Terrible performance on seemingly most android tablets

Configuration Frontend
67

I have noticed if the device has 4GB or less RAM is can be a little laggy. I do have very complex dashboards as seen in Dashboard Hardware and Control

Card-Mod is always the last thing to load when opening a page, gives a perceived lag while waiting for Card-Mod to apply.

  • On my lowest end device OPPO A16s I get an average of 10sec delay until the card-mod is applied, when switching between dashboards.
  • I have a Digital Twin 3D model that is three separate models totalling 15MB this crashes my A16s.

Lenovo Tab 11

  • OS Android
  • Works absolutely fine
  • Loads my Digital Twin 3D model
  • MediaTek® Helio G90T (8C, 2x A76 @2.05GHz + 6x A55 @2.0GHz)
  • 8GB Soldered LPDDR4x

Oppo A16s

  • OS Android
  • Works fine on all of my dashboards except the 3D model
  • Crashes when trying to load my Digital Twin 3D model
  • MediaTek Helio G35 octa-core
  • 4GB Soldered LPDDR4x

Raspberry Pi 400

  • OS Debian Lite
  • Works absolutely fine
  • Loads my Digital Twin 3D model albeit slowly.
  • Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8GHz
  • 4GB LPDDR4-3200

AOPEN WT22M-FW

  • OS ChromeOS
  • Works absolutely fine
  • Loads my Digital Twin 3D model albeit slowly.
  • Intel Core i3-5010U (2.1 GHz, dual-core) with HD Graphics 5500
  • 4 GB DDR3L SDRAM

HP Chromebase

  • OS ChromeOS
  • Works absolutely fine
  • Loads my Digital Twin 3D model
  • Intel Pentium Gold 6405U (2.4 GHz, 2 cores)
  • 4 GB DDR4-2666 MHz RAM

I find most of my devices adequate.

I am unsure if this is improving my performance, but thing I do have in my config is,

recorder:
  exclude:
    event_types:
      - call_service
1 Like