Tuya Smart Smoke Detector not supported? (TS0601 by _TZE200_uebojraa)

f4stb00t · February 1, 2023, 6:19pm

Well… Still no idea why it works for you, I needed to use the complete path (/home…) to get it to work. Issue fixed.

MarcellusWallace · February 1, 2023, 7:47pm

Sorry, missed your previous message.

I see there is a ‘.’ in your relative path. I think that’s the issue.

MarcellusWallace · February 1, 2023, 7:50pm

Battery issue isn’t solved.
Tried debugging but I don’t see a unknown id coming by.

Even gave the device to a colleague who runs zigbee2mqtt. He didn’t see anything either. The device didn’t work at all in that config.

f4stb00t · February 1, 2023, 8:01pm

I thought the “custom_quirks_path: /config/custom_zha_quirks/” would refer to “/home/homeassistant/.homeassistant/” as the config folder of home assistant is there. But I needed to add “/home/homeassistant/.homeassistant/custom_zha_quirks/” to fix that.

But I also gave up on this device. I tested it to generate an alert. The sirene worked, but the state did not change in HA. And the last thing was basically what I was searching for. Any recommendation for another device?

I thought about the Heimann Zigbee. But there are two different zigbee devices and not sure which one is better/newer (@aliexpress)

Gareth79 · March 25, 2023, 12:48pm

An update which might be of interest, I bought two of these. I used the quirks file, it paired ok, the test button changes the status in HA, but wafting smoke from a vape didn’t seem to activate it. I took the detector apart to check inside (after a report of a soldering error) and all seemed ok.

I then tested with smoke again and the alarm worked! Basically the smoke sensor has fairly tight shrouding, so wafting smoke through the outer vent holes is NOT enough, it needs to dissipate inside which takes a few seconds longer than one might assume. The sensor unit seems to be a commonly available module, so it’s not a design fault that I can see.

I’m using them in addition to ‘dumb’ regular detectors, which I’d advise for anything of this nature!

cylee · August 16, 2023, 6:00am

It works after I rebooted HA. Initially it showed unavailable in HA

petersmith · October 3, 2023, 10:02am

You can give a try to this custom quirk (it also shows the Battery state and the Tampered status), hope that works for you too:

github.com/zigpy/zha-device-handlers

[Device Support Request] Tuya Smoke Detector TS0601 (_TZE200_uebojraa)

