Same as ZHA - Philips Hue Dimmer Switch (RWL020, RWL021) but for deconz
blueprint:
name: Deconz - Philips Hue Dimmer Switch
description: |
Control lights with a Philips Hue Dimmer Switch.
The top "on" button will turn the lights on to the last set brightness
(unless the force brightness is toggled on in the blueprint).
Dim up/down buttons will change the brightness smoothly and can be pressed
and hold until the brightness is satisfactory.
The bottom "off" button will turn the lights off.
domain: automation
input:
remote:
name: Remote
description: The remote to use
selector:
device:
integration: deconz
manufacturer: Philips
model: RWL021
light:
name: Light(s)
description: The light(s) to control
selector:
target:
entity:
domain: light
force_brightness:
name: Force turn on brightness
description: >
Force the brightness to the set level below, when the "on" button on
the remote is pushed and lights turn on.
default: false
selector:
boolean:
brightness:
name: Brightness
description: Brightness of the light(s) when turning on
default: 100
selector:
number:
min: 0
max: 100
mode: slider
step: 1
unit_of_measurement: "%"
mode: restart
max_exceeded: silent
variables:
force_brightness: !input force_brightness
trigger:
- platform: event
event_type: deconz_event
event_data:
device_id: !input remote
action:
- variables:
event: "{{ trigger.event.data.event }}"
- choose:
- conditions:
- "{{ event == 1000 }}"
sequence:
- choose:
- conditions: "{{ force_brightness }}"
sequence:
- service: light.turn_on
target: !input light
data:
transition: 1
brightness_pct: !input brightness
default:
- service: light.turn_on
target: !input light
data:
transition: 1
- conditions:
- "{{ event == 4000 }}"
sequence:
- service: light.turn_off
target: !input light
data:
transition: 1
###########
# Raise Dim
###########
# Press
- conditions:
- "{{ event == 2000 }}"
sequence:
- service: light.turn_on
target: !input light
data:
brightness_step_pct: 10
transition: 1
# Hold
- conditions:
- "{{ event == 2001 }}"
sequence:
- service: light.turn_on
target: !input light
data:
brightness_step_pct: 25
transition: 1
###########
# Lower Dim
###########
# Press
- conditions:
- "{{ event == 3000 }}"
sequence:
- service: light.turn_on
target: !input light
data:
brightness_step_pct: -10
transition: 1
# Hold
- conditions:
- "{{ event == 3001 }}"
sequence:
- service: light.turn_on
target: !input light
data:
brightness_step_pct: -25
transition: 1
9 Likes
Nice! You should be able to support both the US and EU variants of the switch. The devices are identical outside of the reported model numbers.
I solved for it like this: ZHA - Philips Hue Dimmer Switch (RWL020, RWL021)
I will implement that too. Only other thing is by clicking the on button should change white balance (maybe color) as it does original
2 Likes
Oh nice! I had no idea. I’ll mimic whatever you come up with.
