Model: SIRIUS-12E IU
Midea Mission MB09N8D6 (EU Market) works nice with the component.
Manufacturer: Royal Clima
Model: Triumph Inverter
Model ID: RCI-TM09HN
I can confirm the following unit also works:
Model: Mission Pro
Model ID: MSMBAU-09HRFN8
I also had two 2021 units installed this week. Will confirm later if these work as well once I receive the dongles for those.
I raised an issue on the repo of reneklootwijk to reflect this as well
Model ID: SVI32-09WFI
Had to upload the sketch, delete the esphome yaml and add it again to work. If I didn’t, it wouldn’t get a response. With a d1 mini, logic converter and uart on pins 4&5(D1&D2)
Sorry this is not tested. Please delete it from the list
I can confirm my 2021 models work as well. Same Model ID
Model: Forest DC AF-12N1C2-I
As you were kind enough to provide links to the manufacturer websites, I took the liberty and changed your first entry from “Idea” to “Midea”. Just as FYI in case you want to change it in your post as well.
Thanks for reporting!
yes, made missprint. thanks for point out, corrected in my post.
Confirmed Working with Ariston’s Wifi dongle.
I have to ask, what is “Aristons WIfi dongle”? Is that a manufacturer dongle running the ESPHome firmware?
No it’s the manifacturer dongle running its own firmware, working with Mac-Zhou integration. If this list was only for the ESP, then I’m sorry, I misunderstood and I’ll delete my posts
Not a problem at all. Yes, this list is only for the ESPHome
custom_component to run without a manufacturer dongle (= own ESP board).
We just wanted to show, how many A/Cs are usable without a manufacturer dongle, to make it easier for people to select an A/C that is usable with HA before buying.
PS: Just leave your posts, doesn’t matter, I’ll just take your device off the list and all is good.
in case you still search for a way to control toshiba devices - this may have you covered: GitHub - h4de5/home-assistant-toshiba_ac: Toshiba AC integration into home-assistant.io