opened 09:20AM - 18 Oct 22 UTC

closed 12:25PM - 21 Aug 23 UTC

marcelkous

stale Tuya

I am looking to help add support for this smoke detector into ZHA. ![image](htt…ps://user-images.githubusercontent.com/61436181/196390915-4bbbf1f4-4600-4b0f-a164-200b2aa1d62f.png) I found that it is supported by Zigbee2MQTT (https://zigbee.blakadder.com/Smart9_S9ZB-SA02.html, https://www.zigbee2mqtt.io/devices/TS0601_smoke.html) Hopefully, it can be added quite easily to ZHA also. <details><summary>Device signature</summary> ``` { "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)", "endpoints": { "1": { "profile_id": 260, "device_type": "0x0051", "in_clusters": [ "0x0000", "0x0004", "0x0005", "0xef00" ], "out_clusters": [ "0x000a", "0x0019" ] } }, "manufacturer": "_TZE200_uebojraa", "model": "TS0601", "class": "zigpy.device.Device" } ``` </details> <details><summary>Device diagnostics</summary> ``` { "home_assistant": { "installation_type": "Home Assistant OS", "version": "2022.10.4", "dev": false, "hassio": true, "virtualenv": false, "python_version": "3.10.5", "docker": true, "arch": "x86_64", "timezone": "Europe/Amsterdam", "os_name": "Linux", "os_version": "5.15.72", "supervisor": "2022.10.0", "host_os": "Home Assistant OS 9.2", "docker_version": "20.10.17", "chassis": "vm", "run_as_root": true }, "custom_components": {}, "integration_manifest": { "domain": "zha", "name": "Zigbee Home Automation", "config_flow": true, "documentation": "https://www.home-assistant.io/integrations/zha", "requirements": [ "bellows==0.34.2", "pyserial==3.5", "pyserial-asyncio==0.6", "zha-quirks==0.0.82", "zigpy-deconz==0.19.0", "zigpy==0.51.3", "zigpy-xbee==0.16.2", "zigpy-zigate==0.10.2", "zigpy-znp==0.9.1" ], "usb": [ { "vid": "10C4", "pid": "EA60", "description": "*2652*", "known_devices": [ "slae.sh cc2652rb stick" ] }, { "vid": "1A86", "pid": "55D4", "description": "*sonoff*plus*", "known_devices": [ "sonoff zigbee dongle plus v2" ] }, { "vid": "10C4", "pid": "EA60", "description": "*sonoff*plus*", "known_devices": [ "sonoff zigbee dongle plus" ] }, { "vid": "10C4", "pid": "EA60", "description": "*tubeszb*", "known_devices": [ "TubesZB Coordinator" ] }, { "vid": "1A86", "pid": "7523", "description": "*tubeszb*", "known_devices": [ "TubesZB Coordinator" ] }, { "vid": "1A86", "pid": "7523", "description": "*zigstar*", "known_devices": [ "ZigStar Coordinators" ] }, { "vid": "1CF1", "pid": "0030", "description": "*conbee*", "known_devices": [ "Conbee II" ] }, { "vid": "10C4", "pid": "8A2A", "description": "*zigbee*", "known_devices": [ "Nortek HUSBZB-1" ] }, { "vid": "0403", "pid": "6015", "description": "*zigate*", "known_devices": [ "ZiGate+" ] }, { "vid": "10C4", "pid": "EA60", "description": "*zigate*", "known_devices": [ "ZiGate" ] }, { "vid": "10C4", "pid": "8B34", "description": "*bv 2010/10*", "known_devices": [ "Bitron Video AV2010/10" ] } ], "codeowners": [ "@dmulcahey", "@adminiuga", "@puddly" ], "zeroconf": [ { "type": "_esphomelib._tcp.local.", "name": "tube*" }, { "type": "_zigate-zigbee-gateway._tcp.local.", "name": "*zigate*" }, { "type": "_zigstar_gw._tcp.local.", "name": "*zigstar*" } ], "dependencies": [ "file_upload" ], "after_dependencies": [ "onboarding", "usb", "zeroconf" ], "iot_class": "local_polling", "loggers": [ "aiosqlite", "bellows", "crccheck", "pure_pcapy3", "zhaquirks", "zigpy", "zigpy_deconz", "zigpy_xbee", "zigpy_zigate", "zigpy_znp" ], "is_built_in": true }, "data": { "ieee": "**REDACTED**", "nwk": 43698, "manufacturer": "_TZE200_uebojraa", "model": "TS0601", "name": "_TZE200_uebojraa TS0601", "quirk_applied": false, "quirk_class": "zigpy.device.Device", "manufacturer_code": 4417, "power_source": "Battery or Unknown", "lqi": 255, "rssi": -27, "last_seen": "2022-10-18T11:08:57", "available": true, "device_type": "EndDevice", "signature": { "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)", "endpoints": { "1": { "profile_id": 260, "device_type": "0x0051", "in_clusters": [ "0x0000", "0x0004", "0x0005", "0xef00" ], "out_clusters": [ "0x000a", "0x0019" ] } } }, "active_coordinator": false, "entities": [], "neighbors": [], "endpoint_names": [ { "name": "SMART_PLUG" } ], "user_given_name": null, "device_reg_id": "6083f6faff90d7bc03ce1dd8bf3135fd", "area_id": "f94dff210e784ca9a49f31421a22d036", "cluster_details": { "1": { "device_type": { "name": "SMART_PLUG", "id": 81 }, "profile_id": 260, "in_clusters": { "0x0004": { "endpoint_attribute": "groups", "attributes": {}, "unsupported_attributes": {} }, "0x0005": { "endpoint_attribute": "scenes", "attributes": {}, "unsupported_attributes": {} }, "0xef00": { "endpoint_attribute": null, "attributes": {}, "unsupported_attributes": {} }, "0x0000": { "endpoint_attribute": "basic", "attributes": { "0x0001": { "attribute_name": "app_version", "value": 67 }, "0x0004": { "attribute_name": "manufacturer", "value": "_TZE200_uebojraa" }, "0x0005": { "attribute_name": "model", "value": "TS0601" } }, "unsupported_attributes": {} } }, "out_clusters": { "0x0019": { "endpoint_attribute": "ota", "attributes": {}, "unsupported_attributes": {} }, "0x000a": { "endpoint_attribute": "time", "attributes": {}, "unsupported_attributes": {} } } } } } } ``` </details> <details><summary>Additional Logs</summary> #### Adding device log (tried to keep it as clean as possible) ``` [0x7B67:1:0x0b04]: async_update [0x7B67:1:0x0b04]: Reading attributes in chunks: ['active_power', 'rms_current', 'rms_voltage'] [0x7B67:1:0x0b04] Sending request header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Server_to_Client: 0>, disable_default_response=0, reserved=0, *is_cluster=False, *is_general=True, *is_reply=False), tsn=44, command_id=<GeneralCommand.Read_Attributes: 0>, *direction=<Direction.Server_to_Client: 0>, *is_reply=False) [0x7B67:1:0x0b04] Sending request: Read_Attributes(attribute_ids=[1291, 1288, 1285]) New device 0xaab2 (a4:c1:38:b7:87:51:44:76) joined the network [0xaab2] Scheduling initialization Tries remaining: 3 [0xaab2] Requesting 'Node Descriptor' Tries remaining: 2 [0xaab2] Extending timeout for 0x2e request Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.ALL_ROUTERS_AND_COORDINATOR: 65532>), dst_ep=0, source_route=None, extended_timeout=False, tsn=30, profile_id=0, cluster_id=19, data=Serialized[b'4\xb2\xaavDQ\x87\xb78\xc1\xa4\x80'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) Device 0xaab2 (a4:c1:38:b7:87:51:44:76) joined the network [0xaab2] Scheduling initialization [0xaab2] Canceling old initialize call Received frame on uninitialized device <Device model=None manuf=None nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=False> from ep 0 to ep 0, cluster 19: b'4\xb2\xaavDQ\x87\xb78\xc1\xa4\x80' [0xaab2:zdo] ZDO request ZDOCmd.Device_annce: [0xAAB2, a4:c1:38:b7:87:51:44:76, 128] Tries remaining: 3 [0xaab2] Requesting 'Node Descriptor' Tries remaining: 2 [0xaab2] Extending timeout for 0x30 request Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=31, profile_id=0, cluster_id=32770, data=Serialized[b'.\x00\xb2\xaa\x02@\x80A\x11BB\x00\x00*B\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) Received frame on uninitialized device <Device model=None manuf=None nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=False> from ep 0 to ep 0, cluster 32770: b'.