Really glad with the update of 0.92 !! Thanks for the great support 
1 Like
Would anyone be interested in testing this: https://pypi.org/project/incomfort-client/?
It can form the basis for getting official HA support for InComfort / Intouch.
Unfortunately, I have no room thermostats, so could use some testers. Neither can I test authentication for the newer gateways.
It includes a basic CLI that can be used to read parameters:
python intouchclient/__init__.py ${HOSTNAME}
… and set an override temperature:
python intouchclient/__init__.py ${HOSTNAME} --temp 20
Bring it on 
I think I have all the components, just very new to hass, so need some help in getting this runnign I guess if that’s ok.
I would love, but where to place te files ? Because still will not be a custom component 
Yea, sorry you had to wait 2 years!
A basic question (I believe) I have intouch APP installed which gives me access to my Intergas boiler with RF however I get an “unathorized” error and believe that there must be a different login (presumably set up by the engineer installer) that does not allow me DIRECT access to the boiler, could this be the case?
Thanks
TL;DR Yes (I use InTouch service); you need an account with an InterGas server.
I think you mean via WiFi and not RF? Only because I doubt your phone supports RF. Thus, the login would be for a vendor’s RESTful API (i.e one of their servers).
[Boiler] --RF–> [Lan2RF] --Internet–> [vendor’s servers] --Internet–> [your phone]
It may be helpful provide a link to the specific app (there are 3 that I know of) on whichever of the app stores you use…
One day, I may try to provide access directly to the vendor’s RESTful API, or even get at the RF directly…
I’m sorry for my confusion, the boiler is an ECO RF 36 (thats where the RF confusion came from). The app is In Touch. And yes it is connected via the internet, the boiler has a local IP.
I ideally want to get an alert if the boiler goes down (electricity fails) as its on a circuit that includes outdoor lighting that occasionally trips during bad weather. Appreciate your help/advice.
Anyone help on this ?
HI - I wrote the PyPi library, and the HA integration. The Intergas gateway comes in two firmware versions, one that requires credentials (username / password), and one not. Mine does not, but I know others who do have credentials have had it working OK.
It is all here: Intergas InComfort/Intouch Lan2RF gateway - Home Assistant
I beleive there is a default username, password, but I don’t know what they are, maybe:
- username: admin
- password: intergas
Does that answer your question?
Thank you for response. The problem seems to be user/password. I’m not sure if this may be unique to the installer and I effectively only get end user access. I’ve tried all combinations, default, the one I use in the app, the password on the back of the gateway (with variety of usernames).
If I type the IP address in I get to the splash screen
But anywhere beyond that requires user/pass.
I’ve dropped Intergas a mail and await response.
I have ordered the RF NanoCul and am hoping to.add the RF at some point (perhaps when it’s a little more stable), hopefully this wont create a further issue.
Appreciate advice.
What happens when you click on heaters? Does it ask for you to login then?
I get this on all but the overview
Including Heaters
yep - you need the username/password: then everything should work - let me know what they are.
Username: admin, password: intergas 
Thanks for help. I found that on the Domoticz board but unfortunately that doesn’t work. Could it be the installer has the username/password. As there seems to be an installer and an end user policy with Intergas?