Aeotec ZW095 reporting zero values and error in OZW logs

I recently fired an HA installation back up with an Aeotec Z-Wave stick attached, for use with my ZW095 HEM. I factory reset both devices and I am able to pair and see the node in the HA zwave interface.

However, the data is coming in with all zeroes, both in the interface and the logs. In the logs I also see ERROR: Dropping command, expected response not received after 1 attempt(s) frequently, even though it seems that the hub and the device are able to communicate.

Is my HEM just a dud now, or is there some way to get them to communicate again? Thanks in advance.

Did you re-setup the reports configurations?

I did factory resets on both the HEM and the stick, so they should be all the default values. Is there anything to set them to specifically that would help?

Use this link to grab the XML sheet and setup your sensor reporting.

I’ve tried setting parameter 101 to several of the values listed (specifically 2, 3, 6927, and 16128) and it still reports all zeroes, even after a heal and a network restart.

Is it possible you have the clamps on incorrectly?
one should have arrow facing towards your breakers, one should be pointing towards your meter.

The meter was reporting data correctly last year when I used it, and the clamps have not been moved. I opened the panel up and made sure nothing had chewed through the wires. I’ve tried every solution I’ve been able to find :confused:

Can you post your OZW_Log.txt?

No no, don’t post pictures of text.