\x00\xb2\xaa\x02@\x80A\x11BB\x00\x00*B\x00\x00' [0xaab2:zdo] ZDO request ZDOCmd.Node_Desc_rsp: [<Status.SUCCESS: 0>, 0xAAB2, NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)] [0xaab2:zdo] No handler for ZDO request:ZDOCmd.Node_Desc_rsp([<Status.SUCCESS: 0>, 0xAAB2, NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)]) Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=32, profile_id=0, cluster_id=32770, data=Serialized[b'0\x00\xb2\xaa\x02@\x80A\x11BB\x00\x00*B\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) Received frame on uninitialized device <Device model=None manuf=None nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=False> from ep 0 to ep 0, cluster 32770: b'0\x00\xb2\xaa\x02@\x80A\x11BB\x00\x00*B\x00\x00' [0xaab2] Got Node Descriptor: NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False) [0xaab2] Discovering endpoints Tries remaining: 3 [0xaab2] Extending timeout for 0x32 request Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=33, profile_id=0, cluster_id=32773, data=Serialized[b'2\x00\xb2\xaa\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) Received frame on uninitialized device <Device model=None manuf=None nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=False> from ep 0 to ep 0, cluster 32773: b'2\x00\xb2\xaa\x01\x01' [0xaab2] Discovered endpoints: [1] [0xaab2] Initializing endpoints [<Endpoint id=1 in=[] out=[] status=<Status.NEW: 0>>] [0xaab2:1] Discovering endpoint information Tries remaining: 3 [0xaab2] Extending timeout for 0x34 request Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=34, profile_id=0, cluster_id=32772, data=Serialized[b'4\x00\xb2\xaa\x14\x01\x04\x01Q\x00\x01\x04\x04\x00\x05\x00\x00\xef\x00\x00\x02\x19\x00\n\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) Received frame on uninitialized device <Device model=None manuf=None nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=False> from ep 0 to ep 0, cluster 32772: b'4\x00\xb2\xaa\x14\x01\x04\x01Q\x00\x01\x04\x04\x00\x05\x00\x00\xef\x00\x00\x02\x19\x00\n\x00' [0xaab2:1] Discovered endpoint information: SizePrefixedSimpleDescriptor(endpoint=1, profile=260, device_type=81, device_version=1, input_clusters=[4, 5, 61184, 0], output_clusters=[25, 10]) Unknown cluster 0xEF00 [0xAAB2:1:0x0000] Sending request header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Server_to_Client: 0>, disable_default_response=0, reserved=0, *is_cluster=False, *is_general=True, *is_reply=False), tsn=54, command_id=<GeneralCommand.Read_Attributes: 0>, *direction=<Direction.Server_to_Client: 0>, *is_reply=False) [0xAAB2:1:0x0000] Sending request: Read_Attributes(attribute_ids=[4, 5]) [0xaab2] Extending timeout for 0x36 request Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=35, profile_id=260, cluster_id=0, data=Serialized[b'\x186\x01\x04\x00\x00B\x10_TZE200_uebojraa\x05\x00\x00B\x06TS0601'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) [0xAAB2:1:0x0000] Received ZCL frame: b'\x186\x01\x04\x00\x00B\x10_TZE200_uebojraa\x05\x00\x00B\x06TS0601' [0xAAB2:1:0x0000] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=54, command_id=1, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x0000] Decoded ZCL frame: Basic:Read_Attributes_rsp(status_records=[ReadAttributeRecord(attrid=0x0004, status=<Status.SUCCESS: 0>, value=TypeValue(type=CharacterString, value='_TZE200_uebojraa')), ReadAttributeRecord(attrid=0x0005, status=<Status.SUCCESS: 0>, value=TypeValue(type=CharacterString, value='TS0601'))]) [0xaab2] Read model 'TS0601' and manufacturer '_TZE200_uebojraa' from <Endpoint id=1 in=[groups:0x0004, scenes:0x0005, None:0xEF00, basic:0x0000] out=[ota:0x0019, time:0x000A] status=<Status.ZDO_INIT: 1>> [0xaab2] Discovered basic device information for <Device model='TS0601' manuf='_TZE200_uebojraa' nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=True> Device is initialized <Device model='TS0601' manuf='_TZE200_uebojraa' nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=True> Checking quirks for _TZE200_uebojraa TS0601 (a4:c1:38:b7:87:51:44:76) Considering <class 'zhaquirks.xiaomi.aqara.opple_switch.XiaomiOpple2ButtonSwitchFace2'> Fail because endpoint list mismatch: {1, 2, 242} {1} Considering <class 'zhaquirks.xiaomi.aqara.opple_switch.XiaomiOpple2ButtonSwitchFace1'> Fail because endpoint list mismatch: {1, 2, 41, 42, 242, 51, 21, 31} {1} Considering <class 'zhaquirks.xbee.xbee_io.XBeeSensor'> Fail because endpoint list mismatch: {232, 230} {1} Considering <class 'zhaquirks.xbee.xbee3_io.XBee3Sensor'> Fail because endpoint list mismatch: {232, 230} {1} Considering <class 'zhaquirks.tuya.ts0201.MoesTemperatureHumidtySensorWithScreen'> Fail because device_type mismatch on at least one endpoint Considering <class 'zhaquirks.smartthings.tag_v4.SmartThingsTagV4'> Fail because device_type mismatch on at least one endpoint Considering <class 'zhaquirks.smartthings.multi.SmartthingsMultiPurposeSensor'> Fail because device_type mismatch on at least one endpoint Considering <class 'zhaquirks.netvox.z308e3ed.Z308E3ED'> Fail because device_type mismatch on at least one endpoint Considering <class 'zhaquirks.gledopto.soposhgu10.SoposhGU10'> Fail because endpoint list mismatch: {11, 13} {1} 'sensor' component -> 'RSSISensor' using ['basic'] 'sensor' component -> 'LQISensor' using ['basic'] device - 0xAAB2:a4:c1:38:b7:87:51:44:76 entering async_device_initialized - is_new_join: True device - 0xAAB2:a4:c1:38:b7:87:51:44:76 has joined the ZHA zigbee network [0xAAB2](TS0601): started configuration [0xAAB2:ZDO](TS0601): 'async_configure' stage succeeded [0xAAB2:1:0x0000]: Configuring cluster attribute reporting [0xAAB2:1:0x0000]: finished channel configuration [0xAAB2:1:0x0019]: finished channel configuration [0xAAB2:1:0x0000]: 'async_configure' stage succeeded [0xAAB2:1:0x0019]: 'async_configure' stage succeeded [0xAAB2](TS0601): completed configuration [0xAAB2](TS0601): started initialization [0xAAB2:ZDO](TS0601): 'async_initialize' stage succeeded [0xAAB2:1:0x0000]: initializing channel: from_cache: False [0xAAB2:1:0x0000]: finished channel initialization [0xAAB2:1:0x0019]: initializing channel: from_cache: False [0xAAB2:1:0x0019]: finished channel initialization [0xAAB2:1:0x0000]: 'async_initialize' stage succeeded [0xAAB2:1:0x0019]: 'async_initialize' stage succeeded [0xAAB2](TS0601): power source: Battery or Unknown [0xAAB2](TS0601): completed initialization Error handling '_save_attribute' event with (a4:c1:38:b7:87:51:44:76, 1, 0, 4, '_TZE200_uebojraa') params: FOREIGN KEY constraint failed Error handling '_save_attribute' event with (a4:c1:38:b7:87:51:44:76, 1, 0, 5, 'TS0601') params: FOREIGN KEY constraint failed Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=36, profile_id=0, cluster_id=2, data=Serialized[b'5\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) [0xaab2:zdo] ZDO request ZDOCmd.Node_Desc_req: [0x0000] [0xaab2:zdo] No handler for ZDO request:ZDOCmd.Node_Desc_req([0x0000]) Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.ALL_ROUTERS_AND_COORDINATOR: 65532>), dst_ep=0, source_route=None, extended_timeout=False, tsn=39, profile_id=0, cluster_id=54, data=Serialized[b'6\xb4\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) [0xaab2:zdo] ZDO