Z-Wave Fan Control

Feature Requests
31

Here’s my log for that node (30). Still doesn’t show as an entity.

    2017-06-10 17:30:58.270 Detail,
    2017-06-10 17:30:58.270 Info, Node030, Sending (Query) message (Callback ID=0x48, Expected Reply=0x04) - SwitchAllCmd_Get (Node=30): 0x01, 0x09, 0x00, 0x13, 0x1e, 0x02, 0x27, 0x02, 0x25, 0x48, 0xb1
    2017-06-10 17:30:58.278 Detail, Node030,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
    2017-06-10 17:30:58.279 Detail, Node030,   ZW_SEND_DATA delivered to Z-Wave stack
    2017-06-10 17:30:58.342 Detail, Node030,   Received: 0x01, 0x07, 0x00, 0x13, 0x48, 0x00, 0x00, 0x07, 0xa4
    2017-06-10 17:30:58.343 Detail, Node030,   ZW_SEND_DATA Request with callback ID 0x48 received (expected 0x48)
    2017-06-10 17:30:58.343 Info, Node030, Request RTT 72 Average Request RTT 52
    2017-06-10 17:30:58.343 Detail,   Expected callbackId was received
    2017-06-10 17:30:58.354 Detail, Node030,   Received: 0x01, 0x09, 0x00, 0x04, 0x00, 0x1e, 0x03, 0x27, 0x03, 0xff, 0x34
    2017-06-10 17:30:58.354 Detail,
    2017-06-10 17:30:58.354 Info, Node030, Response RTT 83 Average Response RTT 67
    2017-06-10 17:30:58.354 Detail, Node030, Initial read of value
    2017-06-10 17:30:58.355 Info, Node030, Received SwitchAll report from node 30: On and Off Enabled
    2017-06-10 17:30:58.355 Detail, Node030,   Expected reply and command class was received
    2017-06-10 17:30:58.355 Detail, Node030,   Message transaction complete
    2017-06-10 17:30:58.355 Detail,
    2017-06-10 17:30:58.355 Detail, Node030, Removing current message
    2017-06-10 17:30:58.355 Detail, Node030, Notification: ValueChanged
    2017-06-10 17:30:58.366 Detail,
    2017-06-10 17:30:58.366 Info, Node030, Sending (Query) message (Callback ID=0x49, Expected Reply=0x04) - PowerlevelCmd_Get (Node=30): 0x01, 0x09, 0x00, 0x13, 0x1e, 0x02, 0x73, 0x02, 0x25, 0x49, 0xe4
    2017-06-10 17:30:58.375 Detail, Node030,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
    2017-06-10 17:30:58.375 Detail, Node030,   ZW_SEND_DATA delivered to Z-Wave stack
    2017-06-10 17:30:58.391 Detail, Node030,   Received: 0x01, 0x07, 0x00, 0x13, 0x49, 0x00, 0x00, 0x02, 0xa0
    2017-06-10 17:30:58.392 Detail, Node030,   ZW_SEND_DATA Request with callback ID 0x49 received (expected 0x49)
    2017-06-10 17:30:58.392 Info, Node030, Request RTT 25 Average Request RTT 38
    2017-06-10 17:30:58.392 Detail,   Expected callbackId was received
    2017-06-10 17:30:58.404 Detail, Node030,   Received: 0x01, 0x0a, 0x00, 0x04, 0x00, 0x1e, 0x04, 0x73, 0x03, 0x00, 0x00, 0x9b
    2017-06-10 17:30:58.404 Detail,
    2017-06-10 17:30:58.404 Info, Node030, Response RTT 37 Average Response RTT 52
    2017-06-10 17:30:58.404 Info, Node030, Received a PowerLevel report: PowerLevel=Normal, Timeout=0
    2017-06-10 17:30:58.404 Detail, Node030, Initial read of value
    2017-06-10 17:30:58.404 Detail, Node030, Initial read of value
    2017-06-10 17:30:58.404 Detail, Node030,   Expected reply and command class was received
