Ok i tested on zigbee2mqtt with my dongle USB and it WORK wow , after connecting i clic single , double , long press and zigbee2mqtt Fund de code. So my switch is not broken.
Try to continue to research solution for ZHA. Thank
1 Like
So here is the way I have found to have all my devices in HA for now, I am using the sonoff dongle key, for the 4 switches and the BASICZBR3 To try to extend the network with zigbee2mqtt.
And I use the zonoff zigbee bridge with tasmota for all the rest of the devices since its signal is strong And device setup is easy.
so i have 2 network , i think is not the best way to do it but …
Weird thing that happened, I have a TH-01 which is broken on my desk the switch to activate the network search is broken but the battery was still inside. with Zha I had tried to activate it by removing and re-inserting the battery sometimes and without success, but when I installed zigbee2mqtt it was detected automatically, I am very happy.
@jimford
I also had the problem sometimes when trying with zigbee2mqtt here is how I succeeded with the four switches.
Remove device in mqtt.
Remove the battery.
Restart the ad-on zigbee2mqtt.
Replace the battery. And activate the pairing mode
it work for me , took me sometimes three or four times before I got the button as well as the signal, the battery still extends present.
I also have the same issue with the wi-fi switches SNZB-01. Other devices - the temp and humidity sensor TH-01, and the motion sensor SNZB-03 are working fine.
I have a tasmota based sonoff zigbee bridge. Running Hassio V4.12
Here is a part of the logfile. Somehow it seems the SNZB-01 just does not install properly.
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x42d4:1:0x0000] Attribute id: 4 value: eWeLink
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x42d4:1:0x0000] Attribute id: 5 value: TH01
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x3846:1:0x0000] Attribute id: 4 value: eWeLink
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x3846:1:0x0000] Attribute id: 5 value: MS01
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x94ee:1:0x0000] Attribute id: 4 value: eWeLink
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x94ee:1:0x0000] Attribute id: 5 value: TH01
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0xbef7:1:0x0000] Attribute id: 4 value: eWeLink
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0xbef7:1:0x0000] Attribute id: 5 value: WB01
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Checking quirks for None None (60:a4:23:ff:fe:1d:bc:bf)
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'bellows.zigbee.application.EZSPCoordinator'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Found custom device replacement for 60:a4:23:ff:fe:1d:bc:bf: <class 'bellows.zigbee.application.EZSPCoordinator'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Checking quirks for eWeLink TH01 (00:12:4b:00:1f:84:1e:4d)
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'bellows.zigbee.application.EZSPCoordinator'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.gledopto.soposhgu10.SoposhGU10'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {11, 13} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.lutron.lzl4bwhl01remote.LutronLZL4BWHL01Remote2'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because profile_id mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.netvox.z308e3ed.Z308E3ED'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.osram.a19twhite.A19TunableWhite'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {3} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rom001.PhilipsROM001'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rwl020.PhilipsRWL020'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {1, 2} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rwl021.PhilipsRWL021'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {1, 2} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.multi.SmartthingsMultiPurposeSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.tag_v4.SmartThingsTagV4'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee3_io.XBee3Sensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee_io.XBeeSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xiaomi.mija.smoke.MijiaHoneywellSmokeDetectorSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Checking quirks for eWeLink MS01 (00:12:4b:00:1f:90:cd:e4)
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'bellows.zigbee.application.EZSPCoordinator'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.gledopto.soposhgu10.SoposhGU10'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {11, 13} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.lutron.lzl4bwhl01remote.LutronLZL4BWHL01Remote2'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because profile_id mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.netvox.z308e3ed.Z308E3ED'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because input cluster mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.osram.a19twhite.A19TunableWhite'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {3} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rom001.PhilipsROM001'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rwl020.PhilipsRWL020'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {1, 2} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rwl021.PhilipsRWL021'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {1, 2} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.multi.SmartthingsMultiPurposeSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because input cluster mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.tag_v4.SmartThingsTagV4'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee3_io.XBee3Sensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee_io.XBeeSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xiaomi.mija.smoke.MijiaHoneywellSmokeDetectorSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because input cluster mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Checking quirks for eWeLink TH01 (00:12:4b:00:1f:84:e0:96)
