Want to add the control data type of VRV air conditioner and support HomeAssistant
For example, the modes of VRV air conditioners include cooling, heating, air supply, dehumidification, automatic, etc.
The data type is: DTP6.0.10
Is it possible to send schema data type when
When DTP6.0.10=1, it is cooling
When DTP6.0.10=2, it is heating
When DTP6.0.10=3, it is supply air
When DTP6.0.10=4, it is dehumidification
Automatic when DTP6.0.10=5
Of course, what is the specific DTP6.0.10 value and what is the corresponding mode, which can be defined according to your own needs
The same wind speed is the same, and the data type used for the wind speed is also DTP6.0.10
Low speed when DTP6.0.10=1
Medium speed when DTP6.0.10=2
High speed when DTP6.0.10=3
Automatic when DTP6.0.10=4
Of course, what is the specific DTP6.0.10 value and what is the corresponding mode, which can be defined according to your own needs
This is more suitable for users who use VRV air conditioners at home. They can write it directly in the configuration file of HomeAssistant, and there is no need to do transfer on Node-Red.