Home assistant with Zigbee EM3588 USB stick

[Bai_Nguyencao]

Dear support member,

As the above title, I am trying to use my old Zigbee EM3588 Long range usb stick (model: ZM3588S-USB-LR) with Home assistant. Just take a look at “https://www.home-assistant.io/integrations/zha/”, we can see that the good way is the using of deCONZ add-on with ConBee USB stick.
However, is there anyway to use my old usb stick with Home assistant?

Thank you!

[Hedda]

@Bai_Nguyencao Did you have any luck getting your “Cortet” Zigbee radio by CEL working with ZHA?

If it has EmberZNet serial firmware then should work with ZHA if sellect “EZSP” and correct baud rate.

I have just posted a similar but more generic question about “Cortet” adapters in a other thread here:

ZHA and Cortet ZM3588S-USB or ZM357S-USB EM35x USB Sticks by CEL?

Anyone tested if these EM3588 / EM357 based radios are compatible with ZHA (EZSP) out-of-the-box? EM35x based USB dongles in the “Cortet” series by CEL (California Eastern Laboratories): CEL Cortet ZM3588S-USB (EM3588) CEL Cortet ZM357S-USB (EM357) Also, they have matching models come in LR (long-range) versions: CEL Cortet ZM3588S-USB-LR (EM3588) CEL Cortet ZM357S-USB-LR (EM357) If they don’t work out-of-the-box has anyone tried to flash them with newer Silabs EmberZNet firmware? They a…