request ZDOCmd.Mgmt_Permit_Joining_req: [180, <Bool.true: 1>] [0x7B67:1:0x0b04]: failed to get attributes '['active_power', 'rms_current', 'rms_voltage']' on 'electrical_measurement' cluster: Failed to deliver message: <EmberStatus.DELIVERY_FAILED: 102> Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=40, profile_id=260, cluster_id=61184, data=Serialized[b'\tp\x11\x00;@'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-28) [0xAAB2:1:0xef00] Received ZCL frame: b'\tp\x11\x00;@' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=112, command_id=17, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 17 b'\x00;@' [0xAAB2:1:0xef00] Received command 0x11 (TSN 112): b'\x00;@' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x11: b'\x00;@' [0x6306](01MINIZB): Device seen - marking the device available and resetting counter [0x6306](01MINIZB): Update device availability - device available: True - new availability: True - changed: False Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=41, profile_id=260, cluster_id=61184, data=Serialized[b'\tp\x11\x00;@'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-28) [0xAAB2:1:0xef00] Received ZCL frame: b'\tp\x11\x00;@' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=112, command_id=17, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 17 b'\x00;@' [0xAAB2:1:0xef00] Received command 0x11 (TSN 112): b'\x00;@' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x11: b'\x00;@' [0xDD77](TRADFRI Signal Repeater): last_seen is 15602398.541951656 seconds ago and ping attempts have been exhausted, marking the device unavailable [0xDD77](TRADFRI Signal Repeater): Update device availability - device available: False - new availability: False - changed: False Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=42, profile_id=260, cluster_id=61184, data=Serialized[b'\tp\x11\x00;@'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-28) [0xAAB2:1:0xef00] Received ZCL frame: b'\tp\x11\x00;@' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=112, command_id=17, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 17 b'\x00;@' [0xAAB2:1:0xef00] Received command 0x11 (TSN 112): b'\x00;@' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x11: b'\x00;@' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=43, profile_id=260, cluster_id=0, data=Serialized[b'\x08q\n\x01\x00 C\xe2\xff 1\xe4\xff \x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0x0000] Received ZCL frame: b'\x08q\n\x01\x00 C\xe2\xff 1\xe4\xff \x00' [0xAAB2:1:0x0000] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=113, command_id=10, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x0000] Decoded ZCL frame: Basic:Report_Attributes(attribute_reports=[Attribute(attrid=0x0001, value=TypeValue(type=uint8_t, value=67)), Attribute(attrid=0xFFE2, value=TypeValue(type=uint8_t, value=49)), Attribute(attrid=0xFFE4, value=TypeValue(type=uint8_t, value=0))]) [0xAAB2:1:0x0000] Received command 0x0A (TSN 113): Report_Attributes(attribute_reports=[Attribute(attrid=0x0001, value=TypeValue(type=uint8_t, value=67)), Attribute(attrid=0xFFE2, value=TypeValue(type=uint8_t, value=49)), Attribute(attrid=0xFFE4, value=TypeValue(type=uint8_t, value=0))]) [0xAAB2:1:0x0000] Attribute report received: app_version=67, 0xFFE2=49, 0xFFE4=0 [0xAAB2:1:0x0000] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Client_to_Server: 1>, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=113, command_id=<GeneralCommand.Default_Response: 11>, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x0000] Sending reply: Default_Response(command_id=10, status=<Status.SUCCESS: 0>) Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=44, profile_id=260, cluster_id=10, data=Serialized[b'\x00r\x00\x07\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0x000a] Received ZCL frame: b'\x00r\x00\x07\x00' [0xAAB2:1:0x000a] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, direction=<Direction.Server_to_Client: 0>, disable_default_response=0, reserved=0, *is_cluster=False, *is_general=True, *is_reply=False), tsn=114, command_id=0, *direction=<Direction.Server_to_Client: 0>, *is_reply=False) [0xAAB2:1:0x000a] Decoded ZCL frame: Time:Read_Attributes(attribute_ids=[7]) [0xAAB2:1:0x000a] Received command 0x00 (TSN 114): Read_Attributes(attribute_ids=[7]) [0xAAB2:1:0x000a] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Client_to_Server: 1>, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=114, command_id=<GeneralCommand.Read_Attributes_rsp: 1>, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x000a] Sending reply: Read_Attributes_rsp(status_records=[ReadAttributeRecord(attrid=0x0007, status=<Status.SUCCESS: 0>, value=TypeValue(type=LocalTime, value=719406532))]) Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=45, profile_id=260, cluster_id=0, data=Serialized[b'\x08s\n\xdf\xffB\x0f\xb5E\xe1*f\xb5E\xe1*\x13\xb6E\xe1*\x12'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0x0000] Received ZCL frame: b'\x08s\n\xdf\xffB\x0f\xb5E\xe1*f\xb5E\xe1*\x13\xb6E\xe1*\x12' [0xAAB2:1:0x0000] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=115, command_id=10, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x0000] Decoded ZCL frame: Basic:Report_Attributes(attribute_reports=[Attribute(attrid=0xFFDF, value=TypeValue(type=CharacterString, value='�E�*f�E�*\x13�E�*\x12'))]) [0xAAB2:1:0x0000] Received command 0x0A (TSN 115): Report_Attributes(attribute_reports=[Attribute(attrid=0xFFDF, value=TypeValue(type=CharacterString, value='�E�*f�E�*\x13�E�*\x12'))]) [0xAAB2:1:0x0000] Attribute report received: 0xFFDF='�E�*f�E�*\x13�E�*\x12' [0xAAB2:1:0x0000] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Client_to_Server: 1>, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=115, command_id=<GeneralCommand.Default_Response: 11>, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x0000] Sending reply: Default_Response(command_id=10, status=<Status.SUCCESS: 0>) [0xC582](SYMFONISK Sound Controller): last_seen is 8058877.430959702 seconds ago and ping attempts have been exhausted, marking the device unavailable [0xC582](SYMFONISK Sound Controller): Update device availability - device available: False - new availability: False - changed: False Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=46, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-28) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=47, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=48, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=49, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=50, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=51, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=52, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=53, profile_id=260, cluster_id=61184, data=Serialized[b'\tu\x02\x00?\x0e\x04\x00\x01\x02'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tu\x02\x00?\x0e\x04\x00\x01\x02' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=117, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00?\x0e\x04\x00\x01\x02' [0xAAB2:1:0xef00] Received command 0x02 (TSN 117): b'\x00?\x0e\x04\x00\x01\x02' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00?\x0e\x04\x00\x01\x02' ``` </details>

