Hello, i am working on a similar project where i’m attempting to get MEATER temperatures sent to a Raspberry Pi via Python, and using those values as triggers. May I ask what software you are using to code this?
This is all default yaml code of Home Assistant
Just got some of this working with Node-RED dashboard. Thank you!
The only problems I’m having are:
Elapsed time always shows “Less than a minute” - both on Lovelace and Node-RED
Updated shows “Unavailable”
Well, I was searching for a way to connect a Meater block to a temperature controller.
Any idea how I should do that?
With a short google search I saw that it might be possible to achieve this with HA.
I didn’t buy anything yet, but I was thinking about a flameboss or a Smobot. Maybe even a combination of the two.
I also wondered if I could use a BBQ Dragon Chimny fan instead as I can use that for multiple purchases.
Hi There,
First of all: Nice integration of the meater!!
I’m a bit of a noob. I have my token and placed it in my secrets.
I copied the parts of @PeterFleur and teh part of @afishe2000 in my configuration.yaml :
# Meater
meater:
- platform: rest
name: meater
json_attributes:
- data
resource: https://public-api.cloud.meater.com/v1/devices/
headers:
Authorization: !secret meater
value_template: "OK"
- platform: template
sensors:
internal_temperature_1_f:
unit_of_measurement: '°F'
friendly_name: "Meat Temperature"
icon_template: mdi:food-steak
value_template: "{{ '%.1f' | format(states('sensor.internal_temperature_1') | float * (9/5) + 32) }}"
ambient_temperature_1_f:
unit_of_measurement: '°F'
friendly_name: "Grill Temperature"
value_template: "{{ '%.1f' | format(states('sensor.ambient_temperature_1') | float * (9/5) + 32) }}"
icon_template: mdi:grill
cook_temperature_target_1_f:
unit_of_measurement: '°F'
friendly_name: "Target Temperature"
value_template: "{{ '%.1f' | format(states('sensor.cook_temperature_target_1') | float * (9/5) + 32) }}"
icon_template: mdi:thermometer-lines
cook_temperature_peak_1_f:
unit_of_measurement: '°F'
friendly_name: "Peak Temperature"
value_template: "{{ '%.1f' | format(states('sensor.cook_temperature_peak_1') | float * (9/5) + 32) }}"
icon_template: mdi:thermometer-lines
cook_time_elapsed_1_formatted:
friendly_name: "Elapsed Time"
icon_template: mdi:timer-sand
value_template: >-
{% set time = (states('sensor.cook_time_elapsed_1') | int * 100) | int %}
{% set minutes = ((time % 360000) / 6000) | int %}
{% set hours = ((time % 8640000) / 360000) | int %}
{% set days = (time / 8640000) | int %}
{%- if time < 6000 -%}
Less than a minute
{%- else -%}
{%- if days > 0 -%}
{{ days }}d
{%- endif -%}
{%- if hours > 0 -%}
{%- if days > 0 -%}
{{ ' ' }}
{%- endif -%}
{{ hours }}h
{%- endif -%}
{%- if minutes > 0 -%}
{%- if days > 0 or hours > 0 -%}
{{ ' ' }}
{%- endif -%}
{{ minutes }}m
{%- endif -%}
{%- endif -%}
cook_time_remaining_1_formatted:
friendly_name: "Remaining Time"
icon_template: mdi:timer-sand
value_template: >-
{% set time = (states('sensor.cook_time_remaining_1') | int * 100) | int %}
{% set minutes = ((time % 360000) / 6000) | int %}
{% set hours = ((time % 8640000) / 360000) | int %}
{% set days = (time / 8640000) | int %}
{%- if time < 6000 -%}
Unknown
{%- else -%}
{%- if days > 0 -%}
{{ days }}d
{%- endif -%}
{%- if hours > 0 -%}
{%- if days > 0 -%}
{{ ' ' }}
{%- endif -%}
{{ hours }}h
{%- endif -%}
{%- if minutes > 0 -%}
{%- if days > 0 or hours > 0 -%}
{{ ' ' }}
{%- endif -%}
{{ minutes }}m
{%- endif -%}
{%- endif -%}
updated_at_1_formatted:
friendly_name: "Last Updated"
value_template: "{{ states.sensor.updated_at_1.state | int | timestamp_custom('%-I:%M %p')}}"
icon_template: mdi:update
When I restart Hass I get the folowing error.
The system cannot restart because the configuration is not valid: Component error: meater - Integration ‘meater’ not found.
Probably i do something very stupid. please help me.
Thanks!
ok, i think i figured it out. I will post the to do steps for other noobs like me:
-
make sure that you have a custum integration of the Sotolotls meater component:
Meater thermometer - #124 by rodak -
copy the files to the /config/custum_components as described
-
Change the manisfest file if you have version 2021.6 or higher of ha as described here:
Meater thermometer - #162 by brg468 -
Restart a couple of times, that is what I read multiple times
-
Go to integration and add the meater integration, it will be in the list of possible integrations and configure it with your cloud credentials.
No erros anymore so I hope this works
UPDATE: yes it works, but only with internal and external temp. seems like not all the options are available this way
2 Likes
More options will come once the integration is official, they want to keep the PR as small as possible to get it merged. Then add functionality.
ok. thanks, hope it will be officially added soon
Any news on the integration?
I’m also wondering if there’s any news on an official integration
It doesn’t seem like the author is making updates to the PR anymore…
Isn’t it pending review from HA right now?
It was reviewed back in July but none of the requested changes seem to have been made. The last changes made were 4 months ago.
1 Like
Thanks for your work on this! I just put it into my setup.
Very interested in how this works as far as lamens term and I have the meater+. Will it work with that?
someone give instructions on how to install this? I am fairly new at this home assistant and not sure how to follow the MEATER Cloud REST API raspatory. I been able to install UI stuff but I think this isnt in the UI yet. I assume I have to install it in a card manually?
It should be included in HA 2022.5
1 Like
ill take a look again. thanks!
I have Home Assistant 2022.4.7, says its up to date, is there a beta to download?
2022.5 will be the May release. Can’t remember exactly when in the month it comes out but I think the first week or so.
I don’t see the beta out yet either. Not sure the timeline on that.