1.4
- Supervisor2024.12.3
- Operating System14.2
- Frontend20250109.2
Zigbee2MQTT: Current version: 2.0.0-2
[20:22:52] INFO: Preparing to start…
[20:22:52] INFO: Socat not enabled
[20:22:52] INFO: Starting Zigbee2MQTT…
Starting Zigbee2MQTT without watchdog.