MarcellusWallace · October 3, 2023, 10:01pm

Hi,

This custom quirk seems to work indeed. I see the battery status and tampered status (binary input). Not sure if it actually works. We will see in the future ( I had to add the model info, ("_TZE200_uebojraa", "TS0601"),).
This device goes often ‘offline’ (being a dead device), so I’m interested to see if this quirk makes it more stable or if it is just the device that is bad.

ViperRNMC · October 4, 2023, 2:07pm

thanks, custom quirk works fine

MarcellusWallace · November 6, 2023, 9:37am

Still working, didn’t go offline anymore

musicscore · January 19, 2024, 11:00am

Battery not showing,

I used this file

github.com/zigpy/zha-device-handlers

[Device Support Request] Tuya Smoke Detector TS0601 (_TZE200_uebojraa)

opened 09:20AM - 18 Oct 22 UTC

marcelkous

Tuya custom quirk available

I am looking to help add support for this smoke detector into ZHA. ![image](htt…ps://user-images.githubusercontent.com/61436181/196390915-4bbbf1f4-4600-4b0f-a164-200b2aa1d62f.png) I found that it is supported by Zigbee2MQTT (https://zigbee.blakadder.com/Smart9_S9ZB-SA02.html, https://www.zigbee2mqtt.io/devices/TS0601_smoke.html) Hopefully, it can be added quite easily to ZHA also. <details><summary>Device signature</summary> ``` { "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)", "endpoints": { "1": { "profile_id": 260, "device_type": "0x0051", "in_clusters": [ "0x0000", "0x0004", "0x0005", "0xef00" ], "out_clusters": [ "0x000a", "0x0019" ] } }, "manufacturer": "_TZE200_uebojraa", "model": "TS0601", "class": "zigpy.device.Device" } ``` </details> <details><summary>Device diagnostics</summary> ``` { "home_assistant": { "installation_type": "Home Assistant OS", "version": "2022.10.4", "dev": false, "hassio": true, "virtualenv": false, "python_version": "3.10.5", "docker": true, "arch": "x86_64", "timezone": "Europe/Amsterdam", "os_name": "Linux", "os_version": "5.15.72", "supervisor": "2022.10.0", "host_os": "Home Assistant OS 9.2", "docker_version": "20.10.17", "chassis": "vm", "run_as_root": true }, "custom_components": {}, "integration_manifest": { "domain": "zha", "name": "Zigbee Home Automation", "config_flow": true, "documentation": "https://www.home-assistant.io/integrations/zha", "requirements": [ "bellows==0.34.2", "pyserial==3.5", "pyserial-asyncio==0.6", "zha-quirks==0.0.82", "zigpy-deconz==0.19.0", "zigpy==0.51.3", "zigpy-xbee==0.16.2", "zigpy-zigate==0.10.2", "zigpy-znp==0.9.1" ], "usb": [ { "vid": "10C4", "pid": "EA60", "description": "*2652*", "known_devices": [ "slae.sh cc2652rb stick" ] }, { "vid": "1A86", "pid": "55D4", "description": "*sonoff*plus*", "known_devices": [ "sonoff zigbee dongle plus v2" ] }, { "vid": "10C4", "pid": "EA60", "description": "*sonoff*plus*", "known_devices": [ "sonoff zigbee dongle plus" ] }, { "vid": "10C4", "pid": "EA60", "description": "*tubeszb*", "known_devices": [ "TubesZB Coordinator" ] }, { "vid": "1A86", "pid": "7523", "description": "*tubeszb*", "known_devices": [ "TubesZB Coordinator" ] }, { "vid": "1A86", "pid": "7523", "description": "*zigstar*", "known_devices": [ "ZigStar Coordinators" ] }, { "vid": "1CF1", "pid": "0030", "description": "*conbee*", "known_devices": [ "Conbee II" ] }, { "vid": "10C4", "pid": "8A2A", "description": "*zigbee*", "known_devices": [ "Nortek HUSBZB-1" ] }, { "vid": "0403", "pid": "6015", "description": "*zigate*", "known_devices": [ "ZiGate+" ] }, { "vid": "10C4", "pid": "EA60", "description": "*zigate*", "known_devices": [ "ZiGate" ] }, { "vid": "10C4", "pid": "8B34", "description": "*bv 2010/10*", "known_devices": [ "Bitron Video AV2010/10" ] } ], "codeowners": [ "@dmulcahey", "@adminiuga", "@puddly" ], "zeroconf": [ { "type": "_esphomelib._tcp.local.", "name": "tube*" }, { "type": "_zigate-zigbee-gateway._tcp.local.", "name": "*zigate*" }, { "type": "_zigstar_gw._tcp.local.", "name": "*zigstar*" } ], "dependencies": [ "file_upload" ], "after_dependencies": [ "onboarding", "usb", "zeroconf" ], "iot_class": "local_polling", "loggers": [ "aiosqlite", "bellows", "crccheck", "pure_pcapy3", "zhaquirks", "zigpy", "zigpy_deconz", "zigpy_xbee", "zigpy_zigate", "zigpy_znp" ], "is_built_in": true }, "data": { "ieee": "**REDACTED**", "nwk": 43698, "manufacturer": "_TZE200_uebojraa", "model": "TS0601", "name": "_TZE200_uebojraa TS0601", "quirk_applied": false, "quirk_class": "zigpy.device.Device", "manufacturer_code": 4417, "power_source": "Battery or Unknown", "lqi": 255, "rssi": -27, "last_seen": "2022-10-18T11:08:57", "available": true, "device_type": "EndDevice", "signature": { "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)", "endpoints": { "1": { "profile_id": 260, "device_type": "0x0051", "in_clusters": [ "0x0000", "0x0004", "0x0005", "0xef00" ], "out_clusters": [ "0x000a", "0x0019" ] } } }, "active_coordinator": false, "entities": [], "neighbors": [], "endpoint_names": [ { "name": "SMART_PLUG" } ], "user_given_name": null, "device_reg_id": "6083f6faff90d7bc03ce1dd8bf3135fd", "area_id": "f94dff210e784ca9a49f31421a22d036", "cluster_details": { "1": { "device_type": { "name": "SMART_PLUG", "id": 81 }, "profile_id": 260, "in_clusters": { "0x0004": { "endpoint_attribute": "groups", "attributes": {}, "unsupported_attributes": {} }, "0x0005": { "endpoint_attribute": "scenes", "attributes": {}, "unsupported_attributes": {} }, "0xef00": { "endpoint_attribute": null, "attributes": {}, "unsupported_attributes": {} }, "0x0000": { "endpoint_attribute": "basic", "attributes": { "0x0001": { "attribute_name": "app_version", "value": 67 }, "0x0004": { "attribute_name": "manufacturer", "value": "_TZE200_uebojraa" }, "0x0005": { "attribute_name": "model", "value": "TS0601" } }, "unsupported_attributes": {} } }, "out_clusters": { "0x0019": { "endpoint_attribute": "ota", "attributes": {}, "unsupported_attributes": {} }, "0x000a": { "endpoint_attribute": "time", "attributes": {}, "unsupported_attributes": {} } } } } } } ``` </details> <details><summary>Additional Logs</summary> #### Adding device log (tried to keep it as clean as possible) ``` [0x7B67:1:0x0b04]: async_update [0x7B67:1:0x0b04]: Reading attributes in chunks: ['active_power', 'rms_current', 'rms_voltage'] [0x7B67:1:0x0b04] Sending request header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Server_to_Client: 0>, disable_default_response=0, reserved=0, *is_cluster=False, *is_general=True, *is_reply=False), tsn=44, command_id=<GeneralCommand.Read_Attributes: 0>, *direction=<Direction.Server_to_Client: 0>, *is_reply=False) [0x7B67:1:0x0b04] Sending request: Read_Attributes(attribute_ids=[1291, 1288, 1285]) New device 0xaab2 (a4:c1:38:b7:87:51:44:76) joined the network [0xaab2] Scheduling initialization Tries remaining: 3 [0xaab2] Requesting 'Node Descriptor' Tries remaining: 2 [0xaab2] Extending timeout for 0x2e request Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.ALL_ROUTERS_AND_COORDINATOR: 65532>), dst_ep=0, source_route=None, extended_timeout=False, tsn=30, profile_id=0, cluster_id=19, data=Serialized[b'4\xb2\xaavDQ\x87\xb78\xc1\xa4\x80'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) Device 0xaab2 (a4:c1:38:b7:87:51:44:76) joined the network [0xaab2] Scheduling initialization [0xaab2] Canceling old initialize call Received frame on uninitialized device <Device model=None manuf=None nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=False> from ep 0 to ep 0, cluster 19: b'4\xb2\xaavDQ\x87\xb78\xc1\xa4\x80' [0xaab2:zdo] ZDO request ZDOCmd.Device_annce: [0xAAB2, a4:c1:38:b7:87:51:44:76, 128] Tries remaining: 3 [0xaab2] Requesting 'Node Descriptor' Tries remaining: 2 [0xaab2] Extending timeout for 0x30 request Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=31, profile_id=0, cluster_id=32770, data=Serialized[b'.