2020-10-08 22:20:46.586 Detail, Node002, Removing current message
2020-10-08 22:20:46.586 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:46.595 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:46.613 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:46.624 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:46.633 Detail,
2020-10-08 22:20:46.633 Info, Node002, Processing (Poll) Nonce Request message (Callback ID=0x34, Expected Reply=0x04)
2020-10-08 22:20:46.633 Info, Node002, Sending (Poll) message (Callback ID=0x34, Expected Reply=0x04) - Nonce_Get(MeterCmd_Get) - 0x01, 0x09, 0x00, 0x13, 0x02, 0x02, 0x98, 0x40, 0x05, 0x02:
2020-10-08 22:20:46.641 Detail, Node002,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
2020-10-08 22:20:46.641 Detail, Node002,   ZW_SEND_DATA delivered to Z-Wave stack
2020-10-08 22:20:46.656 Detail, Node002,   Received: 0x01, 0x07, 0x00, 0x13, 0x02, 0x00, 0x00, 0x02, 0xeb
2020-10-08 22:20:46.656 Detail, Node002,   ZW_SEND_DATA Request with callback ID 0x02 received (expected 0x02)
2020-10-08 22:20:46.656 Info, Node002, Request RTT 23 Average Request RTT 53
2020-10-08 22:20:46.670 Detail, Node002,   Received: 0x01, 0x10, 0x00, 0x04, 0x00, 0x02, 0x0a, 0x98, 0x80, 0xe8, 0xd3, 0xbe, 0xb9, 0x97, 0xb7, 0x4b, 0xd5, 0x79
2020-10-08 22:20:46.670 Info, Node002, Received SecurityCmd_NonceReport from node 2
2020-10-08 22:20:46.670 Info, Node002, Sending (Poll) message (Callback ID=0x39, Expected Reply=0x04) - MeterCmd_Get (Node=2): 0x01, 0x0a, 0x00, 0x13, 0x02, 0x03, 0x32, 0x01, 0x38, 0x25, 0x39, 0xf0
2020-10-08 22:20:46.681 Detail, Node002,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
2020-10-08 22:20:46.682 Detail, Node002,   ZW_SEND_DATA delivered to Z-Wave stack
2020-10-08 22:20:46.699 Detail, Node002,   Received: 0x01, 0x07, 0x00, 0x13, 0x39, 0x00, 0x00, 0x02, 0xd0
2020-10-08 22:20:46.699 Detail, Node002,   ZW_SEND_DATA Request with callback ID 0x39 received (expected 0x39)
2020-10-08 22:20:46.699 Info, Node002, Request RTT 66 Average Request RTT 59
2020-10-08 22:20:46.699 Detail,   Expected callbackId was received
2020-10-08 22:20:49.369 Detail, Node002,   Received: 0x01, 0x08, 0x00, 0x04, 0x00, 0x02, 0x02, 0x98, 0x40, 0x2b
2020-10-08 22:20:49.370 Info, Node002, Received SecurityCmd_NonceGet from node 2
2020-10-08 22:20:49.370 Info, NONCES: 0xdd, 0x76, 0xcd, 0x2a, 0x82, 0x1f, 0x4a, 0xae
2020-10-08 22:20:49.370 Info, NONCES: 0x4a, 0xaf, 0xab, 0x86, 0x93, 0x30, 0xb6, 0x9d
2020-10-08 22:20:49.370 Info, NONCES: 0x52, 0x25, 0xb4, 0x71, 0xed, 0xbb, 0x11, 0x13
2020-10-08 22:20:49.370 Info, NONCES: 0xe3, 0x13, 0xdc, 0xaa, 0xd7, 0x88, 0xb8, 0x5b
2020-10-08 22:20:49.370 Info, NONCES: 0xed, 0xa6, 0x80, 0x35, 0xde, 0xf8, 0x94, 0x8e
2020-10-08 22:20:49.370 Info, NONCES: 0xc3, 0xbd, 0xe8, 0x60, 0xb3, 0xe1, 0x66, 0xc4
2020-10-08 22:20:49.370 Info, NONCES: 0xf7, 0xc9, 0xe4, 0x47, 0x0f, 0xb9, 0xe2, 0xee
2020-10-08 22:20:49.370 Info, NONCES: 0xf2, 0x17, 0x29, 0x29, 0x3c, 0x36, 0xe2, 0xbf
2020-10-08 22:20:49.370 Info, Node002, Sending (Poll) message (Callback ID=0x01, Expected Reply=0x04) - Nonce_Report - 0x01, 0x11, 0x00, 0x13, 0x02, 0x0a, 0x98, 0x80, 0xed, 0xa6, 0x80, 0x35, 0xde, 0xf8, 0x94, 0x8e, 0x05, 0x01, 0x2b:
