Integrating Eectrolux Pure I9 Robotic Vacuum

pet · April 28, 2021, 12:03pm

My issue was caused by current Electrolux app (Wellbeing) and distribution of localpw from pureI to Electrolux cloud, see: Unable to connect local vacuum because there is no localpw · Issue #6 · Phype/purei9_unofficial · GitHub

fastender · May 16, 2021, 9:00am

A little nicer with Template Vacuum - Home Assistant and ssh add-on with script hassio.addon_stdin over:

vacuum_start:
  alias: start_vacuum
  sequence:
  - service: hassio.addon_stdin
    data:
      addon: a0d7b954_ssh
      input: python3 -m purei9_unofficial cloud -c USERNAME:PASSWORD home
        -r IDHERE
  mode: single
vacuum_home:
  alias: home_vacuum
  sequence:
  - service: hassio.addon_stdin
    data:
      addon: a0d7b954_ssh
      input: python3 -m purei9_unofficial cloud -c USERNAME:PASSWORD home
        -r IDHERE
  mode: single
pause_vacuum:
  alias: pause_vacuum
  sequence:
  - service: hassio.addon_stdin
    data:
      addon: a0d7b954_ssh
      input: python3 -m purei9_unofficial cloud -c USERNAME:PASSWORD home
        -r IDHERE
  mode: single

and

vacuum:
  - platform: template
    vacuums:
      staubi:
        start:
          - service: script.turn_on
            target:
              entity_id: script.vacuum_start

        return_to_base:
          - service: script.turn_on
            target:
              entity_id: script.vacuum_home

        pause:
          - service: script.turn_on
            target:
              entity_id: script.vacuum_pause

DrGreenbaum · August 18, 2021, 6:04am

Hi!

I think I need a for dummies guide here on how to implement this. I got both these two components installed in my custom_components folder now so i can do it either way. Can somebody help me get going with this?

With the electrolux_purei9 folder in custom_components i get platform not found error?

DrGreenbaum · August 18, 2021, 6:26am

Ok got Limeray’s component working by adding it as a custom repo in HACS and following the guide. Seems to be working good enough for now

DjJoakim · August 18, 2021, 3:10pm

Hey! I am trying the same thing but feels like i am really stuck… could you help me out how you did?

edit: Got it working now! Thanks anyways. Seems to be working fine
Does anyone know if it’s possible to control zones? Or is it only possible to make it “start” and “stop” ?

DrGreenbaum · August 18, 2021, 8:29pm

I added this adress as as a custom repository in HACS: https://github.com/anhaehne/homeassistant_electrolux_purei9.git

After that i could follow the instructions here. For now it works but i can see if it is possible to add some more functionality to the vacuum.

nikl.ekman · August 29, 2021, 2:52pm

Thanks for your hard work @Limeray but I did not get the integration to work. Apparently, there’s an issue with a local password not being set on the robots which is a required ingredient for getting a local integration to work.

Instead, I created my own Pure i9 integration using the same library but using only cloud commands (as opposed to local). Using a cloud integration might not be ideal but it works for me. I hope this can help other people as well:

pet · August 30, 2021, 7:57am

Thank you @nikl.ekman! Installed your version and seems to be working.

mapeje · August 30, 2021, 7:21pm

Installed and working great! Big thanks!

Limeray · September 5, 2021, 1:18pm

Great work. I’ve linked you repository in my original awnser and my repository.

Emvees_FFS · November 24, 2021, 1:46pm

Coolt, tyvärr är jag sjukligt ny på detta, har du någon for dummies guide? Måste jag ha HA cloud?
Skulle vara schysst att få in den , har en 9.2

mvh
steven

pet · November 24, 2021, 2:52pm

Not sure if I got the gist of the question as my Swedish isn’t that fluent.
I have my HASS running on RasPi (the HASS OS distribution) at the moment on version 10.7

Install HACS https://hacs.xyz/docs/configuration/basic
Open HACS from HASS UI, go to Integrations and search for Pure i9
Install Pure i9
Configure

Emvees_FFS · November 24, 2021, 4:12pm

Thanks Petri
Will try that in a while, will keep you posted on how´s it going .

It wont show up

pet · November 25, 2021, 6:34am

@Emvees_FFS what is ‘It’? i.e. which step fails?
And if it is HACS and I wasn’t clear enough, of course HACS setup needs to be done

Emvees_FFS · November 25, 2021, 3:05pm

Yes i have hacs i got it in but it seems abit simple, dunno if im doing it wrong thou.

nikl.ekman · November 28, 2021, 2:57pm

It’s not a “default” integration in HACS. You need to add https://github.com/Ekman/home-assistant-pure-i9 as a custom repository in HACS.

Emvees_FFS · November 29, 2021, 10:26am

Ja jag har fått in din addon, men jag är sjukt ny på det här. En fråga Niklas, kan man se status för tex behållare full? Går det att integrera planlösningen i huset på något vis med? tänkte från Wellbeing appen. Tusen tack för du tog dig tid att svara.

/Steven

Rikkie80 · December 12, 2021, 9:14am

Hi,

Does anyone know if the same principles for this integration can be used for AEG / Electrolux washing machines and dryers?

feature request

pet · December 21, 2021, 1:47pm

@Emvees_FFS the dustbin status is in at least in the latest releases:

Emvees_FFS · January 12, 2022, 1:34pm

This is wierd, i had to reinstall everything and now i cant seem to intergrate the Pure i9.
I followed every step but it wont show up as an entity.
I´m on Home Assistant 2021.12.9.
I added the vaccum yaml stuff and enter my credentials there.

restarted everything

wierd any suggestions?

vacuum:
  - platform: purei9
    email: my login
    password: my psw