\x00\xb2\xaa\x02@\x80A\x11BB\x00\x00*B\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) Received frame on uninitialized device <Device model=None manuf=None nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=False> from ep 0 to ep 0, cluster 32770: b'.\x00\xb2\xaa\x02@\x80A\x11BB\x00\x00*B\x00\x00' [0xaab2:zdo] ZDO request ZDOCmd.Node_Desc_rsp: [<Status.SUCCESS: 0>, 0xAAB2, NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)] [0xaab2:zdo] No handler for ZDO request:ZDOCmd.Node_Desc_rsp([<Status.SUCCESS: 0>, 0xAAB2, NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)]) Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=32, profile_id=0, cluster_id=32770, data=Serialized[b'0\x00\xb2\xaa\x02@\x80A\x11BB\x00\x00*B\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) Received frame on uninitialized device <Device model=None manuf=None nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=False> from ep 0 to ep 0, cluster 32770: b'0\x00\xb2\xaa\x02@\x80A\x11BB\x00\x00*B\x00\x00' [0xaab2] Got Node Descriptor: NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False) [0xaab2] Discovering endpoints Tries remaining: 3 [0xaab2] Extending timeout for 0x32 request Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=33, profile_id=0, cluster_id=32773, data=Serialized[b'2\x00\xb2\xaa\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) Received frame on uninitialized device <Device model=None manuf=None nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=False> from ep 0 to ep 0, cluster 32773: b'2\x00\xb2\xaa\x01\x01' [0xaab2] Discovered endpoints: [1] [0xaab2] Initializing endpoints [<Endpoint id=1 in=[] out=[] status=<Status.NEW: 0>>] [0xaab2:1] Discovering endpoint information Tries remaining: 3 [0xaab2] Extending timeout for 0x34 request Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=34, profile_id=0, cluster_id=32772, data=Serialized[b'4\x00\xb2\xaa\x14\x01\x04\x01Q\x00\x01\x04\x04\x00\x05\x00\x00\xef\x00\x00\x02\x19\x00\n\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) Received frame on uninitialized device <Device model=None manuf=None nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=False> from ep 0 to ep 0, cluster 32772: b'4\x00\xb2\xaa\x14\x01\x04\x01Q\x00\x01\x04\x04\x00\x05\x00\x00\xef\x00\x00\x02\x19\x00\n\x00' [0xaab2:1] Discovered endpoint information: SizePrefixedSimpleDescriptor(endpoint=1, profile=260, device_type=81, device_version=1, input_clusters=[4, 5, 61184, 0], output_clusters=[25, 10]) Unknown cluster 0xEF00 [0xAAB2:1:0x0000] Sending request header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Server_to_Client: 0>, disable_default_response=0, reserved=0, *is_cluster=False, *is_general=True, *is_reply=False), tsn=54, command_id=<GeneralCommand.Read_Attributes: 0>, *direction=<Direction.Server_to_Client: 0>, *is_reply=False) [0xAAB2:1:0x0000] Sending request: Read_Attributes(attribute_ids=[4, 5]) [0xaab2] Extending timeout for 0x36 request Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=35, profile_id=260, cluster_id=0, data=Serialized[b'\x186\x01\x04\x00\x00B\x10_TZE200_uebojraa\x05\x00\x00B\x06TS0601'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) [0xAAB2:1:0x0000] Received ZCL frame: b'\x186\x01\x04\x00\x00B\x10_TZE200_uebojraa\x05\x00\x00B\x06TS0601' [0xAAB2:1:0x0000] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=54, command_id=1, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x0000] Decoded ZCL frame: Basic:Read_Attributes_rsp(status_records=[ReadAttributeRecord(attrid=0x0004, status=<Status.SUCCESS: 0>, value=TypeValue(type=CharacterString, value='_TZE200_uebojraa')), ReadAttributeRecord(attrid=0x0005, status=<Status.SUCCESS: 0>, value=TypeValue(type=CharacterString, value='TS0601'))]) [0xaab2] Read model 'TS0601' and manufacturer '_TZE200_uebojraa' from <Endpoint id=1 in=[groups:0x0004, scenes:0x0005, None:0xEF00, basic:0x0000] out=[ota:0x0019, time:0x000A] status=<Status.ZDO_INIT: 1>> [0xaab2] Discovered basic device information for <Device model='TS0601' manuf='_TZE200_uebojraa' nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=True> Device is initialized <Device model='TS0601' manuf='_TZE200_uebojraa' nwk=0xAAB2 ieee=a4:c1:38:b7:87:51:44:76 is_initialized=True> Checking quirks for _TZE200_uebojraa TS0601 (a4:c1:38:b7:87:51:44:76) Considering <class 'zhaquirks.xiaomi.aqara.opple_switch.XiaomiOpple2ButtonSwitchFace2'> Fail because endpoint list mismatch: {1, 2, 242} {1} Considering <class 'zhaquirks.xiaomi.aqara.opple_switch.XiaomiOpple2ButtonSwitchFace1'> Fail because endpoint list mismatch: {1, 2, 41, 42, 242, 51, 21, 31} {1} Considering <class 'zhaquirks.xbee.xbee_io.XBeeSensor'> Fail because endpoint list mismatch: {232, 230} {1} Considering <class 'zhaquirks.xbee.xbee3_io.XBee3Sensor'> Fail because endpoint list mismatch: {232, 230} {1} Considering <class 'zhaquirks.tuya.ts0201.MoesTemperatureHumidtySensorWithScreen'> Fail because device_type mismatch on at least one endpoint Considering <class 'zhaquirks.smartthings.tag_v4.SmartThingsTagV4'> Fail because device_type mismatch on at least one endpoint Considering <class 'zhaquirks.smartthings.multi.SmartthingsMultiPurposeSensor'> Fail because device_type mismatch on at least one endpoint Considering <class 'zhaquirks.netvox.z308e3ed.Z308E3ED'> Fail because device_type mismatch on at least one endpoint Considering <class 'zhaquirks.gledopto.soposhgu10.SoposhGU10'> Fail because endpoint list mismatch: {11, 13} {1} 'sensor' component -> 'RSSISensor' using ['basic'] 'sensor' component -> 'LQISensor' using ['basic'] device - 0xAAB2:a4:c1:38:b7:87:51:44:76 entering async_device_initialized - is_new_join: True device - 0xAAB2:a4:c1:38:b7:87:51:44:76 has joined the ZHA zigbee network [0xAAB2](TS0601): started configuration [0xAAB2:ZDO](TS0601): 'async_configure' stage succeeded [0xAAB2:1:0x0000]: Configuring cluster attribute reporting [0xAAB2:1:0x0000]: finished channel configuration [0xAAB2:1:0x0019]: finished channel configuration [0xAAB2:1:0x0000]: 'async_configure' stage succeeded [0xAAB2:1:0x0019]: 'async_configure' stage succeeded [0xAAB2](TS0601): completed configuration [0xAAB2](TS0601): started initialization [0xAAB2:ZDO](TS0601): 'async_initialize' stage succeeded [0xAAB2:1:0x0000]: initializing channel: from_cache: False [0xAAB2:1:0x0000]: finished channel initialization [0xAAB2:1:0x0019]: initializing channel: from_cache: False [0xAAB2:1:0x0019]: finished channel initialization [0xAAB2:1:0x0000]: 'async_initialize' stage succeeded [0xAAB2:1:0x0019]: 'async_initialize' stage succeeded [0xAAB2](TS0601): power source: Battery or Unknown [0xAAB2](TS0601): completed initialization Error handling '_save_attribute' event with (a4:c1:38:b7:87:51:44:76, 1, 0, 4, '_TZE200_uebojraa') params: FOREIGN KEY constraint failed Error handling '_save_attribute' event with (a4:c1:38:b7:87:51:44:76, 1, 0, 5, 'TS0601') params: FOREIGN KEY constraint failed Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=36, profile_id=0, cluster_id=2, data=Serialized[b'5\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) [0xaab2:zdo] ZDO request ZDOCmd.Node_Desc_req: [0x0000] [0xaab2:zdo] No handler for ZDO request:ZDOCmd.Node_Desc_req([0x0000]) Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.ALL_ROUTERS_AND_COORDINATOR: 65532>), dst_ep=0, source_route=None, extended_timeout=False, tsn=39, profile_id=0, cluster_id=54, data=Serialized[b'6\xb4\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-30) [0xaab2:zdo] ZDO request ZDOCmd.Mgmt_Permit_Joining_req: [180, <Bool.true: 1>] [0x7B67:1:0x0b04]: failed to get attributes '['active_power', 'rms_current', 'rms_voltage']' on 'electrical_measurement' cluster: Failed to