zigbee2MQTT Instability

Busta999x · June 23, 2024, 8:48am

zigbee2MQTT was rock solid and stable.

Anyone any insight into the issue and any suggestions on how to resolve them?

I have zigbee devices that are updating Last seen when you send a command to them but totally ignore the command until the device is re-paired. Meaning you only know a device needs to repaired when it if you notice it has stopped working. I suppose I could update all automations to check if the action has been performed but I would be surprised if that should be necessary.

Anyone any insight into the issue and any suggestions on how to resolve them?

I wiped and rebuilt zigbee2MQTT with a new smlight coordinator a month ago and it has been absolutely solid.

Following the latest round of Home Assistant updates including the Node Red 14 update that kept crashing NR 13 once the update 14 came out I am now getting zigbee2MQTT vomiting errors constantly.

Also the Home Assistant iOS app on iPhone/iPad/macOS is largely useless as it now takes 20-30 seconds to respond to anything.

Busta999x · June 23, 2024, 9:04am

Having looked at one of the zigbee2MQTT errors ‘0xc7: NWK_TABLE_FULL’ I did update the zigged fw on the coordinator see if that helps.

nickrout · June 23, 2024, 9:06am

If you want to show your logs, don’t post a photo or screen image.

Busta999x · June 23, 2024, 9:21am

Not a photo - not sure if this is what is required.

