consider it done: no % icon for Plugwise auxiliary modulation level · Issue #38238 · home-assistant/core · GitHub
We should probably call this a bug. Tom and I have discussed this and we have a plan on how to fix this.
You can help us get the fix into HA Core by reporting this as an Issue 
And, please don’t link to this topic in an Issue, let’s keep the discussions in Issues and in this topic, separated.
Configured via the integrations is what I meant by adding it manually 
And just to be clear, it’s an inconvenience and we’re indeed looking in to it
A question: is there anyone that has a legacy Anna that is still on firmware 1.8?
Does zeroconf-discovery work with the HA Core Plugwise component, in Core v0.113?
Hey,
I am trying to install the latest version 0.6.0 of the plugwise beta component.
As stated in the release notes, I removed the repository from HACS and tried to reinstall it.
I am getting a red piece of text before the installation modal disappears.
In the logs I can see that that message is: “No content to download”
I also tried to remove the integration. That didn’t fix the problem unfortunately.
How do I install the latest version of the component?
Mm apparently I had to restart Home Assistant after removing the repository in order for it to install again.
Ok, thanks. I’ll add this info to the release notes.
1 Like
just reporting the modulation icon is still incorrect, using HA 114 now and the core integration. hasn’t this been merged yet: https://github.com/home-assistant/core/issues/36669 and https://github.com/home-assistant/core/pull/36815
Apparently not. The HA devs are small in numbers and overwhelmed by the amount of Issues and PR’s.
My advise: switch to plugwise-beta v0.6.0, we’ve modified the code so that it now fully replaces Core Plugwise. If you do, be sure to read the release notes, there will be double breakage
Hopefully for the last time.
Once Core Plugwise is code-wise “the same” as Plugwise v0.6.0 you should be able to switch back to Core Plugwise by removing the custom_component. No other changes needed.
Anyone else seeing this ( no data)in the Plugwise app itsellf
The html interface does show correct data.
Is this iOS 14?
Of course… there is no data in HA either…
No, all working here.
Maybe a firmware update is ongoing?
I’ve seen something similar on my Anna.
For me the display of the Anna was completely empty, but the app was still working. Also Home Assistant was able to control the Anna.
(So it is like opposite to your situation.)
I contacted Plugwise support. I think the support is pretty good.
After opening a support connection, they were not able to figure out the exact problem on my device, but found some level of database corruption on the Smile database.
They advised me to reset to factory defaults and reconnect the smile to my wifi network.
After taking these steps I haven’t had an issue.
My advise would be to contact Plugwise support. Even though they may not be able to fix the immediate problem, it is good that they know about issues in their software and who knows, maybe they can fix it directly .
Otherwise they will advise you to do a factory reset.
Hope this helps!
Thing is , this Anna is in a room I hardly visit 
I went to have a look at the device itself and after it woke up, the connection to the App and HA was restored.
Hope it will stay alive from now on , maybe it was because all devices had seen updates: Ha, IOS and Plugwise Anna
Their support is kind of a mixed bag. I have long reported renaming the device won’t stick, they have acknowledged that being a bug, but never fixed it.
I had the same problem. My Tom’s give me the same error ‘waiting for measure’ I have made contact with the Plugwise helpdesk and they have recently updated Tom to a new firmware, Now the problem is solved.
I have a quastion guys
We have a opentherm cv and 4 rooms
All rooms have a zigbee valve that set the temp to 18 degree so our living room ia faster on temprature.
What i want now with anna is that i give every room a temp sensor so when i set bedroom on 21 that all valves close and only the bedroom goes open
Is this possible with anna as main, nodered control and zigbee valves?
I would think so? As long as the valve in the room where the Anna is, is kept closed, you can program the Anna-setpoint to a value that is above the temperature in the room so that the CV starts heating. When the room in question is warm enough, you can lower the Anna-setpoint again so that the CV stops heating.