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'bellows.zigbee.application.EZSPCoordinator'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.gledopto.soposhgu10.SoposhGU10'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {11, 13} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.lutron.lzl4bwhl01remote.LutronLZL4BWHL01Remote2'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because profile_id mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.netvox.z308e3ed.Z308E3ED'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.osram.a19twhite.A19TunableWhite'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {3} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rom001.PhilipsROM001'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rwl020.PhilipsRWL020'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {1, 2} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rwl021.PhilipsRWL021'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {1, 2} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.multi.SmartthingsMultiPurposeSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.tag_v4.SmartThingsTagV4'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee3_io.XBee3Sensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee_io.XBeeSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xiaomi.mija.smoke.MijiaHoneywellSmokeDetectorSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Checking quirks for eWeLink WB01 (00:12:4b:00:1f:91:56:88)
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'bellows.zigbee.application.EZSPCoordinator'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.gledopto.soposhgu10.SoposhGU10'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {11, 13} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.lutron.lzl4bwhl01remote.LutronLZL4BWHL01Remote2'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because profile_id mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.netvox.z308e3ed.Z308E3ED'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.osram.a19twhite.A19TunableWhite'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {3} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rom001.PhilipsROM001'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rwl020.PhilipsRWL020'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {1, 2} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.philips.rwl021.PhilipsRWL021'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {1, 2} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.multi.SmartthingsMultiPurposeSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.tag_v4.SmartThingsTagV4'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee3_io.XBee3Sensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee_io.XBeeSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1}
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xiaomi.mija.smoke.MijiaHoneywellSmokeDetectorSensor'>
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x42d4:1:0x0000] Attribute id: 4 value: eWeLink
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x42d4:1:0x0000] Attribute id: 5 value: TH01
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x42d4:1:0x0000] Attribute id: 7 value: 3
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x3846:1:0x0000] Attribute id: 4 value: eWeLink
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x3846:1:0x0000] Attribute id: 5 value: MS01
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x3846:1:0x0500] Attribute id: 1 value: 13
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x3846:1:0x0500] Attribute id: 2 value: 1
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x3846:1:0x0500] Attribute id: 0 value: 0
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x3846:1:0x0000] Attribute id: 7 value: 3
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x42d4:1:0x0001] Attribute id: 32 value: 32
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x42d4:1:0x0001] Attribute id: 33 value: 200
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x94ee:1:0x0000] Attribute id: 4 value: eWeLink
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x94ee:1:0x0000] Attribute id: 5 value: TH01
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x94ee:1:0x0000] Attribute id: 7 value: 3
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x94ee:1:0x0001] Attribute id: 32 value: 32
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x94ee:1:0x0001] Attribute id: 33 value: 200
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x3846:1:0x0001] Attribute id: 32 value: 32
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x3846:1:0x0001] Attribute id: 33 value: 200
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x42d4:1:0x0402] Attribute id: 0 value: 2033
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0xbef7:1:0x0000] Attribute id: 4 value: eWeLink
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0xbef7:1:0x0000] Attribute id: 5 value: WB01
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0xbef7:1:0x0001] Attribute id: 32 value: 41
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0xbef7:1:0x0001] Attribute id: 33 value: 200
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x42d4:1:0x0405] Attribute id: 0 value: 6206
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x94ee:1:0x0402] Attribute id: 0 value: 2340
2020-09-01 14:41:53 DEBUG (MainThread) [zigpy.appdb] [0x94ee:1:0x0405] Attribute id: 0 value: 5221
type or paste code here
1 Like
Can you share steps to run zigbe2mqtt with the original software? I stucked on running it:
Zigbee2MQTT:info 2020-09-08 18:43:48: Starting Zigbee2MQTT version 1.14.4 (commit #unknown)
Zigbee2MQTT:info 2020-09-08 18:43:48: Starting zigbee-herdsman...
Zigbee2MQTT:error 2020-09-08 18:43:48: Error while starting zigbee-herdsman
Zigbee2MQTT:error 2020-09-08 18:43:48: Failed to start zigbee
Zigbee2MQTT:error 2020-09-08 18:43:48: Exiting...
Zigbee2MQTT:error 2020-09-08 18:43:48: Error: Error while opening serialport 'Error: Error: No such file or directory,
I also have this issue. I have:
- SNZB-03 (motion sensor)
- SNZB-02 (temperature sensor)
- SNZB-04 (door sensor)
and they all work fine but…
the SNZB-01 (wireless switch) was easy to add to my Zigbee integration, but does not show the button state, only the battery state.
That’s normal ‘danielmurtagh’.
For reasons I don’t understand, an entity is not created as such for the motion sensor. To use the sensor you need to monitor the event bus for a zha-event produced by the button.
