1.5.0 Feedback

WonderMoose · November 28, 2018, 2:16pm

No solution, sorry. But how did you change the top colour and icons in the bottom to match your theme?

Khole · November 28, 2018, 6:18pm

I use a theme somebody else created on a HA thread. I cannot remember which one it was but below is a copy of the theme config for the frontend.

github.com

KJonline/HA_Config/blob/master/Frontend.txt

themes:
  happy:
    primary-color: black
  midnight:
    # Main colors
    primary-color: red                                                        # Header
    accent-color: '#E45E65'                                                         # Accent color
    dark-primary-color: 'var(--accent-color)'                                       # Hyperlinks                                         
    light-primary-color: 'var(--accent-color)'                                      # Horizontal line in about
                                                                             
    # Text colors                                                                  
    primary-text-color: '#FFFFFF'                                                   # Primary text colour, here is referencing dark-primary-color
    text-primary-color: 'var(--primary-text-color)'                                 # Primary text colour
    secondary-text-color: '#5294E2'                                                 # For secondary titles in more info boxes etc.
    disabled-text-color: '#7F848E'                                                  # Disabled text colour
    label-badge-border-color: 'green'                                               # Label badge border, just a reference value     

    # Background colors                                                            
    primary-background-color: '#383C45'                                             # Settings background
    secondary-background-color: '#383C45'                                           # Main card UI background

This file has been truncated. show original

Sorry I cannot be anymore help.

WonderMoose · November 28, 2018, 8:44pm

Thanks a lot. I will have a look into it

tom_l · November 29, 2018, 3:49am

ibeacons are not working at all. I’m going back to Owntracks.

deluxestyle · November 29, 2018, 6:34am

I‘m the only one who denies location services for the app? I get always the pop up to allow them. Even if I deny

Vincent · November 29, 2018, 7:42am

1.5.0 (27) have solved this post (automation trigger on enter/excite zone when phone is locked)

will test tonight with the 1.5.0 (29)

tom_l · November 29, 2018, 12:39pm

Updated to 1.5.0 (29) as a final try before my planned switch back to owntracks and got the first ibeacon notification since I started using the app!

RobDYI · November 29, 2018, 11:15pm

I am getting a “Login attempt or request with invalid authentication from 192.168.x.x (my HA ip)” from my latest beta ios actionable notification. I am trying on the same lan as home assistant but with my https / outside url in the app. I used my legacy api password to setup the ios app and everything works from the app. I copied the ios actionable example but i keep getting invalid authentication. It use to work about a month ago. Thanks

Vincent · November 30, 2018, 6:51am

tryied 1.5.0 (29) , and also working good for solving this post (automation trigger on enter/excite zone when phone is locked)

tom_l · November 30, 2018, 8:14am

Yeah 29 is working well for me. I had what I thought was a beacon entry alert reported as an exit but it was just a quick exit/enter in succession as shown in the logs. I have found a beacon black spot in my house that needs filling in.

Sunonline · November 30, 2018, 3:47pm

Done. Works ok now with 30

metec · December 12, 2018, 6:42pm

I cannot get gps or ibeacons to work properly. I disconnected my ibeacons to test and I received the exit notification and the device state changed to home. Later, when I tried the same, the state changed from home to away after disconnecting from the ibeacons but, I have a separate (not home) zone around my house so it should have shown this zone and not away. If I manually update the location, the state changes from away to this zone. This is on version (31).

jchong · December 17, 2018, 9:19pm

I’m on build 32 and have noticed that it doesn’t notify Home-Assistant when I’m arriving home.

I have the iOS notifications configured to alert me when I enter a zone and I do receive the notification that I’m in the home zone as I’m arriving so it appears to be working. But HA doesn’t get the notification so my “arrive home” automations do not get triggered (they often run after I’ve been home for 15+ minutes).

Kazakaz · December 20, 2018, 1:21am

I’m having the same issue. I get the enter zone notification, but doesn’t push to HA. If I do a manual update, it reports my location and triggers my automations.

yan · December 23, 2018, 10:32pm

I have an similiar issue.
My Tracking is on, but motion is off.
Everytime I Start the App, I get an Information, that it was previously activated but now it’s deactivated and if I want to activate it again.

First, I don‘t understand why this app needs the rights for motion and Fitness tracking.
Second, if I said no, it means no. There is no need to ask me over and over again

gerard33 · December 23, 2018, 11:01pm

Same here on 1.5.0 (32). Will revert back to v31 to see if that was the version where it still worked fine.

gerard33 · December 28, 2018, 4:54pm

I reverted to v30 and there the location updates (gps) are working fine and show correctly in HA. So after v31 something has changed related to this which caused the updates not to be shown in HA.

jchong · December 31, 2018, 4:37am

Reverting back to v30 fixed it for me as well (v31 had the same problem as v32).

Saturnus · January 1, 2019, 9:14pm

Any plan for an update of the public version?

DavidFW1960 · January 3, 2019, 10:31pm

it’s an iOS ‘feature’