[2024-06-23 10:11:10] error: 	z2m: Publish 'get' 'led_indication' to 'Motion/Freezer' failed: 'Error: ZCL command 0x0017880106487dcd/2 genBasic.read([51], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4107,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 10536 - 2 - 185 - 0 - 1 after 10000ms)'
[2024-06-23 10:11:17] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 190 - 8 - 1 after 10000ms)'
[2024-06-23 10:11:26] error: 	z2m: Publish 'get' 'indicator_mode' to 'Power/Lounge/Blind Charger' failed: 'Error: ZCL command 0xcc86ecfffe1aed26/1 genOnOff.read(["tuyaBacklightMode"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (SRSP - AF - dataRequest after 6000ms)'
[2024-06-23 10:11:36] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:11:36] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:11:46] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:11:46] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:11:46] error: 	z2m: Publish 'get' 'illuminance_lux' to 'Motion/WC/r' failed: 'Error: ZCL command 0xd87a3bfffe013f07/1 msIlluminanceMeasurement.read(["measuredValue"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Status 'UNSUPPORTED_ATTRIBUTE')'
[2024-06-23 10:12:05] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 222 - 8 - 1 after 10000ms)'
[2024-06-23 10:12:08] error: 	z2m: Publish 'get' 'motor_speed' to 'Blind/Kitchen' failed: 'Error: ZCL command 0x54ef4410003e4ae4/1 manuSpecificLumi.read([1032], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Data request failed with error: 'MAC channel access failure' (225))'
[2024-06-23 10:12:09] error: 	z2m: Publish 'get' 'motor_speed' to 'Blind/Stairs' failed: 'Error: ZCL command 0x54ef4410003e4cbe/1 manuSpecificLumi.read([1032], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 34322 - 1 - 234 - 64704 - 1 after 10000ms)'
[2024-06-23 10:12:11] error: 	z2m: Publish 'get' 'motor_speed' to 'Blind/Craftroom' failed: 'Error: ZCL command 0x54ef4410003e4b0e/1 manuSpecificLumi.read([1032], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 47853 - 1 - 235 - 64704 - 1 after 10000ms)'
[2024-06-23 10:12:41] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 238 - 8 - 1 after 10000ms)'
[2024-06-23 10:12:57] error: 	z2m: Publish 'get' 'power_on_behavior' to 'Power/Utility/Blind Charger' failed: 'Error: ZCL command 0x000d6ffffe6247bf/1 genOnOff.read(["startUpOnOff"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 64794 - 1 - 50 - 6 - 1 after 10000ms)'
[2024-06-23 10:13:04] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Door' failed: 'Error: ZCL command 0x00158d000256f8ab/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 18475 - 1 - 64 - 8 - 1 after 10000ms)'
[2024-06-23 10:13:08] error: 	z2m: Publish 'get' 'power_outage_memory' to 'Power/Kitchen/Dishwasher' failed: 'Error: ZCL command 0xcc86ecfffe134928/1 genOnOff.read(["moesStartUpOnOff"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 37581 - 1 - 61 - 6 - 1 after 10000ms)'
[2024-06-23 10:13:09] error: 	z2m: Publish 'get' 'battery' to 'Blind/Craftroom' failed: 'Error: ZCL command 0x54ef4410003e4b0e/1 manuSpecificLumi.read([1034], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Data request failed with error: 'MAC channel access failure' (225))'
[2024-06-23 10:13:10] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 247 - 8 - 1 after 10000ms)'
[2024-06-23 10:13:13] error: 	z2m: Publish 'get' 'power_outage_memory' to 'Power/Lounge/Media Socket' failed: 'Error: ZCL command 0x84fd27fffece6e99/1 genOnOff.read(["moesStartUpOnOff"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 37507 - 1 - 74 - 6 - 1 after 10000ms)'
[2024-06-23 10:13:14] error: 	z2m: Publish 'get' 'power_on_behavior' to 'Power/Craftroom/Desk Light' failed: 'Error: ZCL command 0x14b457fffe4b7162/1 genOnOff.read(["startUpOnOff"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 48335 - 1 - 73 - 6 - 1 after 10000ms)'
[2024-06-23 10:13:23] error: 	z2m: Publish 'get' 'battery' to 'Blind/WC' failed: 'Error: ZCL command 0x54ef4410003e449e/1 manuSpecificLumi.read([1034], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 29011 - 1 - 78 - 64704 - 1 after 10000ms)'
[2024-06-23 10:13:27] error: 	z2m: Publish 'get' 'battery' to 'Blind/Kitchen' failed: 'Error: ZCL command 0x54ef4410003e4ae4/1 manuSpecificLumi.read([1034], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 56670 - 1 - 79 - 64704 - 1 after 10000ms)'
[2024-06-23 10:13:29] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:13:29] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:13:46] error: 	z2m: Publish 'get' 'battery' to 'Blind/Stairs' failed: 'Error: ZCL command 0x54ef4410003e4cbe/1 manuSpecificLumi.read([1034], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 34322 - 1 - 81 - 64704 - 1 after 10000ms)'
