It seems that Lan Live View does not work for all cameras. This is the case for me:
Cam EZVIZ C3X V5.2.5 built 231016 and LC3 V5.3.4 built 230629
EZVIZ PC STUDIO 2.2.1
Ezviz Iphone App 6.1.0
1/ In the iPhone app, / Configuration/ Lan Live View, on the same WiFi network, does not work. No cameras found.
2/ With EVZIZ PC STUDIO, the modification in appconfig.ini ([LocalOperation]/Show=1) does not work: the extensions do not appear).
3/ In Line Live View, if you click on the magnifying glass, you can enter the IP of the camera, the port (8000) the account identifier (admin) and the password (Verification code on the label of the camera).
The only problem as far as I’m concerned, in the French version at least, is that the numbers in the IP address can only be separated by a comma whereas a period is required! New despair…
4/ The solution consists of a) Create an address in the iPhone address book including the IP number (with dots) as the address entry and b) by pressing the area, copy and paste with this address.
And there, my little gases, the system very quickly recognizes the camera and by clicking on it you have a menu to activate RTPS. To safeguard. Miracle, HA now recognizes the camera.
Finally:
1/ Nothing to do with Ezviz PC studio
2/ Manually enter the camera data into Line Live View, overcoming the comma bug by copying and pasting.
3/ Activate RPTS
Thank you EZVIZ
I don’t get your part 4. Creating an address is the address book? Can you be more specific?
I tried adding the camera manually, but it still says ‘connection failed’.
Can you help me out? I have the BC1C.
Thanks!
Hello, thank you for sharing your solution, I have a problem regarding scanning LAN devices, since when it asks me for username and password, when entering them, they tell me that the credentials are not valid, which is strange, because I am 100% sure that they are fine
Add your camera - for me, it found my DB1 Pro on the network where the Ezviz Studio did not. Usual creds to get the LAN live viewing through Android worked to get me access
You can then access the camera settings via ‘Remote Configuration’, go to Network → NAT. It all looked correct for me, but I have seen people saying that re-entering the same details fixed the problem. So I disabled ‘Enable UPnP’ and saved, re-typed in the RTSP port of 554 and saved, then re-enabled ‘Enable UPnP’ and saved
I could then setup the camera in HomeAssistant and can access the feed via VLC (rtsp://admin:[PASSWORD]@192.168.XXX.XXX:554/Streaming/Channels/101)
is this the solution for what @williewalvis shared? i have a similar issue as @williewalvis , i see half screen with green mask, but 1/2 camera has the problem.
Has anyone come up with any solution to this 330007 error issue that’s now 20 months old?
It’s ridiculous too that EZVIZ doesn’t even appear to supply a list of their error codes. I can’t find them anywhere!
Ezviz Studio software. By making a modification to a *.ini file, you can enable advanced configuration when you restart the program.
Opening that configuration automatically enables RTSP without doing anything else.