deliver message: <EmberStatus.DELIVERY_FAILED: 102> Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=40, profile_id=260, cluster_id=61184, data=Serialized[b'\tp\x11\x00;@'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-28) [0xAAB2:1:0xef00] Received ZCL frame: b'\tp\x11\x00;@' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=112, command_id=17, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 17 b'\x00;@' [0xAAB2:1:0xef00] Received command 0x11 (TSN 112): b'\x00;@' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x11: b'\x00;@' [0x6306](01MINIZB): Device seen - marking the device available and resetting counter [0x6306](01MINIZB): Update device availability - device available: True - new availability: True - changed: False Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=41, profile_id=260, cluster_id=61184, data=Serialized[b'\tp\x11\x00;@'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-28) [0xAAB2:1:0xef00] Received ZCL frame: b'\tp\x11\x00;@' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=112, command_id=17, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 17 b'\x00;@' [0xAAB2:1:0xef00] Received command 0x11 (TSN 112): b'\x00;@' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x11: b'\x00;@' [0xDD77](TRADFRI Signal Repeater): last_seen is 15602398.541951656 seconds ago and ping attempts have been exhausted, marking the device unavailable [0xDD77](TRADFRI Signal Repeater): Update device availability - device available: False - new availability: False - changed: False Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=42, profile_id=260, cluster_id=61184, data=Serialized[b'\tp\x11\x00;@'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-28) [0xAAB2:1:0xef00] Received ZCL frame: b'\tp\x11\x00;@' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=112, command_id=17, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 17 b'\x00;@' [0xAAB2:1:0xef00] Received command 0x11 (TSN 112): b'\x00;@' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x11: b'\x00;@' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=43, profile_id=260, cluster_id=0, data=Serialized[b'\x08q\n\x01\x00 C\xe2\xff 1\xe4\xff \x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0x0000] Received ZCL frame: b'\x08q\n\x01\x00 C\xe2\xff 1\xe4\xff \x00' [0xAAB2:1:0x0000] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=113, command_id=10, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x0000] Decoded ZCL frame: Basic:Report_Attributes(attribute_reports=[Attribute(attrid=0x0001, value=TypeValue(type=uint8_t, value=67)), Attribute(attrid=0xFFE2, value=TypeValue(type=uint8_t, value=49)), Attribute(attrid=0xFFE4, value=TypeValue(type=uint8_t, value=0))]) [0xAAB2:1:0x0000] Received command 0x0A (TSN 113): Report_Attributes(attribute_reports=[Attribute(attrid=0x0001, value=TypeValue(type=uint8_t, value=67)), Attribute(attrid=0xFFE2, value=TypeValue(type=uint8_t, value=49)), Attribute(attrid=0xFFE4, value=TypeValue(type=uint8_t, value=0))]) [0xAAB2:1:0x0000] Attribute report received: app_version=67, 0xFFE2=49, 0xFFE4=0 [0xAAB2:1:0x0000] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Client_to_Server: 1>, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=113, command_id=<GeneralCommand.Default_Response: 11>, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x0000] Sending reply: Default_Response(command_id=10, status=<Status.SUCCESS: 0>) Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=44, profile_id=260, cluster_id=10, data=Serialized[b'\x00r\x00\x07\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0x000a] Received ZCL frame: b'\x00r\x00\x07\x00' [0xAAB2:1:0x000a] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, direction=<Direction.Server_to_Client: 0>, disable_default_response=0, reserved=0, *is_cluster=False, *is_general=True, *is_reply=False), tsn=114, command_id=0, *direction=<Direction.Server_to_Client: 0>, *is_reply=False) [0xAAB2:1:0x000a] Decoded ZCL frame: Time:Read_Attributes(attribute_ids=[7]) [0xAAB2:1:0x000a] Received command 0x00 (TSN 114): Read_Attributes(attribute_ids=[7]) [0xAAB2:1:0x000a] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Client_to_Server: 1>, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=114, command_id=<GeneralCommand.Read_Attributes_rsp: 1>, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x000a] Sending reply: Read_Attributes_rsp(status_records=[ReadAttributeRecord(attrid=0x0007, status=<Status.SUCCESS: 0>, value=TypeValue(type=LocalTime, value=719406532))]) Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=45, profile_id=260, cluster_id=0, data=Serialized[b'\x08s\n\xdf\xffB\x0f\xb5E\xe1*f\xb5E\xe1*\x13\xb6E\xe1*\x12'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0x0000] Received ZCL frame: b'\x08s\n\xdf\xffB\x0f\xb5E\xe1*f\xb5E\xe1*\x13\xb6E\xe1*\x12' [0xAAB2:1:0x0000] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=115, command_id=10, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x0000] Decoded ZCL frame: Basic:Report_Attributes(attribute_reports=[Attribute(attrid=0xFFDF, value=TypeValue(type=CharacterString, value='�E�*f�E�*\x13�E�*\x12'))]) [0xAAB2:1:0x0000] Received command 0x0A (TSN 115): Report_Attributes(attribute_reports=[Attribute(attrid=0xFFDF, value=TypeValue(type=CharacterString, value='�E�*f�E�*\x13�E�*\x12'))]) [0xAAB2:1:0x0000] Attribute report received: 0xFFDF='�E�*f�E�*\x13�E�*\x12' [0xAAB2:1:0x0000] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Client_to_Server: 1>, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=115, command_id=<GeneralCommand.Default_Response: 11>, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0x0000] Sending reply: Default_Response(command_id=10, status=<Status.SUCCESS: 0>) [0xC582](SYMFONISK Sound Controller): last_seen is 8058877.430959702 seconds ago and ping attempts have been exhausted, marking the device unavailable [0xC582](SYMFONISK Sound Controller): Update device availability - device available: False - new availability: False - changed: False Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=46, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-28) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=47, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=48, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=49, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=50, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=51, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=52, profile_id=260, cluster_id=61184, data=Serialized[b'\tt\x02\x00>\x01\x04\x00\x01\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tt\x02\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=116, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] Received command 0x02 (TSN 116): b'\x00>\x01\x04\x00\x01\x01' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00>\x01\x04\x00\x01\x01' Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xAAB2), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=53, profile_id=260, cluster_id=61184, data=Serialized[b'\tu\x02\x00?\x0e\x04\x00\x01\x02'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=255, rssi=-27) [0xAAB2:1:0xef00] Received ZCL frame: b'\tu\x02\x00?\x0e\x04\x00\x01\x02' [0xAAB2:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Client_to_Server: 1>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False, *is_reply=True), tsn=117, command_id=2, *direction=<Direction.Client_to_Server: 1>, *is_reply=True) [0xAAB2:1:0xef00] Unknown cluster command 2 b'\x00?\x0e\x04\x00\x01\x02' [0xAAB2:1:0xef00] Received command 0x02 (TSN 117): b'\x00?\x0e\x04\x00\x01\x02' [0xAAB2:1:0xef00] No explicit handler for cluster command 0x02: b'\x00?\x0e\x04\x00\x01\x02' ``` </details>

