Smart thermostat valve no sensor or controls

Configuration Zigbee
#1

Added a zigbee smart thermostat valve to home assistant (11th zigbee device in my HA setup). Use an TI zigbee USB stick (texas_instruments_cc2531).
The box/manual says type is ME167. Got it paired trough the zha add device interface but looks like not all features are recognized. Can’t see or set temperature.

Device info
TS0601
by _TZE200_bvu2wnxz
Connected via Zigbee usb stick
Zigbee info
IEEE: 00:3c:84:ff:fe:da:34:8d
Nwk: 0x2eda
Device Type: EndDevice
LQI: Unknown
RSSI: Unknown
Last Seen: 2022-11-19T11:19:20
Power Source: Battery or Unknow

tried “reconfigure” and “remove/add” but result stays the same. Anyone with similar issues and tips how to debug/fix?

1 Like
#2

I paired the same device and the result is the same.
Do you have a solution?

#3

Post devices support request to https://github.com/zigpy/zha-device-handlers/issues

Reason why → https://www.home-assistant.io/integrations/zha#zha-exception-and-deviation-handling

Regardless buy a newer Zigbee Coordinator adapter and flash the latest firmware on then migrate to it as the CC253x series (CC2530 and CC2531) are obsolete and got very old unmaintained firmware:

1 Like