[2024-06-23 10:13:46] error: 	z2m: Publish 'get' 'motion_sensitivity' to 'Motion/Backdoor' failed: 'Error: ZCL command 0x0017880106488793/2 msOccupancySensing.read([48], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4107,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 40462 - 2 - 86 - 1030 - 1 after 10000ms)'
[2024-06-23 10:13:46] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 1 - 8 - 1 after 10000ms)'
[2024-06-23 10:13:48] error: 	z2m: Publish 'get' 'power_on_behavior' to 'Sheds/Middle Light' failed: 'Error: ZCL command 0x00178801061f44af/11 genOnOff.read(["startUpOnOff"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 9652 - 11 - 88 - 6 - 1 after 10000ms)'
[2024-06-23 10:13:48] error: 	z2m: Publish 'get' 'power_on_behavior' to 'Sheds/Right Light' failed: 'Error: ZCL command 0x0017880103b1e435/11 genOnOff.read(["startUpOnOff"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 64103 - 11 - 90 - 6 - 1 after 10000ms)'
[2024-06-23 10:13:48] error: 	z2m: Publish 'get' 'motion_sensitivity' to 'Motion/Shed Middle' failed: 'Error: ZCL command 0x00178801064800ba/2 msOccupancySensing.read([48], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4107,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 12632 - 2 - 89 - 1030 - 1 after 10000ms)'
[2024-06-23 10:13:57] error: 	z2m: Publish 'get' 'motion_sensitivity' to 'Motion/Fridge' failed: 'Error: ZCL command 0x00178801064894f1/2 msOccupancySensing.read([48], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4107,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Data request failed with error: 'MAC channel access failure' (225))'
[2024-06-23 10:13:59] error: 	z2m: Publish 'get' 'power_on_behavior' to 'Sheds/Left Light' failed: 'Error: ZCL command 0x0017880103d19b8b/11 genOnOff.read(["startUpOnOff"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 25723 - 11 - 91 - 6 - 1 after 10000ms)'
[2024-06-23 10:14:11] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 21 - 8 - 1 after 10000ms)'
[2024-06-23 10:14:36] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Door' failed: 'Error: ZCL command 0x00158d000256f8ab/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (SRSP - AF - dataRequest after 6000ms)'
[2024-06-23 10:14:36] error: 	z2m: Publish 'get' 'power_on_behavior' to 'Power/Utility/Batteries Fan' failed: 'Error: ZCL command 0x14b457fffe4c4102/1 genOnOff.read(["startUpOnOff"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Data request failed with error: 'Timeout' (9999))'
[2024-06-23 10:14:36] error: 	z2m: Publish 'get' 'brightness' to 'Power/Guest' failed: 'Error: ZCL command 0x00158d000256f8ef/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Data request failed with error: 'Timeout' (9999))'
[2024-06-23 10:14:52] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 29 - 8 - 1 after 10000ms)'
[2024-06-23 10:15:16] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 67 - 8 - 1 after 10000ms)'
[2024-06-23 10:15:19] error: 	z2m: Publish 'get' 'occupancy' to 'Motion/WC/r' failed: 'Error: ZCL command 0xd87a3bfffe013f07/1 msOccupancySensing.read(["occupancy"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Status 'UNSUPPORTED_ATTRIBUTE')'
[2024-06-23 10:15:34] error: 	z2m: Publish 'get' 'occupancy' to 'Motion/WC/r' failed: 'Error: ZCL command 0xd87a3bfffe013f07/1 msOccupancySensing.read(["occupancy"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Status 'UNSUPPORTED_ATTRIBUTE')'
[2024-06-23 10:15:42] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 128 - 8 - 1 after 10000ms)'
[2024-06-23 10:15:47] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Door' failed: 'Error: ZCL command 0x00158d000256f8ab/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 18475 - 1 - 198 - 8 - 1 after 10000ms)'
[2024-06-23 10:15:53] error: 	z2m: Publish 'get' 'power_on_behavior' to 'Sheds/Left Light' failed: 'Error: ZCL command 0x0017880103d19b8b/11 genOnOff.read(["startUpOnOff"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 25723 - 11 - 225 - 6 - 1 after 10000ms)'
[2024-06-23 10:16:04] error: 	z2m: Publish 'get' 'indicator_mode' to 'Power/Kitchen/Dishwasher' failed: 'Error: ZCL command 0xcc86ecfffe134928/1 genOnOff.read(["tuyaBacklightMode"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 37581 - 1 - 243 - 6 - 1 after 10000ms)'
[2024-06-23 10:16:06] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 201 - 8 - 1 after 10000ms)'
