Confirming what @Tuckie said.
Used the latest zwave config and the switch shows up as light. All led functions are available through the zwave page and led colors work. Have not tested but led colors could be changed by setting config parameter in automations. Infact the user guide from homeseer says this.
I have not multiple taps but I don’t see why they won’t work.
@e_jp Hi, for whatever reason scene automations are not working for me. I added the device specific configs.
Do you have any specific zwave config for this entity in zwave: (eg. refresh, polling_interval, etc.)?
nothing special, but you really need to stop HA before editing the xml file or this will not work.
Anyone else receiving different values for COMMAND_CLASS_CENTRAL_SCENE and have an updated chart?
2018-08-10 17:18:32.372 Info, Node007, Received Central Scene set from node 7: scene id=1 in 7740 seconds. Sending event notification.
2018-08-10 17:18:32.372 Detail, Node007, Refreshed Value: old value=7800, new value=7740, type=intyep, I noticed the same thing. Here’s the pattern my system gave me. I’m only using the double tap for an automation but it’s been consistent for a few weeks now.
Double 7860
Tripple 7920
quadruple 7980
quintuple 8040
Thanks @3ltreilly
I watched my logs and figured out:
press: 7800
hold: 7740
2x: 7860
3x: 7920
4x: 7980
5x: 8040
for scene_data, IDs are the same; top is 1, bottom 2
Did the same thing, even placed it in the same location you did. Everything still working the same as before.
I don’t see anything at all under HA Zwave “Config Options” for that WD-200’s node. I even rebooted HA.
Also not seeing anything to do with LEDs.
Do I have to remove and re-add the node?
UPDATE –
Yes. You have to remove and re-add. I can now see a long list of things under “config options”. YAY!
@Tuckie i’ve tried to use a newer open-zwave copy but it didn’t work, what i did was add the XML files to the existing homeseer folder, do i need to do something else?
UPDATE
I have it working with LEDs now too.
Here is the example automation that turns my LEDs (one switch for now) RED when security is armed, YELLOW when pending (exit time) and WHITE when disarmed.
- id: '123456789'
alias: Security State ON
trigger:
- entity_id: alarm_control_panel.home_alarm
platform: state
to: armed_home
- entity_id: alarm_control_panel.home_alarm
platform: state
to: armed_away
condition: []
action:
- data:
node_id: 13
parameter: 14
value: Red
service: zwave.set_config_parameter
- id: '123456789'
alias: Security State OFF
trigger:
- entity_id: alarm_control_panel.home_alarm
platform: state
to: disarmed
condition: []
action:
- data:
node_id: 13
parameter: 14
value: White
service: zwave.set_config_parameter
- id: '123456789'
alias: Security State PENDING
trigger:
- entity_id: alarm_control_panel.home_alarm
platform: state
to: pending
condition: []
action:
- data:
node_id: 13
parameter: 14
value: Yellow
service: zwave.set_config_parameterI still haven’t been able to get the multi-taps to work 
Anybody has this working successfully?
EDIT: Got the multitaps to work! Had to fix the scene_data as suggested by @marcusone.
On a separate note:
@iDVB I basically have similar automation with my security system. If you don’t mind, what security system do you have. I have Abode and I am not sure if “Pending” status is supported. By pending, I assume you mean when the exit/entry countdown is running.
I have another issue. May not be a HASS issue. Sometimes, the wall switch takes 2-3 physical presses to turn on light. It is almost as if the switch is sleeping and needs to be woken up before it works. When this is the case, automations do not work as well.
Anybody else face this issue? Never had such problems with the TP Link Wifi switch I was previously using.
My guess is that it doesn’t have a great connection into the Z-Wave network. Make sure your receiver isn’t impeded by a nearby wireless router and is close enough to the switch or other nodes in the network. FYI Z-Wave will hop through up to the four closest nodes.
@avp387 i had that issue due to position of the z-wave dongle. I had the machine in a rack system, had to use a short USB cable and place the z-wave dongle outside the rack.
Okay, I’m brand new to z-wave and have putzed around a bit with hassio to control some lights and temp/humidity sensors. I recently moved, so restarted with a fresh hassio setup and an Aeotec 5. I installed my first Homeseer WD200+, and it shows up as a dimmer. I can turn it on/off or set dimming levels (although I don’t get UI status reflection of state afterward).
Anyway, so I tried downloading openzwave as per above, but I guess I’m doing something wrong. If I point my config_path to the openzwave config directory and reboot my hassio, my Aeotec configuration gets completely deleted with a “Driver for controller /dev/ttyACM0 removed” message in my logs…
Help? Thanks.
It looks like everything’s there, actually, without the downloaded openzwave, accessible by code. I guess I was just expecting to see widgets in the UI for everything.
openzwave can sometime add support, sometimes just names things correctly. open another thread with your configuration your having issues with and I’m sure someone will help out.
OK, for me adding the config_path option just confused my zwave config and it forgot about everything. Including the Aeon Gen5 USB stick. So that suggestion is missing a ton of details on moving and maintaining any existing configuration you already have.
After removing the the config_path and reverting all the changes I made trying to follow that thread of “advice” I started over.
For me, what did the trick was after adding the WD200+ dimmer (using “ADD SECURE NODE”) was to click on “HEAL NETWORK” (as suggested by https://www.home-assistant.io/docs/z-wave/adding/#adding-secure-devices) then I clicked “SAVE CONFIG” (that wrote the WD200+ config details to my xwcfg_HEXID.xml file). After that all the WD200+ options showed up in the Node Config Options for that device.
This is on HA 0.91.3
Good luck!
How are you guys handling status mode with these?
If I set one or two led lights to on, the switch must be set into status mode to see the leds, but turning the leds off does not set the switch back to normal mode automatically, like it does on a homeseer system. There also doesn’t appear to be any way in HA to read a config parameters for me to verify both leds are turned off before setting it into normal mode.
How can I coordinate the mode with active notification LEDs? (normal mode when all leds are off, status mode when any led is on)
I’m trying to set up the multi-tap triggers on a HomeSeer FC-200+ fan controller. I’d like to automatically set the fan to high on double tap up.
I can see that the scene is activated in the ZWave logs, but it’s not triggering. Any ideas?
Here’s my automation:
- id: 'turn_on_master_bedroom_fan_double_tap_up'
alias: Turn on master bedroom fan to high with double tap up
initial_state: 'true'
trigger:
- platform: event
event_type: zwave.scene_activated
event_data:
entity_id: fan.master_bedroom
scene_id: 1
scene_data: 7860
action:
- service: fan.turn_on
data:
entity_id: fan.master_bedroom
- service: fan.set_speed
data:
entity_id: fan.master_bedroom
speed: high
Wrong entity id for the trigger. It should be a zwave entity.