2020-10-08 22:20:49.378 Detail, Node002,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
2020-10-08 22:20:49.378 Detail, Node002,   ZW_SEND_DATA delivered to Z-Wave stack
2020-10-08 22:20:49.395 Detail, Node002,   Received: 0x01, 0x07, 0x00, 0x13, 0x01, 0x00, 0x00, 0x03, 0xe9
2020-10-08 22:20:49.395 Detail, Node002,   ZW_SEND_DATA Request with callback ID 0x01 received (expected 0x01)
2020-10-08 22:20:49.395 Info, Node002, Request RTT 2762 Average Request RTT 1410
2020-10-08 22:20:49.419 Detail, Node002,   Received: 0x01, 0x2c, 0x00, 0x04, 0x00, 0x02, 0x26, 0x98, 0x81, 0x6b, 0xb8, 0x51, 0x87, 0xbc, 0xdd, 0xe5, 0x52, 0xa8, 0x54, 0x7e, 0x7f, 0x0b, 0x5d, 0xf6, 0xf8, 0x5a, 0x27, 0x52, 0x65, 0x5f, 0x67, 0x1c, 0x4d, 0x5e, 0x45, 0x13, 0xed, 0x08, 0x6a, 0x51, 0x36, 0xf2, 0x11, 0x2e, 0xe9, 0x7b
2020-10-08 22:20:49.419 Info, Raw: 0x98, 0x81, 0x6b, 0xb8, 0x51, 0x87, 0xbc, 0xdd, 0xe5, 0x52, 0xa8, 0x54, 0x7e, 0x7f, 0x0b, 0x5d, 0xf6, 0xf8, 0x5a, 0x27, 0x52, 0x65, 0x5f, 0x67, 0x1c, 0x4d, 0x5e, 0x45, 0x13, 0xed, 0x08, 0x6a, 0x51, 0x36, 0xf2, 0x11, 0x2e, 0xe9, 0x7b
2020-10-08 22:20:49.419 Detail, Node002, Decrypted Packet: 0x00, 0x56, 0x01, 0x32, 0x02, 0x21, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0xad, 0xf4
2020-10-08 22:20:49.419 Detail,
2020-10-08 22:20:49.419 Info, Node002, Response RTT 2787 Average Response RTT 1559
2020-10-08 22:20:49.419 Info, Node002, Received CRC16-command from node 2
2020-10-08 22:20:49.419 Detail, Node002, Refreshed Value: old value=false, new value=false, type=bool
2020-10-08 22:20:49.419 Detail, Node002, Changes to this value are not verified
2020-10-08 22:20:49.420 Info, Node002, Received Meter report from node 2: Power=0.000W
2020-10-08 22:20:49.420 Detail, Node002, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 22:20:49.420 Detail, Node002, Changes to this value are not verified
2020-10-08 22:20:49.420 Info, Node002,     Previous value was 0.000W, received 4 seconds ago.
2020-10-08 22:20:49.420 Detail, Node002, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 22:20:49.420 Detail, Node002, Changes to this value are not verified
2020-10-08 22:20:49.420 Detail, Node002, Refreshed Value: old value=1, new value=4, type=int
2020-10-08 22:20:49.420 Detail, Node002, Changes to this value are not verified
2020-10-08 22:20:49.420 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:49.430 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:49.446 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:49.451 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:54.369 Detail, Node002,   Received: 0x01, 0x08, 0x00, 0x04, 0x00, 0x02, 0x02, 0x98, 0x40, 0x2b
2020-10-08 22:20:54.369 Info, Node002, Received SecurityCmd_NonceGet from node 2
2020-10-08 22:20:54.369 Info, NONCES: 0xdd, 0x76, 0xcd, 0x2a, 0x82, 0x1f, 0x4a, 0xae
2020-10-08 22:20:54.369 Info, NONCES: 0x4a, 0xaf, 0xab, 0x86, 0x93, 0x30, 0xb6, 0x9d
2020-10-08 22:20:54.369 Info, NONCES: 0x52, 0x25, 0xb4, 0x71, 0xed, 0xbb, 0x11, 0x13
2020-10-08 22:20:54.369 Info, NONCES: 0xe3, 0x13, 0xdc, 0xaa, 0xd7, 0x88, 0xb8, 0x5b
2020-10-08 22:20:54.370 Info, NONCES: 0xed, 0xa6, 0x80, 0x35, 0xde, 0xf8, 0x94, 0x8e
2020-10-08 22:20:54.370 Info, NONCES: 0xe5, 0x4a, 0x58, 0x61, 0x4e, 0x87, 0xb2, 0x23
