Can't see config folder using Samba

Suddenly I can’t see the config folder using Samba. Raspberry Pi 3, Windows 10
I’ve restarted Samba but to no avail. Help!
Any suggestions?

Samba log shows other subfolders but not config

added interface wlan0 ip=192.168.1.108 bcast=192.168.1.255 netmask=255.255.255.0
added interface eth0 ip=2a02:c7c:b235:3d00:9f5e:3afe:8e01:52a bcast= netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=fda1:8d6f:ea34:0:c9af:4801:d5c3:650e bcast= netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=192.168.1.109 bcast=192.168.1.255 netmask=255.255.255.0
making subnet name:192.168.1.109 Broadcast address:192.168.1.255 Subnet mask:255.255.255.0
create_subnets: ignoring non IPv4 interface.
create_subnets: ignoring non IPv4 interface.
making subnet name:192.168.1.108 Broadcast address:192.168.1.255 Subnet mask:255.255.255.0
create_subnets: ignoring non IPv4 interface.
create_subnets: ignoring non IPv4 interface.
create_subnets: Ignoring loopback interface.
making subnet name:UNICAST_SUBNET Broadcast address:0.0.0.0 Subnet mask:0.0.0.0
making subnet name:REMOTE_BROADCAST_SUBNET Broadcast address:0.0.0.0 Subnet mask:0.0.0.0
added interface lo ip=127.0.0.1 bcast=127.255.255.255 netmask=255.0.0.0
added interface wlan0 ip=2a02:c7c:b235:3d00:6266:d583:ff34:946a bcast= netmask=ffff:ffff:ffff:ffff::
added interface wlan0 ip=fda1:8d6f:ea34:0:7e6a:f797:d69d:818b bcast= netmask=ffff:ffff:ffff:ffff::
added interface wlan0 ip=192.168.1.108 bcast=192.168.1.255 netmask=255.255.255.0
added interface eth0 ip=2a02:c7c:b235:3d00:9f5e:3afe:8e01:52a bcast= netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=fda1:8d6f:ea34:0:c9af:4801:d5c3:650e bcast= netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=192.168.1.109 bcast=192.168.1.255 netmask=255.255.255.0
smbd version 4.18.8 started.
Copyright Andrew Tridgell and the Samba Team 1992-2023
uid=0 gid=0 euid=0 egid=0
Registered MSG_REQ_POOL_USAGE
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
Processing section “[homeassistant]”
Processing section “[addons]”
Processing section “[addon_configs]”
Processing section “[ssl]”
Processing section “[share]”
Processing section “[backup]”
Processing section “[media]”
added interface lo ip=127.0.0.1 bcast=127.255.255.255 netmask=255.0.0.0
added interface wlan0 ip=2a02:c7c:b235:3d00:6266:d583:ff34:946a bcast= netmask=ffff:ffff:ffff:ffff::
added interface wlan0 ip=fda1:8d6f:ea34:0:7e6a:f797:d69d:818b bcast= netmask=ffff:ffff:ffff:ffff::
added interface wlan0 ip=192.168.1.108 bcast=192.168.1.255 netmask=255.255.255.0
added interface eth0 ip=2a02:c7c:b235:3d00:9f5e:3afe:8e01:52a bcast= netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=fda1:8d6f:ea34:0:c9af:4801:d5c3:650e bcast= netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=192.168.1.109 bcast=192.168.1.255 netmask=255.255.255.0
INFO: Profiling support unavailable in this build.
Registered MSG_REQ_POOL_USAGE
No builtin backend found, trying to load plugin
Registered MSG_REQ_POOL_USAGE
Registered MSG_REQ_POOL_USAGE
waiting for connections
check_for_master_browser_fail: Forcing election on workgroup WORKGROUP subnet 192.168.1.108
check_for_master_browser_fail: Forcing election on workgroup WORKGROUP subnet 192.168.1.109
send_election_dgram: Sending election packet for workgroup WORKGROUP on subnet 192.168.1.108
send_election_dgram: Sending election packet for workgroup WORKGROUP on subnet 192.168.1.109
send_election_dgram: Sending election packet for workgroup WORKGROUP on subnet 192.168.1.108
send_election_dgram: Sending election packet for workgroup WORKGROUP on subnet 192.168.1.109
send_election_dgram: Sending election packet for workgroup WORKGROUP on subnet 192.168.1.108
send_election_dgram: Sending election packet for workgroup WORKGROUP on subnet 192.168.1.109
send_election_dgram: Sending election packet for workgroup WORKGROUP on subnet 192.168.1.108
send_election_dgram: Sending election packet for workgroup WORKGROUP on subnet 192.168.1.109
send_election_dgram: Sending election packet for workgroup WORKGROUP on subnet 192.168.1.108
run_elections: >>> Won election for workgroup WORKGROUP on subnet 192.168.1.108 <<<
become_local_master_browser: Starting to become a master browser for workgroup WORKGROUP on subnet 192.168.1.108
send_election_dgram: Sending election packet for workgroup WORKGROUP on subnet 192.168.1.109
run_elections: >>> Won election for workgroup WORKGROUP on subnet 192.168.1.109 <<<
become_local_master_browser: Starting to become a master browser for workgroup WORKGROUP on subnet 192.168.1.109


Samba name server HOMEASSISTANT is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.108



Samba name server HOMEASSISTANT is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.109


Registered MSG_REQ_POOL_USAGE
check_ntlm_password: authentication for user [pjrhassio] → [pjrhassio] → [pjrhassio] succeeded
Processing section “[homeassistant]”
Processing section “[addons]”
Processing section “[addon_configs]”
Processing section “[ssl]”
Processing section “[share]”
Processing section “[backup]”
Processing section “[media]”
idmap range not specified for domain ‘*’
eapr210920886-1 (ipv4:192.168.1.71:64103) signed connect to service backup initially as user root (uid=0, gid=0) (pid 160)
Registered MSG_REQ_POOL_USAGE
Processing section “[homeassistant]”
Processing section “[addons]”
Processing section “[addon_configs]”
Processing section “[ssl]”
Processing section “[share]”
Processing section “[backup]”
Processing section “[media]”
Registered MSG_REQ_POOL_USAGE
netbios connect: name1=LOCALHOST 0x20 name2=HOMEASSISTANT 0x0
netbios connect: local=localhost remote=homeassistant, name type = 0
Processing section “[homeassistant]”
Processing section “[addons]”
Processing section “[addon_configs]”
Processing section “[ssl]”
Processing section “[share]”
Processing section “[backup]”
Processing section “[media]”

Check the IP address under System - Network - IP4. After update of samba, my IP for my Home Assistant Yellow changed from ###.###.#.147 to ###.###.#.84 and the changed also, IP address was set for static also before the update, it changed to auto.

In the router I had the IP Addresses reserved for 147, but that didn’t prevent the change.

Samba add-on changed /config to /homeassistant - Configuration - Home Assistant Community (home-assistant.io)

Ah - It seems they changed the name of the folder

They are changing it back. Don’t do anything drastic right now.

1 Like

THIS

Dev already knows they created confusion here and already plans to revert. There’s another large thread discussing it. Don’t do anything drastic that will break anything worse.

I just got the notification of the update changing it back.