Hi Folks,
I’ve got some weird issue going on with my roller shutters (zigbee). The work well, but after some time it looks like they lost calibration.
I have an automation that closes them for 70% at 19.15. After a few weeks the same 70% closes them almost completly and when opening them 70% they (logic) don’t open fully.
The Zigbee switch i use is from the brand “BSEED” and looks like this:
The automation is based on the entity, not the device. (i tried both)
service: cover.set_cover_position
data:
position: 30
target:
entity_id: cover.blind_slaapkamer_l
Before this i had some Shelly 2.5’s and they were working rock solid, but to much hassle to get that behind a manual override switch, so for that reason the zigbee one.