MarcellusWallace · January 19, 2024, 1:59pm

Heb je ook de identifier (model info) van het device toegevoegd aan het bestand?
(“_TZE200_rccxox8p”, “TS0601”), .

Als je daarna bij Zigbee info op het pijltje naar beneden klikt voor meer info dan kun je zien of de ‘custom quirk’ daadwerkelijk actief is.

musicscore · January 19, 2024, 2:45pm

Ik heb de device naam inderdaad toegevoegd:

(“_TZE200_rccxox8p”, “TS0601”),

De ‘Quirk’ wordt blijkbaar geladen.
Zonder zie ik namelijk ook de rook melding niet :

Het vreemde is dat wanneer ik een reconfig doe, het lijk alsof de battery wel herkend wordt.

MarcellusWallace · January 19, 2024, 3:11pm

wellicht even verwijderen, ZHA reloaden (of heel HA) en dan weer toevoegen.
Ik heb ook wel eens iets vreemds gehad daarmee.

Maar is het verder wel hetzelfde device als waar ik de thread mee ben begonnen?

musicscore · January 19, 2024, 3:38pm

Oeps, Nee het is deze : TS0601_TZE200_rccxox8p

Rookmelder Sensor Smart Home Alarm Fire Wifi/Zigbee Smart Rookmelder Fire Bescherming Voor Amazon Alexa Google Assistent (aliexpress.com)

Het preciese type staat in de afbeelding over het device in het home assistant plaatje.
Misschien kent dit type wel geen battery aanduiding maar wel vreemd dat dit bij reconfigure dan wel op groen springt. De waarde wordt dus niet weergegeven.

MarcellusWallace · January 21, 2024, 5:08pm

volgens deze database zou deze gewoon standaard moeten werken met ZHA (tenminste, dat is mijn interpretatie van ‘confirmed working with ZHA’)
Tuya Photoelectric Smoke Detector TS0601 Zigbee compatibility (blakadder.com)

musicscore · January 22, 2024, 8:17am

MarcellusWallace

Bedankt voor je reactie.

Helaas is deze detector niet geverifieerd voor ZHA

If the device is following Zigbee standards it is possible it will work with other gateway solutions, it is just not confirmed as working yet!

Ben aan het denken over te stappen op Zigbee2MQTT maar moet dan 33 devices omzetten. Als ik die stap doe bestel ik een tweede Sonoff stick zodat ik gefaseerd kan overstappen. Hoop dat deze melder dan wel correct werkt.

MarcellusWallace · January 22, 2024, 9:04am

Het heeft wel een andere identifier, dus probeer de quirk te zoeken en jouw id daar aan toevoegen. Mijn inziens zou het dan gewoon moeten functioneren.

Kippy74 · March 12, 2024, 12:29pm

I also have this one: TS0601_TZE200_rccxox8p

Anyone has a solution regarding battery state yet?

newmail · April 10, 2024, 9:53am

Hello, I also installed some of those, so I wonder if you now also run into this recall notification and if you may know the reason for it: Ebay recall of "Tuya Wifi/Zigbee Smart Fire Smoke Detector Alarm Fire 80db Sound Alarm Sensor"