2020-10-08 22:20:54.370 Info, NONCES: 0xf7, 0xc9, 0xe4, 0x47, 0x0f, 0xb9, 0xe2, 0xee
2020-10-08 22:20:54.370 Info, NONCES: 0xf2, 0x17, 0x29, 0x29, 0x3c, 0x36, 0xe2, 0xbf
2020-10-08 22:20:54.370 Info, Node002, Sending (Poll) message (Callback ID=0x01, Expected Reply=0x04) - Nonce_Report - 0x01, 0x11, 0x00, 0x13, 0x02, 0x0a, 0x98, 0x80, 0xe5, 0x4a, 0x58, 0x61, 0x4e, 0x87, 0xb2, 0x23, 0x05, 0x01, 0x27:
2020-10-08 22:20:54.379 Detail, Node002,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
2020-10-08 22:20:54.379 Detail, Node002,   ZW_SEND_DATA delivered to Z-Wave stack
2020-10-08 22:20:54.396 Detail, Node002,   Received: 0x01, 0x07, 0x00, 0x13, 0x01, 0x00, 0x00, 0x03, 0xe9
2020-10-08 22:20:54.396 Detail, Node002,   ZW_SEND_DATA Request with callback ID 0x01 received (expected 0x01)
2020-10-08 22:20:54.396 Info, Node002, Request RTT 7763 Average Request RTT 4586
2020-10-08 22:20:54.418 Detail, Node002,   Received: 0x01, 0x2c, 0x00, 0x04, 0x00, 0x02, 0x26, 0x98, 0x81, 0xab, 0x92, 0xe8, 0x3d, 0xc5, 0x84, 0x41, 0x88, 0xc3, 0xbb, 0x49, 0x09, 0x12, 0x37, 0x07, 0x8d, 0xa2, 0xa3, 0x6f, 0xc0, 0xba, 0x26, 0x77, 0xe1, 0x9a, 0x8e, 0xab, 0xe5, 0x7f, 0x99, 0x16, 0x50, 0x60, 0xf0, 0x67, 0x60, 0xd0
2020-10-08 22:20:54.419 Info, Raw: 0x98, 0x81, 0xab, 0x92, 0xe8, 0x3d, 0xc5, 0x84, 0x41, 0x88, 0xc3, 0xbb, 0x49, 0x09, 0x12, 0x37, 0x07, 0x8d, 0xa2, 0xa3, 0x6f, 0xc0, 0xba, 0x26, 0x77, 0xe1, 0x9a, 0x8e, 0xab, 0xe5, 0x7f, 0x99, 0x16, 0x50, 0x60, 0xf0, 0x67, 0x60, 0xd0
2020-10-08 22:20:54.419 Detail, Node002, Decrypted Packet: 0x00, 0x56, 0x01, 0x32, 0x02, 0x21, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x07, 0xa5
2020-10-08 22:20:54.419 Detail,
2020-10-08 22:20:54.419 Info, Node002, Response RTT 7787 Average Response RTT 4673
2020-10-08 22:20:54.419 Info, Node002, Received CRC16-command from node 2
2020-10-08 22:20:54.419 Detail, Node002, Refreshed Value: old value=false, new value=false, type=bool
2020-10-08 22:20:54.419 Detail, Node002, Changes to this value are not verified
2020-10-08 22:20:54.419 Info, Node002, Received Meter report from node 2: Power=0.000W
2020-10-08 22:20:54.420 Detail, Node002, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 22:20:54.420 Detail, Node002, Changes to this value are not verified
2020-10-08 22:20:54.420 Info, Node002,     Previous value was 0.000W, received 5 seconds ago.
2020-10-08 22:20:54.420 Detail, Node002, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 22:20:54.420 Detail, Node002, Changes to this value are not verified
2020-10-08 22:20:54.420 Detail, Node002, Refreshed Value: old value=4, new value=5, type=int
2020-10-08 22:20:54.420 Detail, Node002, Changes to this value are not verified
2020-10-08 22:20:54.420 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:54.432 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:54.441 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:54.446 Detail, Node002, Notification: ValueChanged
2020-10-08 22:20:56.633 Error, Node002, ERROR: Dropping command, expected response not received after 1 attempt(s)
2020-10-08 22:20:56.633 Detail, Node002, Removing current message
2020-10-08 22:20:56.633 Detail, Node002, Notification: Notification - TimeOut

