ZG-205Z missing presence in ZHA

[Shadoxity (Leon Black)]

Hey all,

Struggling to work out what is wrong and why I am not getting all the sensors or the settings I see in other posts.

I have a ZG-205Z and looking to use the presence, but it only shows motion and illuminance in HA (using ZHA).

I have seen other posts that seem to be related to this and screenshots of all settings available but I have none of that.
i.e.

Tuya ZG-205ZL Human Presence Sensor configuration woes

I’ve been having a very similar issue, same device except 24GHz model. This conversation made me try something different and “so far” it has been working. I’ve set the “Static detection distance” and “Static detection sensitivity” all the way down - 0 for both. I think it kept detecting micromovements from something - in your case probably the fridge compressor. I’ve also noticed that if I walk through the hallway on the other side of the wall, it will sometimes detect and activate as “Home”. …

This is all it shows up with

any assistance appreciated

[Shadoxity (Leon Black)]

I ended up moving to Z2M and everything is available and working

[y7483745]

I have the same issue with the ZG-204ZM (Hobeian) and ZHA.
They show only illuminance and motion.
Bought 5 of them.

On the other hand I have a TS0601 (_TZE200_kb5noeto). This was the first presence sennsor I’ve added and it worked out-of-the-box.

Is there a way to get the rest (radar, etc.) via ZHA for the ZG-204ZM?
I don’t need yet Z2M, ZHA is enough for me.

Thanks!

[SpaceGlider]

@y7483745

ZG-204ZM

There is a PR that is merged since July 30th. I guess it will then be incorporated in the next HA release?

See here:

Add Tuya HOBEIAN ZG-204ZM presence sensor variant