Another solution is to have multiple buttons control multiple lights. Brightness control can then be done by different button presses. This is my implementation (not a blueprint yet )
- alias: '[bedroom|light] Toggle independent bedroom lights'
mode: single
trigger:
platform: event
event_type: deconz_event
action:
- choose:
- conditions: ################## CONDITIONS BELOW ARE FOR QUICK PRESS-RELEASE ##################
- condition: template
value_template: "{{ trigger.event.data.event == 1002 }}" # X000 means quick-press X002 means quick-press release
sequence:
- service: light.toggle
entity_id:
- light.bedroom_ceiling_lights
- delay:
milliseconds: 100
- condition: state
entity_id: light.bedroom_1
state: 'on'
- service: switch.flux_bedroom_fast_update
- conditions:
- condition: template
value_template: "{{ trigger.event.data.event == 2002 }}"
sequence:
- service: light.toggle
entity_id:
- light.bedside_left
- delay:
milliseconds: 100
- condition: state
entity_id: light.bedside_left
state: 'on'
- service: switch.flux_bedroom_fast_update
- conditions:
- condition: template
value_template: "{{ trigger.event.data.event == 3002 }}"
sequence:
- service: light.toggle
entity_id:
- light.bedside_right
- delay:
milliseconds: 100
- condition: state
entity_id: light.bedside_right
state: 'on'
- service: switch.flux_bedroom_fast_update
- conditions:
- condition: template
value_template: "{{ trigger.event.data.event == 4002 }}"
sequence:
- service: light.toggle
entity_id:
- light.ledstrip_bed
- delay:
milliseconds: 100
- condition: state
entity_id: light.bedside_right
state: 'on'
- service: switch.flux_bedroom_fast_update
- conditions: ################## CONDITIONS BELOW ARE FOR LONG PRESS ##################
- condition: template
value_template: "{{ trigger.event.data.event == 1001 }}"
sequence:
- service: light.turn_on
data:
brightness_step_pct: 10
entity_id:
- light.bedroom_1
- light.bedroom_2
- light.bedroom_3
- delay:
milliseconds: 100
- service: switch.flux_bedroom_fast_update
- conditions:
- condition: template
value_template: "{{ trigger.event.data.event == 2001 }}"
sequence:
- service: light.turn_on
data:
brightness_step_pct: 10
entity_id:
- light.bedside_left
- delay:
milliseconds: 100
- service: switch.flux_bedroom_fast_update
- conditions:
- condition: template
value_template: "{{ trigger.event.data.event == 3001 }}"
sequence:
- service: light.turn_on
data:
brightness_step_pct: 10
entity_id:
- light.bedside_right
- delay:
milliseconds: 100
- service: switch.flux_bedroom_fast_update
- conditions:
- condition: template
value_template: "{{ trigger.event.data.event == 4001 }}"
sequence:
- service: light.turn_on
data:
brightness_step_pct: 10
entity_id:
- light.ledstrip_bed
- delay:
milliseconds: 100
- service: switch.flux_bedroom_fast_update
maxtone66
December 22, 2020, 5:24pm
6
Thanks @aleksander.lyse and I can add these elements for those who want to have random color and white lights by pressing one of the two middle buttons
- conditions:
- '{{ event == 2003 }}'
sequence:
- service: light.turn_on
target: !input 'light'
data:
hs_color:
- "{{ range(360)|random }}"
- "{{ range(80,101)|random }}"
- conditions:
- '{{ event == 3003 }}'
sequence:
- service: light.turn_on
target: !input 'light'
data:
rgb_color: [255,255,255]```
Jokerigno
January 5, 2021, 12:22pm
7
Hi, I feel stupid asking this but I have an issue. I imported blue print, added a title, and selected my switch and light entity from the drop down menu. Then I hit save.
What is strange is that the automation is not in the list of all automation. I searched for it in config and dev/tools. What I’m missing?
Do you have a file called automations.yaml in your home directory? Automations condigured in the UI can only be written to automations.yaml and if you split up your setup with packages or similar it won’t work.
Like this you get the best of both worlds:
homeassistant:
packages: !include_dir_named packages/
automation: !include automations.yaml
1 Like
Jokerigno
January 5, 2021, 1:55pm
9
wow. That was easy! Thank you very much. Works like a charm!
brendan
March 23, 2021, 11:18pm
10
I really appreciate your hard work on this. Big thank you from me.
2badmice
September 3, 2024, 6:31pm
12
With the recent update to Deconz 7.0.0 I feel my Blueprint isn’t working, as all my switches become unavailable.
Has anyone noticed this issue?
2badmice
September 9, 2024, 6:33pm
13
Hi
Since Deconz 7.0.0 update
The following error happens in the blueprint.
Can you help?
Error: UndefinedError: ‘dict object’ has no attribute ‘event’
2badmice
September 12, 2024, 6:01pm
14
Could anyone, jump in and take a look?
