Midea A/C and ESPHome component - list of all known working models and manufacturers

Brand: Mitsui
Model: MTXD12HP24
Year: 2020
Market: EU

1 Like

Confirmed:
Manufactured: Inventor
Model: Supreme
Year: 2021(?)
Market: EU
Model ID: SVI32-09WFI

Had to upload the sketch, delete the esphome yaml and add it again to work. If I didn’t, it wouldn’t get a response. With a d1 mini, logic converter and uart on pins 4&5(D1&D2)

1 Like

Sorry this is not tested. Please delete it from the list

1 Like

Confirmed:

Brand: Kaisai
Model: Fly
Year: 2021
Market: EU
ID: KWX-12HRBI

1 Like

I can confirm my 2021 models work as well. Same Model ID

1 Like

Manufacturer: Midea
Model: MSAFA-09HRN1
Year: 2020
Market: UA
Link

Manufacturer: Idea
Model: ISR-12HR-MA0-DN1
Year: 2020
Market: UA
Link

Manufacturer: Midea
Model: Forest DC AF-12N1C2-I
Year: 2019
Market: UA
Link

Manufacturer: Neoclima
Model: NS/NU-07AHEw
Year: 2019
Market: UA
Link

Manufacturer: Neoclima
Model: NS/NU-09AHEw
Year: 2019
Market: UA
Link

1 Like

As you were kind enough to provide links to the manufacturer websites, I took the liberty and changed your first entry from “Idea” to “Midea”. Just as FYI in case you want to change it in your post as well. :slight_smile:

Thanks for reporting! :slight_smile:

yes, made missprint. thanks for point out, corrected in my post.

1 Like

Manufacturer: Galactic
Model: GKZ09HM-S
Year: 2020
Market: UA
Link

1 Like

Manufacturer: Qzen
Model: ZE-12WSE
Year: 2020
Market: HR

1 Like

Manifacturer: Ariston
Model: Nevis
Year: 2019
Market: IT

Confirmed Working with Ariston’s Wifi dongle.

1 Like

I have to ask, what is “Aristons WIfi dongle”? Is that a manufacturer dongle running the ESPHome firmware?

No it’s the manifacturer dongle running its own firmware, working with Mac-Zhou integration. If this list was only for the ESP, then I’m sorry, I misunderstood and I’ll delete my posts

Not a problem at all. :slight_smile: Yes, this list is only for the ESPHome custom_component to run without a manufacturer dongle (= own ESP board).

We just wanted to show, how many A/Cs are usable without a manufacturer dongle, to make it easier for people to select an A/C that is usable with HA before buying. :slight_smile:

PS: Just leave your posts, doesn’t matter, I’ll just take your device off the list and all is good. :slight_smile:

in case you still search for a way to control toshiba devices - this may have you covered: GitHub - h4de5/home-assistant-toshiba_ac: Toshiba AC integration into home-assistant.io

1 Like

Manufacturer: Olmo
Model: OSH-12FR9
Year: 2021
Market: UA
Link

Manufacturer: Royal Clima
Model: RCI-TN29HN
Year: 2021
Market: RU
Link

Could you give a little more information on how you did this? I have a MrCool and it has the weird USB connector. I purchased a dongle from @sergge but I think I need to create something similar to yours. Where did you get the USB connector from? Did you have to modify it?

Did you check this thread?

We all started there, me including, some more info provided there. If you need something more, please reply in there, we can shed more light on it.

Thanks, I did check that thread and posted in there, I’m still not sure what options I have. I’m not that technical with soldering and all that, I also don’t want to mess the unit up, so I’m looking for a solution which I can add the dongle without affecting the MrCool unit.