Hello
I recently bought a Moes BRT-100 TVR to test it out before buying them for the rest of the house. However I have tried to pair in Home Assistant with deconz in the phoscon app but have been unsuccessful.
Has anyone had an luck in pairing?
I’m using a Conbee 2 usb stick for my zigbee network.
Any help would be appreciated
Mark
JSTK
November 6, 2021, 10:40am
2
There is an open device request here:
opened 09:53AM - 22 Jul 21 UTC
Device Request
<!--
- Before requesting a device, please make sure to search the open and cl… osed issues for any requests in the past.
- Make sure not to remove any headers and fill the template completely. If you remove the headers, the issue will be auto-closed.
- Sometimes devices have been requested before but are not implemented yet due to various reasons.
- If there are no hits for your device, please proceed.
- If you're unsure whether device support was already requested, please ask for advise in our Discord chat: https://discord.gg/QFhTxqN
-->
## Device
- Product name: MoesGo SMART Thermostat BRT-100 Radiator Thermostat (TRV)
- Manufacturer: Tuya. (Moeshouse.com)
- Model identifier: As per deCONZ GUI Basic cluster.
- Device type : - Thermostat
<!--
Please refer to https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Request-Device-Support
on how the Basic Cluster attributes are obtained.
-->
## Screenshots
https://zigbee.blakadder.com/Beca_BRT-100.html
https://www.amazon.de/-/en/Thermostat-Operated-Radiator-Regulator-Compatible/dp/B0972YM58R/ref=sr_1_5?dchild=1&keywords=heizk%C3%B6rperthermostat+moesgo&qid=1626946864&sr=8-5
<!--
Screenshots help to identify the device and its capabilities. Please refer to:
https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Request-Device-Support
for examples of the required screenshots.
Required screenshots:
- Endpoints and clusters of the node
- Node Info panel
In the Cluster Info panel press "read" button to retreive the values. Please note that at least "Manufacturer Name" and "Model Identifier" must be populated with data (therefore, must not be empty), otherwise that information will not be usable. For battery powered devices, after pressing read it is required to wake-up the device by pressing a button or any other means of interaction.
-->
<!--
If available add screenshots of other clusters. Please Remove sections that are not available on your device.
Relevant clusters are: Simple Metering, Electrical Measurement, Power Configuration, Thermostat, etc. You can typically spare Identify, Alarms, Device Temperature, On/Off. Please ensure data has been read prior to taking any screenshots.
-->
### Basic
### Identify
### Alarms
### Device Temperature
### Groups
### Scenes
### On/Off
### Level Control
### Color Control
### Simple Metering
### Diagnostics
### Other clusters that are not mentioned above
I have the same device, but unable to control from HA yet.
colinnic
November 14, 2021, 1:37pm
3
Not sure this helps you but I have connected to the BRT-100 TRV using a Conbee 2 via Zigbee2MQTT.
I had initially connect the Conbee 2 to deConz and everything seemed OK.
I can now see the TRV in home assistant (via MQTT). It all seems to be working. Zigbee2MQTT picked up the device instantly.
If you need any additional info I’m happy to help if I can.
I just posted same sort of issue, slightly differnt setup, but i am also unable to actaully control it.
I have just purchased a Moes BRT-100 Zigbee trv, which I have connected to my hacked Silvercrest (Lidl) Smart Home Gateway, Zigbee2MQTT and Home Assistant. I use the same GW with multiple other smart devices with no issues, Xiaomi motion sensors, temperature sevnsors, light switches, etc. But the Moes BRT-100 trv doesnt seem to want to accept any controls from HA. It’s all added in Zigbee2MQTT fine, with interview completed, etc, and I can see all the controls, but I can’t seem to affect any con…