Zigbee2MQTT configuration for TS0210 vibration sensor that is from 'Moes'

Configuration
1

Hi there,

I have a TS0210 vibration sensor that Zigbee2MQTT says is supported however mine comes up unsupported.

https://www.zigbee2mqtt.io/devices/TS0210.html#tuya-ts0210

My guess is Moes does something to the ID that makes Zigbee2MQTT not identify as a supported item.

Logs below after device connected (I’m a beginner)

Received message from unsupported device with Zigbee model 'TS0210' and manufacturer name '_TZ3000_bmfw9ykl'

Warning 2022-10-09 14:17:26Please see: https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html

Warning 2022-10-09 14:17:38Received message from unsupported device with Zigbee model 'TS0210' and manufacturer name '_TZ3000_bmfw9ykl'

Warning 2022-10-09 14:17:38Please see: https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html

Warning 2022-10-09 14:19:29Received message from unsupported device with Zigbee model 'TS0210' and manufacturer name '_TZ3000_bmfw9ykl'

Warning 2022-10-09 14:19:29Please see: https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html

Warning 2022-10-09 14:19:34Received message from unsupported device with Zigbee model 'TS0210' and manufacturer name '_TZ3000_bmfw9ykl'

Warning 2022-10-09 14:19:34Please see: https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html

Warning 2022-10-09 14:19:36Received message from unsupported device with Zigbee model 'TS0210' and manufacturer name '_TZ3000_bmfw9ykl'

Warning 2022-10-09 14:19:36Please see: https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html

2

bump anyone?

3

I just ordered one of these sensors and i have some issues. My sensor gets paired and shows up OK in zigbee2mqtt but the vibration detection just stay on. It should be cleared after 30 sec but as far does not.

EDIT: After repairing for the 6 th time it now looks like it finally cleared.

4

How did you make it work?

I paired it 2 times already. Seems to work with the pairing (I am using skyconnect on my HA).

I just try over and over again? Remove device from HA, reset button and add again?