Can you check if http port is open? Maybe the command is different on yours… You need to check specifications if your doorbell supports isapi
@Klagio i edited my post with the command to open door, seems something went wrong with copy paste… You also need to send that XML too
Another person confirmed door open command…
I have Hik cameras, but block them from access to the Internet, and I dont use Hik-connect. If you are concious about security in any way, then you may want to do a little research on Hikvision before connecting an instance of Home Assistant to the Hik cloud.
That’s we want a local option, we don’t have to use Hikconnect all, all can be done with local commands, like mine example to open a door
But for now, for people with an Hikvision intercom , hikconect is the only way to answer a doorbell… Or another possibility is to setup a PBX Sip system, but quite an overkill for a doorbell
I am lost, which is the correct curl?
Dangerous?
Not dangerous at all , it’s all local…
But maybe your doorsystem doesn’t support isapi…
Have you checked if port 80 is open?
Guys, i changed thread here , with first reply, maybe we can discuss on that thread, then its all combined
first post is all about working commands, any feedback is appreciated, so i can update it
I already have how to set the call button in freepbx, kv8113-m.
yes, i tested freepbx too; i worked
but the disadvantage, on the inside intercoms/sip clients, there was no early video, so you dont see who is calling, untill you actually pickup
Hello, how to set the call button? Do you have a screenshot of the web interface? I want to refer to it.
for me on KV8102-IM also this command to open door not working.
curl: (7) Failed to connect to 192.168.xx.xx port 80: Connection refused
Any update for HikConnect integration?
Look here:
I can confirm this works on DS-KD8003-IME1
Any possibility to interact with the indoor stations instead of the outdoor? Outdoor is fine for villas but for appartments the indoor is mandatory i think.
Hi everyone, I created a Hik-Connect integration. Details, discussions, questions, bugs, etc. – please in the integration thread. Hope it helps someone!