I cant get the Input_select to work. How exactly should it work? It should start zoned cleanup right after you select the room or you need to select the room and press start? i dont quite get it. I have the zones defined and I ask Google Assistant throught IFTTT to do it.
EDIT: Disregard previous. My automation was switched off
It worked for me during a week but now input_select doesn’t react.
I’m in the same problem as @pitoganzado . Anyone know how to make it work?
My HA version is 0.91.4
yes i am using google assistant as custom component, so google assistant is aware of my zones
i dont need to expose them as scenes/scripts or whatever, its working in native mode
I want to be able to say “Hey google, vacuum the kitchen 2 times” and then send 2 repeats to it. Or Vacuum the entrance 3 times and send 3 repeats
There is 2 ways I can do this
Either use the send command function within the vacuum and call the service clean zone, this should be possible as others have been able to do it but im struggling with this one.
Or create scripts for each of the repeats and then call them from IFTTT, 1 script for each repeat. A little bit more code but this im pretty sure I can do today and most likely I will not send more then 1 repeat to most of the zones.
Sure not much automation since i mainly activate it with the google home, and im not done setup the room locations since that it pretty hard.
But here are the text for lovelace: https://www.hastebin.com/ticaxeyali.bash
scripts is indeed easy, but IFTTT should also work, just make an applet with 2 ingredients, the name and the repeats as variable
disadvantage, you need to tell the exact phrase you setup in ifttt
if you use the native google component, like other stuff native exposed in google, you can have a conversation with google assistant to tell to clean the kitchen in different ways
but only repeats is not supported
download HA from github, extract from the component dir the “google_assistant” component, place the whole directory in your custom_components directory
then replace the trait.py file with the one from mu link and change coordinates in that file
restart HA; sync your devices, and you are good to go
Okej i a new to this… i dont rely know what to next.
I got the tokes, from the ios divice, and add it to config,ymal
but i have no ide what to next. i cant see it in my HA, i think i need to add new device some how.