Here you go.

Exclude your device from your zwave network.
Re-include the device without using the Add Secure Node just use Add Node

See if that helps, you’re adding 200% traffic overhead for no reason.

Already tried that, no change. Did it again and posted new log for reference. Interestingly the error is gone now but it’s still reporting zeroes.

2020-10-08 23:13:56.012 Info, Node003, Received CRC16-command from node 3
2020-10-08 23:13:56.012 Detail, Node003, Refreshed Value: old value=false, new value=false, type=bool
2020-10-08 23:13:56.012 Detail, Node003, Changes to this value are not verified
2020-10-08 23:13:56.012 Info, Node003, Received Meter report from node 3: Power=0.000W
2020-10-08 23:13:56.012 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:13:56.012 Detail, Node003, Changes to this value are not verified
2020-10-08 23:13:56.012 Info, Node003,     Previous value was 0.000W, received 5 seconds ago.
2020-10-08 23:13:56.012 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:13:56.012 Detail, Node003, Changes to this value are not verified
2020-10-08 23:13:56.012 Detail, Node003, Refreshed Value: old value=5, new value=5, type=int
2020-10-08 23:13:56.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:13:56.013 Detail, Node003, Notification: ValueChanged
2020-10-08 23:13:56.023 Detail, Node003, Notification: ValueChanged
2020-10-08 23:13:56.040 Detail, Node003, Notification: ValueChanged
2020-10-08 23:13:56.045 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:01.011 Detail, Node003,   Received: 0x01, 0x18, 0x00, 0x04, 0x00, 0x03, 0x12, 0x56, 0x01, 0x32, 0x02, 0x21, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x07, 0xa5, 0x67
2020-10-08 23:14:01.012 Detail,
2020-10-08 23:14:01.012 Info, Node003, Received CRC16-command from node 3
2020-10-08 23:14:01.012 Detail, Node003, Refreshed Value: old value=false, new value=false, type=bool
2020-10-08 23:14:01.012 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:01.012 Info, Node003, Received Meter report from node 3: Power=0.000W
2020-10-08 23:14:01.012 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:14:01.012 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:01.012 Info, Node003,     Previous value was 0.000W, received 5 seconds ago.
2020-10-08 23:14:01.012 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:14:01.012 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:01.012 Detail, Node003, Refreshed Value: old value=5, new value=5, type=int
2020-10-08 23:14:01.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:01.013 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:01.022 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:01.038 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:01.045 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:06.012 Detail, Node003,   Received: 0x01, 0x18, 0x00, 0x04, 0x00, 0x03, 0x12, 0x56, 0x01, 0x32, 0x02, 0x21, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x07, 0xa5, 0x67
2020-10-08 23:14:06.012 Detail,
2020-10-08 23:14:06.013 Info, Node003, Received CRC16-command from node 3
2020-10-08 23:14:06.013 Detail, Node003, Refreshed Value: old value=false, new value=false, type=bool
2020-10-08 23:14:06.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:06.013 Info, Node003, Received Meter report from node 3: Power=0.000W
2020-10-08 23:14:06.013 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:14:06.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:06.013 Info, Node003,     Previous value was 0.000W, received 5 seconds ago.
2020-10-08 23:14:06.013 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:14:06.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:06.013 Detail, Node003, Refreshed Value: old value=5, new value=5, type=int
2020-10-08 23:14:06.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:06.013 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:06.023 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:06.038 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:06.045 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:11.012 Detail, Node003,   Received: 0x01, 0x18, 0x00, 0x04, 0x00, 0x03, 0x12, 0x56, 0x01, 0x32, 0x02, 0x21, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x07, 0xa5, 0x67
2020-10-08 23:14:11.012 Detail,
2020-10-08 23:14:11.012 Info, Node003, Received CRC16-command from node 3
2020-10-08 23:14:11.012 Detail, Node003, Refreshed Value: old value=false, new value=false, type=bool
2020-10-08 23:14:11.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:11.013 Info, Node003, Received Meter report from node 3: Power=0.000W
2020-10-08 23:14:11.013 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:14:11.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:11.013 Info, Node003,     Previous value was 0.000W, received 5 seconds ago.
2020-10-08 23:14:11.013 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:14:11.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:11.013 Detail, Node003, Refreshed Value: old value=5, new value=5, type=int
2020-10-08 23:14:11.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:11.013 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:11.023 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:11.035 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:11.040 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:16.012 Detail, Node003,   Received: 0x01, 0x18, 0x00, 0x04, 0x00, 0x03, 0x12, 0x56, 0x01, 0x32, 0x02, 0x21, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x07, 0xa5, 0x67
2020-10-08 23:14:16.012 Detail,
2020-10-08 23:14:16.013 Info, Node003, Received CRC16-command from node 3
2020-10-08 23:14:16.013 Detail, Node003, Refreshed Value: old value=false, new value=false, type=bool
2020-10-08 23:14:16.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:16.013 Info, Node003, Received Meter report from node 3: Power=0.000W
2020-10-08 23:14:16.013 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:14:16.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:16.013 Info, Node003,     Previous value was 0.000W, received 5 seconds ago.
2020-10-08 23:14:16.013 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:14:16.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:16.013 Detail, Node003, Refreshed Value: old value=5, new value=5, type=int
2020-10-08 23:14:16.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:16.013 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:16.023 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:16.037 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:16.045 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:21.012 Detail, Node003,   Received: 0x01, 0x18, 0x00, 0x04, 0x00, 0x03, 0x12, 0x56, 0x01, 0x32, 0x02, 0x21, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x07, 0xa5, 0x67
2020-10-08 23:14:21.012 Detail,
2020-10-08 23:14:21.012 Info, Node003, Received CRC16-command from node 3
2020-10-08 23:14:21.012 Detail, Node003, Refreshed Value: old value=false, new value=false, type=bool
2020-10-08 23:14:21.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:21.013 Info, Node003, Received Meter report from node 3: Power=0.000W
2020-10-08 23:14:21.013 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:14:21.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:21.013 Info, Node003,     Previous value was 0.000W, received 5 seconds ago.
2020-10-08 23:14:21.013 Detail, Node003, Refreshed Value: old value=0.000, new value=0.000, type=decimal
2020-10-08 23:14:21.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:21.013 Detail, Node003, Refreshed Value: old value=5, new value=5, type=int
2020-10-08 23:14:21.013 Detail, Node003, Changes to this value are not verified
2020-10-08 23:14:21.013 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:21.023 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:21.031 Detail, Node003, Notification: ValueChanged
2020-10-08 23:14:21.037 Detail, Node003, Notification: ValueChanged

Well it’s a start, try setting those configurations again, now that we have the comms errors cleared up.

No dice. I’m thinking the clamps have gone bad somehow…every communication between the device and the hub seems fine.

Pretty sure CT clamps don’t go bad.

What do your config values show in ozw-admin?

Here’s mine to compare:

Tried all those values, still no change, though I don’t seem to have the first two options on the z-wave config panel (I’m using HA’s built-in integration)

Is your HEM perhaps battery powered?

Nope, plugged into the wall.

I’m fresh out of ideas then :frowning: it sounds like your HEM has bit the dust.

Meanwhile I begin to hate z-wave integration… this concept and the small transmission distance drove me crazy very often. To much time IMHO for reliable home-automation for common users.

@Rox897, please post your first 100 lines from OZW_Log.txt after restart homeassistant