I have updated firmware on a RPI 4 and added HA on the SSD. When I plug in the power nothing happens? Updated firmware (confirmed that it boots from ssd / usb when addin Raspberry Pi OS on the ssd , it works) Downloaded HA, extract it and use etcher to flash to the SSD Putting Rpi with network cab…

When using usb 2.0 port it worked :confused:

I had the same problem until I found this link installed Build 5.1 then the PI boots from SSD in USB3. [image] Release Development 5 build 1 · home-assistant/operating-system Changes Fix RPi4 with buildroot v2020.02.4 (#815) @pvizeli Release 5.1 (#814) @pvizeli Add support for USB wifi (…

Just a update!! This is buggy I have no understanding why but HA kept loosing my MQTT switch and light states so I went back to my old constantly updated All In One Installation which is working great. Sorry if I mislead anyone!!

You need a RPI4 with newest firmware and home assistant OS 5.x this works reliably with usb3.0 See my post here [image] HassOS on SSD Installation Since August 2020 it is possible to directly boot your ssd attached via usb on a RPI4 without a SD card. Finally a firmware U…

Thank You for your reply. Just to clarify I am not having issues with booting from a USB 3 port on my Raspberry PI 4 with the HASSIO OS install. I believe the problem I am having is moving my current *.YAML configuration files from my old original All-In-One-Installation to HASSIO. I have continu…

[image] dhaker: in anticipation of the upcoming deprecation of the Home Assistant Core Method. Core is not being Deprecated. You are incorrect. [image] dhaker: Raspberry PI 4 with the HASSIO OS install [image] dhaker: All-In-One-Installation to HASSIO Hass.io was renamed some t…

[image] dhaker: ARROGANT JERK !! How lovely of you, thanks for sharing. You have tried to use a Dev build and found it buggy, then blamed your config, used an incorrect name for a HA installation method, then made an incorrect statement about an installation method being deprecated. Perhaps…

Sorry about the Jerk statement that was wrong, but felt a bit put off by your correction of my HASSiO correction to Hass.io , sorry I missed the period also I never said the installation method would be depreciated, I said it was MY ANTISCIPATION of the upcoming depreciation !! I will try to move …

[image] dhaker: Sorry about the Jerk statement that was wrong Not a worry, I found it amusing more than anything. [image] dhaker: your correction of my HASSiO correction to Hass.io , sorry I missed the period I will try to move my All in one installation to HASS.IO sometime in the future …

OK looks like we are back on a civil communication level, sorry I miss understood, that seems to be all of us in the US are having a issue with civility!! Back to one of my issues moving to to hass.io on my current system is my Raspberry PI system with a camera which worked with my current working …