[2024-06-23 10:16:17] error: 	z2m: Publish 'get' 'occupancy' to 'Motion/WC/r' failed: 'Error: ZCL command 0xd87a3bfffe013f07/1 msOccupancySensing.read(["occupancy"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Status 'UNSUPPORTED_ATTRIBUTE')'
[2024-06-23 10:16:26] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Door' failed: 'Error: ZCL command 0x00158d000256f8ab/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 18475 - 1 - 15 - 8 - 1 after 10000ms)'
[2024-06-23 10:16:27] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Hair' failed: 'Error: ZCL command 0x00158d000256f8f3/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 32277 - 1 - 16 - 8 - 1 after 10000ms)'
[2024-06-23 10:16:28] error: 	z2m: Publish 'get' 'battery' to 'Blind/Stairs' failed: 'Error: ZCL command 0x54ef4410003e4cbe/1 manuSpecificLumi.read([1034], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 34322 - 1 - 32 - 64704 - 1 after 10000ms)'
[2024-06-23 10:16:30] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 18 - 8 - 1 after 10000ms)'
[2024-06-23 10:16:58] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 76 - 8 - 1 after 10000ms)'
[2024-06-23 10:17:12] error: 	z2m: Publish 'get' 'indicator_mode' to 'Power/Kitchen/Fridge' failed: 'Error: ZCL command 0xcc86ecfffe1e7bd0/1 genOnOff.read(["tuyaBacklightMode"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 41293 - 1 - 112 - 6 - 1 after 10000ms)'
[2024-06-23 10:17:13] error: 	z2m: Publish 'get' 'indicator_mode' to 'Power/Lounge/Fire' failed: 'Error: ZCL command 0xcc86ecfffe134881/1 genOnOff.read(["tuyaBacklightMode"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 49296 - 1 - 116 - 6 - 1 after 10000ms)'
[2024-06-23 10:17:31] error: 	z2m: Publish 'get' 'charging_status' to 'Blind/Kitchen' failed: 'Error: ZCL command 0x54ef4410003e4ae4/1 manuSpecificLumi.read([1033], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 56670 - 1 - 117 - 64704 - 1 after 10000ms)'
[2024-06-23 10:17:31] error: 	z2m: Publish 'get' 'charging_status' to 'Blind/Stairs' failed: 'Error: ZCL command 0x54ef4410003e4cbe/1 manuSpecificLumi.read([1033], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 34322 - 1 - 119 - 64704 - 1 after 10000ms)'
[2024-06-23 10:18:01] error: 	z2m: Publish 'get' 'charging_status' to 'Blind/WC' failed: 'Error: ZCL command 0x54ef4410003e449e/1 manuSpecificLumi.read([1033], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 29011 - 1 - 157 - 64704 - 1 after 10000ms)'
[2024-06-23 10:18:17] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 174 - 8 - 1 after 10000ms)'
[2024-06-23 10:18:18] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:18:18] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:18:20] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:18:20] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:18:20] error: 	z2m: Publish 'get' 'illuminance_lux' to 'Motion/WC/r' failed: 'Error: ZCL command 0xd87a3bfffe013f07/1 msIlluminanceMeasurement.read(["measuredValue"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Status 'UNSUPPORTED_ATTRIBUTE')'
[2024-06-23 10:18:48] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 182 - 8 - 1 after 10000ms)'
[2024-06-23 10:18:49] error: 	z2m: Publish 'get' 'motor_speed' to 'Blind/WC' failed: 'Error: ZCL command 0x54ef4410003e449e/1 manuSpecificLumi.read([1032], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 29011 - 1 - 202 - 64704 - 1 after 10000ms)'
[2024-06-23 10:18:53] error: 	z2m: Publish 'get' 'led_indication' to 'Motion/Back of Sheds' failed: 'Error: ZCL command 0x001788010648890c/2 genBasic.read([51], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4107,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 5726 - 2 - 225 - 0 - 1 after 10000ms)'
[2024-06-23 10:19:00] error: 	z2m: Publish 'get' 'indicator_mode' to 'Power/Lounge/Blind Charger' failed: 'Error: ZCL command 0xcc86ecfffe1aed26/1 genOnOff.read(["tuyaBacklightMode"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 10617 - 1 - 249 - 6 - 1 after 10000ms)'
[2024-06-23 10:19:09] error: 	z2m: Publish 'get' 'charging_status' to 'Blind/WC' failed: 'Error: ZCL command 0x54ef4410003e449e/1 manuSpecificLumi.read([1033], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Data request failed with error: 'MAC channel access failure' (225))'
[2024-06-23 10:19:16] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:19:16] error: 	z2m: Exception while calling fromZigbee converter: Value is not a number, got undefined (undefined)}
[2024-06-23 10:19:18] error: 	z2m: Publish 'get' 'brightness' to 'Power/Master/Mike Closet Sockets' failed: 'Error: ZCL command 0x00158d000256f93b/1 genLevelCtrl.read(["currentLevel"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 727 - 1 - 228 - 8 - 1 after 10000ms)'

