ZWave smart plug is constantly changing Electric Consumption [W] entity

Hello, I picked up a couple zwave smart plugs so I could automate when my dishwasher has completed a cycle but I’m noticing that one of the sensors is constantly being updated. I’ve tried 2 different plugs and both do the same thing so I’m sure it’s my dishwasher that is changing the wattage, but it’s ridiculously fast:

2022-08-09 16:26:44.389 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.7 => 0
2022-08-09 16:26:44.601 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.8
2022-08-09 16:26:46.042 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.8 => 0
2022-08-09 16:26:46.259 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.7
2022-08-09 16:26:47.766 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.7 => 0
2022-08-09 16:26:48.345 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.7
2022-08-09 16:26:49.447 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.7 => 0
2022-08-09 16:26:49.657 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.8
2022-08-09 16:26:51.110 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.8 => 0
2022-08-09 16:26:51.330 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.8
2022-08-09 16:26:52.772 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.8 => 0
2022-08-09 16:26:52.988 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.7
2022-08-09 16:26:54.475 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.7 => 0
2022-08-09 16:26:54.689 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.7
2022-08-09 16:26:56.161 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.7 => 0
2022-08-09 16:26:56.370 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.8
2022-08-09 16:26:57.830 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.8 => 0
2022-08-09 16:26:58.039 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.7
2022-08-09 16:26:59.554 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.7 => 0
2022-08-09 16:26:59.769 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.8
2022-08-09 16:27:01.215 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0.8 => 0
2022-08-09 16:27:01.430 INFO ZWAVE: Node 35: value updated: 50-0-value-66049 0 => 0.7

The plug = Z-Wave JS Config DB Browser

I’ve tried changing the reporting intervals to their max values and there is no change… any suggestions outside of just disabling that entity?