Here’s a Node-RED flow that I created to test a button:
[{"id":"be4429a7.7b2b3","type":"tab","label":"Flow 4","disabled":false,"info":""},{"id":"3a6725d4.62d622","type":"switch","z":"be4429a7.7b2b3","name":"","property":"payload.event.command","propertyType":"msg","rules":[{"t":"eq","v":"toggle","vt":"str"},{"t":"eq","v":"on","vt":"str"},{"t":"eq","v":"off","vt":"str"}],"checkall":"true","repair":false,"outputs":3,"x":270,"y":300,"wires":[["85ee1c58.53547"],["61570751.41b5d"],["3a5eeed8.15850a"]]},{"id":"46fd050.9989afc","type":"server-events","z":"be4429a7.7b2b3","name":"Button","server":"93de20d5.59f72","event_type":"zha_event","exposeToHomeAssistant":false,"haConfig":[{"property":"name","value":""},{"property":"icon","value":""}],"x":70,"y":200,"wires":[["4c499f2f.00b788"]]},{"id":"61570751.41b5d","type":"api-call-service","z":"be4429a7.7b2b3","name":"Effect 2","server":"93de20d5.59f72","version":1,"debugenabled":false,"service_domain":"light","service":"turn_on","entityId":"light.lohas_bulb2","data":"{\"effect\":4,\"profile\":\"relax\"}","dataType":"json","mergecontext":"","output_location":"","output_location_type":"none","mustacheAltTags":false,"x":480,"y":300,"wires":[[]]},{"id":"85ee1c58.53547","type":"api-call-service","z":"be4429a7.7b2b3","name":"Red","server":"93de20d5.59f72","version":1,"debugenabled":false,"service_domain":"light","service":"turn_on","entityId":"light.lohas_bulb2","data":"{\"color_name\": \"red\"}","dataType":"json","mergecontext":"","output_location":"","output_location_type":"none","mustacheAltTags":false,"x":470,"y":220,"wires":[[]]},{"id":"3a5eeed8.15850a","type":"api-call-service","z":"be4429a7.7b2b3","name":"Off","server":"93de20d5.59f72","version":1,"debugenabled":false,"service_domain":"light","service":"turn_off","entityId":"light.lohas_bulb2","data":"","dataType":"json","mergecontext":"","output_location":"","output_location_type":"none","mustacheAltTags":false,"x":470,"y":380,"wires":[[]]},{"id":"4c499f2f.00b788","type":"switch","z":"be4429a7.7b2b3","name":"Button 2","property":"payload.event.unique_id","propertyType":"msg","rules":[{"t":"eq","v":"00:12:4b:00:1c:d6:10:45:1:0x0006","vt":"str"}],"checkall":"true","repair":false,"outputs":1,"x":120,"y":300,"wires":[["3a6725d4.62d622"]]},{"id":"93de20d5.59f72","type":"server","z":"","name":"Home Assistant","legacy":false,"addon":true,"rejectUnauthorizedCerts":true,"ha_boolean":"y|yes|true|on|home|open","connectionDelay":false,"cacheJson":true}]
(I thoroughly recommend that you use node-red. I find it far easier to use than YAML, with its paranoid indentation!)
Jim
Yes after a bit of research it is as Jim says. There is no entity.
The reason (I think) it is not an entity is that it has no defined state ie there is nothing “set” on the switch. It is a momentary press (or long press) which generates an event. You can do whatever you want with that event to trigger actions that change the state of other entities. After you release the switch though the SNZB-01 is not in any different state to what it was before. I think that is why it is not an entity. Here is how to use it in HA:
How did you pair the SNZB-04? It won’t pair with my bridge
Hi tc23,
I followed this Dr Zzs video: https://www.youtube.com/watch?v=xc_HGvrOxp8 and didnt have any major issues.
The pairing button can be a little tricky to access, so you may need to open up the box and remove the circuit board so you can access the button.
Also, Zigbee pairing can sometimes be a little temperamental so you might need to attempt to pair a few times before its successful. Also important to have the device as close as possible to your Zigbee bridge.
Thanks very much for that information, it totally makes sense and I have now set up an event bus monitor and triggers based on Jim’s example and its working perfectly for my 8x sonoff zigbee switches!
Thanks for taking the time to share your knowledge.
Daniel.
Thanks @danielmurtagh, thats what finally did the trick was taking the panel off so I could see the led flash. Got it paired, although it came in as an unknown manufacturer, which doesn’t matter since I renamed it. Very impressed with the tasmota’d zigbee bridge. Have it in my basement and the door sensor on my third floor and its reacting perfectly with no other zigbee repeaters in the middle
Guys, do you know if Sonoff zigbee sensors can trigger Sonoff zigbee switches without Wi-fi / cloud ?
Do you mean LAN?
Yes they can!
But you have to activate it un the app.
Actually on LAN mode its quicker!
No. I mean “no LAN” and “no Wi-fi”.
I don’t get the point of Sonoff zigbee (except low power) if I need Wi-fi or Ewelink cloud.
Why is not possible to have “zigbee scenes” inside zigbee bridge?
1 Like
I guess the closest thing now is LAN and a router, without internet, but somehow WIFI technology is involved
Sonoff only has one Zigbee switch : the SONOFF BASICZBR3 Zigbee. In theory, you should be able to bind your Sonoff Zigbee sensor to the Sonoff Basiczbr3. How to do it depends on your Zigbee integration.
Thanks. It looks like is not working without Internet and using Scenes from Ewelink.
Scenes works only in cloud but zigbee binding is not possible through application.
Ok, I think you use the Sonoff ZbBridge with the native software ? You could flash it with Tasmota and use ZHA.
Should I flash both the Bridge and Sensors/Switches or just the bridge?
Is this working OTA?
Is ZHA cloud capable?
Thanks!
Just the bridge. ZHA is local only, if you want cloud you need to access your HA instance remotely.
