Google Assistant: How to control HA form my phone's Google Assistant

Configuration
3

Thanks @Bob_NL , so there is no need to install any google assistant stuff on my HA device?

  • are ifttt webhooks that fast?
  • are there any guides that i could follow available (as i said im rather novice)
4

Nope, not necessary. I did not experience any delay longer than 5 seconds. Check this topic: How to Integrate Google Assistant and Home Assistant API using only IFTTT

5

Thanks again, will check it out and come back with questions, if any :slight_smile:

1 Like
6

The Google Assistant component will let you do that, you don’t have to use voice.

7

This is what I wanted to do yes. I wanted to link my Google Home Mini to the HA so I can control stuff with it.
The only problem I’m having when setting this up is that "https://HA_Installatino/google_assistant/auth is returning a 404 error so I can’t authenticate myself.

8

Lots of info this thread

1 Like
9

I think I have the same issue… I’m overwelmed with the information that is available.

Basically what I want it voice control/assistance of my Home Assistant Automation via my Google Home Mini’s.

I am running on HassIO.

Do I need to use DialogFlow (API.AI) or do I need to set up de Google Assistance App or …

1 Like
10

Google Assistant only.
The other are completely separate.

Follow instructions here and when complete it will just work. It looks daunting but much easier than it seems.

1 Like
11

hi tmjpugh,

thanks for you’re response.

Thus, if I understand correct, I can install the Google Assistance App in HassIO and ignore the setup of a Microphone and Speaker, correct?

Then follow the documentation under the link you provided, correct?

Thanks in advance,
Regards,
Dieter

12

No.
Follow instructions at link and done. Google Assistant will controller Compatible HA entity and can report state.

13

how can i install gactions on my rapsberry pi? :frowning:

14

Just place in the config folder. It is used for one time setup only I believe.
project.json goes in same folder

15

gonna point you to this thread as well. A lot of questions are answered here already and more people there to assist with specific OS/Config

1 Like
16

now the “chmod +x gactions” command does not do anything.
nor the command listed in the other tread “sudo chmod +x ./gactions”
:frowning:

17

chmod does not DO anything you will see.
It makes file executable on system so gactions program can run
if you dont get error, likely worked

type “ls -all”
should show file as -rwxr-xr-x or similar
x is executable ( i believe…always forget this but should be x’s)

18

Hi, I’ve run through the comprehensive setup for Google Assistant as outlined in the component documentation. Everything seemed to setup correctly without error. But when i ask the Google Home to ‘turn on the Kitchen light’ it just says that a kitchen light is not setup yet and to go to the Home app to configure. Everything seems fine within the app so I’m not sure how to progress troubleshooting whats wrong. Any suggestions?

19

Does the app show a light called “Kitchen Light” or any lights assigned to the “Kitchen” room?

20

Yeah, under the HASS device in Home Control it has identified the HASS light ‘Kitchen’ which i have assigned to room Kitchen. I have also assigned other HASS lights that were identified to their specific room with in the Google Home app.

21

Try “Turn on the kitchen lights” plural see if that does anything.

22

Yeah I tried that too, unfortunately it just says i haven’t configured any lights for that room. I also have a HASS controlled light in my Living Room which is also associated with the Living Room’ room entity under Home Control. It also doesn’t recognise “Turn on the Living Room light/s”.

Everything looks correct, i must just be saying it incorrectly. If i have a light called ‘Kitchen’ I would just say “Hey Google, turn on Kitchen light” or “Hey Google, turn on Kitchen”? I’ve tried both and neither work :frowning: