Some info for the devs if anyone interested.
this is for Smartthings water leak sensor:
Device:
NWK: 0xbeef
IEEE: 28:6d:97:00:xx:xx:xx:xx
Endpoints:
1: profile=0x104, device_type=DeviceType.IAS_ZONE
Input Clusters:
Basic (0)
Power Configuration (1)
Identify (3)
Poll Control (32)
Temperature Measurement (1026)
IAS Zone (1280)
Output Clusters:
Identify (3)
Ota (25)
I was able to pull the following attributes from it:
===============================
endpoint #1
===============================
basic cluster
All supported attributes
'0x0000-zcl_version' = 2
'0x0001-app_version' = 9
'0x0003-hw_version' = 0
'0x0004-manufacturer' = b'Samjin'
'0x0005-model' = b'water'
'0x0007-power_source' = 0
'0x4000-sw_build_id' = b''
===============================
power cluster
All supported attributes
'0x0020-battery_voltage' = 30
'0x0021-battery_percentage_remaining' = 200
'0x0041-battery_2_percentage_remaining' = 200
===============================
temperature cluster
All supported attributes
'0x0000-measured_value' = 2425
'0x0001-min_measured_value' = 0
'0x0002-max_measured_value' = 0
===============================
identify cluster
All supported attributes
'0x0000-identify_time' = 0
===============================
poll_control cluster
All supported attributes
'0x0000-checkin_interval' = 0
'0x0001-long_poll_interval' = 28
'0x0002-short_poll_interval' = 1
'0x0003-fast_poll_timeout' = 40
===============================
ias_zone cluster:
All supported attributes
'0x0000-zone_state' = 1
'0x0001-zone_type' = 42
'0x0002-zone_status' = 32
'0x0010-cie_addr' = xx:xx:xx:xx:xx:xx:xx:xx
'0x0011-zone_id' = 0