nickrout · June 23, 2024, 8:57pm

Clarified my post, you have got it now .

nickrout · June 23, 2024, 9:07pm

Maybe Error: ZCL command genOnOff.on · Issue #22189 · Koenkk/zigbee2mqtt · GitHub

Busta999x · June 23, 2024, 10:26pm

Unfortunately no solution.

Just 100 failing zigbee devices. I have moved the 30 Aqara devices off to an Aqara hub to restore some stability.

Thank goodness I moved most of the 90 lightbulbs off onto hue hubs so at least we have most lighting working, just the Kitchen and WC are having to use light switches to get some lighting working.

I do need to find a way to restore some stability to the home automation.

I have disabled 50+ addons and integrations, that appears to have returned Home Assistant to basic functionality.

It does appear it would be more reliable if I restore Home Assistant or possibly Node Red as the hub of hubs, that way if something falls over the rest remains functional.

nickrout · June 23, 2024, 11:10pm

What are your settings in z2m?

Perhaps (and clutching at straws here) the change in z2m to ember from ezpz. What firmware is in your co-ordinator? Find it here

In my case

Hardware: zStack3x0 20220219

Busta999x · June 24, 2024, 6:15am

Not sure what is needed here.

But for a month this has been solid, then three days ago it has descended into useless.

nickrout · June 24, 2024, 6:54am

I thought you said you had a smlight coordinator. My understanding is that it should have ember firmware, not zstack. So damned if I know what is wrong.

Busta999x · June 24, 2024, 7:34am

Yup it is the Smlight.

This latest version of zigbee2MQTT won’t allow any device settings to be made.

Any change like turn on Retain or QOS are automatically deselected before you can hit save.

I have reported on Home Assistant community.

This was installed a month ago from scratch virgin, default and I re added all the router devices then the end devices.

It was my third rebuild in six months in order to get some stability.

This was the best build to date for one month.

Then it collapsed into a bag of ……

I massively downsizing my expectations of Home Assistant, I had thrown half the resources of an M1 Mac mini at it, and it was using about a 1/3 of the resources available to it.

Given the collapse of zigbee2MQTT and Node Red at the same time I am going to remove node Red, Mqtt and zigbee2MQTT from Home Assistant to see if the will run stable as they did for the two years before I tried Home Assistant.

That way I can keep node Red at the top of the command and control and let Home Assistant provide the support it can and not over stressing it.

nickrout · June 24, 2024, 7:38am

Well it isn’t necessarily home assistant’s fault, or node red’s or mqtt or z2m.

The strange errors your keep having either point to very bad luck or operator error.

LiQuid_cOOled · June 24, 2024, 7:38am

zstack should work…

nickrout · June 24, 2024, 7:39am

On an smlight coordinator?

LiQuid_cOOled · June 24, 2024, 7:40am

yes sir, I have several.

nickrout · June 24, 2024, 7:40am

Ok, I must have read the docs wrong. What chip do they have?

LiQuid_cOOled · June 24, 2024, 7:42am

the chip is CC2652P for the two I have. Have the latest coming Tuesday.

Busta999x · June 24, 2024, 7:59am

Well given it is a vanilla install of Mqtt, zigbee2MQTT on a vanilla install of Home Assistant it must be bad luck.

I have a Home Assistant green I will wipe it update to latest and migrate to it.

If the problems continue I can only identify one culprit.

It will the 4th Home Assistant rebuild in 6 months.

LiQuid_cOOled · June 24, 2024, 7:59am

How much memory is allotted for HA?

nickrout · June 24, 2024, 8:00am

I did some research. The smlight web page says

User can flash Zigbee SoC (which is Texas Instruments CC2652P for SLZB-06 series and Silicon Labs EFR32 for SLZB-06M series)

So 2 products with slightly different names and vastly different chipsets.