To Proxmox or not to Proxmox

Antonio_Ascione · January 25, 2022, 4:00pm

all installed thanks to your guide.

i have this problems:

nodered 1(1 palette i used before to show cameras on homekit doesn’t esist anymore, for this reason i would copy the palette folder from old node red to the new one)
nodered 2 (always in node red i want save some video files temporaly in a folder so i want see node red folder structure to know where to save it)
mariadb (if i restart the minipc hassio start before than mariadb and this give problem to see the recorder, than i need to restart hassio after mariadb has started)

tteck · January 25, 2022, 4:10pm

/root/.node-red

Set the start order in Proxmox

Antonio_Ascione · January 25, 2022, 4:15pm

in mine i don’t see .nodered

for startup problem now i put 1 to mariadb and 6 to hassio since now this is my container
situation

tteck · January 25, 2022, 4:17pm

Then you didn’t install Webmin on your Node-Red LXC

Antonio_Ascione · January 26, 2022, 3:23pm

any script for homebridge?

tteck · January 26, 2022, 5:08pm

Everything should be handled in Home Assistant? Not sure though…

HomeKit - Home Assistant
HomeKit Controller - Home Assistant
HomeBridge "Please wait while this integration is being setup"

Know nothing about Apple products.

photo64 · January 26, 2022, 8:53pm

I ran the script for Adguard in my Proxmox setup, it installed and is working fine (I believe) however when I try to integrate it in HA it tells me it failed to connect. Is there some additional setup within Proxmox that needs to happen for HA to recognize the integration?

tteck · January 26, 2022, 8:56pm

Not that I’m aware of. Mine Integrated fine, but it’s been several HA versions ago

photo64 · January 26, 2022, 8:59pm

Hmmm, that’s disappointing. I’ve tried numerous things but keep getting the same message.

tteck · January 26, 2022, 9:11pm

I just deleted mine and added it without issue. Make sure you’re using port 80 not 3000

EDIT: added note to repo

photo64 · January 26, 2022, 9:17pm

omg, wish I knew that 2 hours ago. Changing it to 80 did the trick. I don’t recall seeing that or just overlooked it. Thanks so much!

Antonio_Ascione · January 27, 2022, 4:00pm

about nodered i’m have problem to capture a video from an rtsp camera with exec code. If i do the same in nodered included in hassio it works. do you know why?

gerardsamara · January 29, 2022, 11:23am

hi @tteck ,

Before to install Portainer as a LXC , I just run your Webmin install script and it went smoothly ( thanks for your work).
I can connect to webmin IP ( https://ip:10000 ) but i have basic questions ( excuse my ignorance on this ) :

I have a unique proxmox console , no LXC Console .
Webmin does not appear in the LXC list

Thank you

tteck · January 29, 2022, 2:58pm

Webmin is a application that runs on top of the OS, in your case, it’s administrating Proxmox.
It was my intention for Webmin to help administrate LXC’s as the instructions says “run the following in a LXC console.”

The wording helps to differentiate from the Proxmox Shell and the LXC console.

Antonio_Ascione · January 30, 2022, 10:37am

i have changed my dongle with sonoff dongle to check if it works better. i have unistelled lxc and than done all again. Now i get this error with old dongle configured and with sonoff too

any idea?

tteck · January 30, 2022, 11:01am

Did you run the script to allow device passthrough?

Antonio_Ascione · January 30, 2022, 11:17am

yes done and i copied the adress in configuration.yaml too

tteck · January 30, 2022, 3:06pm

Restore a backup

Antonio_Ascione · January 31, 2022, 2:12pm

i had to restart pve even with restore it was not working. i have problem with zigbee signal you think using and usb extender it will be better?

MangoMC · January 31, 2022, 8:01pm

Hey, i try to install z2m via ur scripts but the passthru script doesnt work like i want.

I checked the .conf of the LXC and it looks like this:

arch: amd64
cores: 2
features: nesting=1
hostname: zigbee2mqtt
memory: 1024
net0: name=eth0,bridge=vmbr0,hwaddr=42:65:9C:13:9A:7A,ip=dhcp,type=veth
onboot: 1
ostype: debian
rootfs: local-lvm:vm-106-disk-0,size=4G
swap: 512
lxc.cgroup2.devices.allow: a
lxc.cap.drop:
lxc.autodev: 1
lxc.hook.autodev: bash -c 'for char_dev in $(find /sys/dev/char -regextype sed  -regex ".*/188:.*" -o -regex ".*/189:.*"); do  dev="/dev/$(sed -n "/DEVNAME/ s/^.*=\(.*\)$/\1/p>

the console gives me:

root@zigbee2mqtt:~# ls -l /dev/serial/by-id
ls: cannot access '/dev/serial/by-id': No such file or directory

i guess thats not correct