Another TZE200/TS0601 user here…this time a door/vibration sensor. What a crock. I ditched Tuya WiFi devices since the integration doesn’t seem to work for crap and requires renewals… Thought “hey…let’s go zigbee…no more flashing to ESPHome, no Tuya cloud…” Damn you Tuya!
If anyone’s having luck with Zigbee2MQTT please post.
I am responding here because I see this information is recent and might be related to my issue.
I am converting from Hubitat to HA and I’ve got about 300 devices moved.
I am on Home assistant OS
I have 4 zemismart zigbee curtain rails. The model on them in HA is TS0601 like above. All of the rails have entities except one.
I confirmed they are all identical models
I have factory reset a dozen times
I have removed-re-added to the network a dozen times
I’ve tried to pair it right next to zibee repeaters and my zigbee stick
all with the same results.
This isn’t the furthest curtain rail from my zstick. It’s connecting and is being used as a router but there are no entities. Is this related to the same zigpy library you mentioned above? I’m just at a loss why it’s just this one.
Oh, I keep dragging it back to hubitat where it gets the controls on connection every time.
Here you can see it’s meshing with the others:
From what I’m gathering in this thread and this other one: Adding Moes Rad Valve TSO601 I am not doing anything wrong; however, I am completely stumped as to why I’m only having the issue on one device.
To compound matters, I bought two zigbee shades, one connects without entities and the other one doesn’t power on at all. The one showing no entities is exhibiting the same behavior as the rail (and the complaints above). I don’t want to address that one until I address the unit that I KNOW is working because it works on HE and all the others devices of same type are working in the house.
I read in the other thread that an update to the library might be coming soon. Will that help me and the OP of this thread?
As I type this post, gathering screenshots, I just noticed something:
The manufacturer on this device is different from all the others (even though they’re all branded zemismart). My guess is the firmware is different and HA is looking at this device differently.
Hello Sergeantpup, I had the same issue with an in-wall dimmer switch. My ultimate solution was to install an MQTT broker and use the ZIGBEE2MQTT integration. Once I had the integrations working properly I added the device and it works as intended. Please go to Zigbee2MQTT and check to see if your devices are supported by zigbee2mqtt, most likely they are. If so then there’s some really sharp folks here that I’m sure will be able to help you with this more than me as I’m using the supervised version of HA. I’m not an expert by any means, just a geeky guy having fun with HA and home automation. But maybe I can help by pointing you in the right direction.
Hi, I have the exact same issue. I have 4 Zemismart curtain motors added via ZHA (ConBee II stick).
And one of them (_TZE200_rmymn92d) has no entities.
It seems like there is just a mapping missing in zigpy/zha-device-handlers so that _TZE200_rmymn92d is also recognized as zhaquirks.tuya.ts0601_cover.TuyaMoesCover0601.
Are you going to open a github issue for this?
Yes, I will do the leg work of getting in an issue by this weekend.
I’ve made a brief summary of some information I plan to include. I will gladly add your info to this same request because I believe it’s all related. I made a brief post about my plans and info as I understand it, here: Adding Moes Rad Valve TSO601 - #7 by Sergeantpup
My timeline to get this in git is by this weekend. I’m still trying to troubleshoot my OTHER TS0601’s that I can get into hubitat but the control (including RF remote) requires further testing before I can properly articulate it.
I will include your details above as well as anything else you think is important for me to include if you reply.
Thank you for pointing out where we should put this request.
Thank you for pointing out where to submit the issue.
Sane issue here with _TZE200_a4bpgplm. Added to Home Automation but it exposes nothing.
What is the fix within HA?
PS
I read people has reported some success with zigbee2mqtt, but I had quite hard time trying to install, it worked for a while using docker, now is broken again and I’d prefer to stay fully within HA.
What did you do to get the _TZE200_xaabybja motors to work? I have the same device signature as you but having problems.
Can you send me the quirk file you used & let me know if any other files need to be edited to make this work? init.py?
By the way, where do I find this file to edit it?
_TZE200_rmymn92d is still problematic tho. The custom quirk is reading state but not controlling for several of us but confirmed to be working in zigbee2MQTT so I requested a new quirk pulled from that code, yesterday.
You will need to add a line for ("_TZE200_pw7mji0l", "TS0601") to existing quirk if there already is another Tuya device that only has a different Zigbee device signature, if not then it needs a new quirk.
Either add a custom quirk and submit code or submit a device feature request to the respective project.
I have the same issue with blinds switch.
I am running Home Assistant on a container on Raspberry Pi 4, with the Sonoff Zigbee Dongle.
The signature of the device is