    2017-06-10 17:30:58.404 Detail, Node030,   Message transaction complete
    2017-06-10 17:30:58.405 Detail,
    2017-06-10 17:30:58.405 Detail, Node030, Removing current message
    2017-06-10 17:30:58.405 Detail, Node030, Notification: ValueChanged
    2017-06-10 17:30:58.416 Detail, Node030, Notification: ValueChanged
    2017-06-10 17:30:58.426 Detail, Node030, Query Stage Complete (Session)
    2017-06-10 17:30:58.426 Detail, Node030, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Dynamic live=1
    2017-06-10 17:30:58.426 Detail, Node030, QueryStage_Dynamic
    2017-06-10 17:30:58.426 Detail, Node030, Queuing (Send) SwitchMultilevelCmd_Get (Node=30): 0x01, 0x09, 0x00, 0x13, 0x1e, 0x02, 0x26, 0x02, 0x25, 0x4c, 0xb4
    2017-06-10 17:30:58.426 Detail, Node030, Queuing (Query) Query Stage Complete (Dynamic)
    2017-06-10 17:30:58.427 Detail,
    2017-06-10 17:30:58.427 Info, Node030, Sending (Send) message (Callback ID=0x4c, Expected Reply=0x04) - SwitchMultilevelCmd_Get (Node=30): 0x01, 0x09, 0x00, 0x13, 0x1e, 0x02, 0x26, 0x02, 0x25, 0x4c, 0xb4
    2017-06-10 17:30:58.435 Detail, Node030,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
    2017-06-10 17:30:58.435 Detail, Node030,   ZW_SEND_DATA delivered to Z-Wave stack
    2017-06-10 17:30:58.452 Detail, Node030,   Received: 0x01, 0x07, 0x00, 0x13, 0x4c, 0x00, 0x00, 0x02, 0xa5
    2017-06-10 17:30:58.452 Detail, Node030,   ZW_SEND_DATA Request with callback ID 0x4c received (expected 0x4c)
    2017-06-10 17:30:58.452 Info, Node030, Request RTT 25 Average Request RTT 31
    2017-06-10 17:30:58.453 Detail,   Expected callbackId was received
    2017-06-10 17:30:58.460 Detail, Node030,   Received: 0x01, 0x09, 0x00, 0x04, 0x00, 0x1e, 0x03, 0x26, 0x03, 0x19, 0xd3
    2017-06-10 17:30:58.460 Detail,
    2017-06-10 17:30:58.460 Info, Node030, Response RTT 33 Average Response RTT 42
    2017-06-10 17:30:58.460 Info, Node030, Received SwitchMultiLevel report: level=25
    2017-06-10 17:30:58.460 Detail, Node030, Initial read of value
    2017-06-10 17:30:58.460 Detail, Node030,   Expected reply and command class was received
    2017-06-10 17:30:58.461 Detail, Node030,   Message transaction complete
    2017-06-10 17:30:58.461 Detail,
    2017-06-10 17:30:58.461 Detail, Node030, Removing current message
    2017-06-10 17:30:58.461 Detail, Node030, Notification: ValueChanged
32

No entity under drop down

33

Here’s a little more. This is cut and paste from openzwave github in the manufacturer_specific.xml.

It isn’t in there. I’ve tried a few variations on adding it with no luck at all so far. In my mind it just isn’t supported yet it looks like.

<Manufacturer id="0063" name="GE">
	<Product type="4450" id="3030" name="45602 Lamp Dimmer Module" config="ge/dimmer_module.xml"/>
	<Product type="4457" id="3230" name="45606 2-Way Dimmer Switch" config="ge/dimmer.xml"/>
	<Product type="4944" id="3031" name="12724 3-Way Dimmer Switch" config="ge/12724-dimmer.xml"/>
	<Product type="4944" id="3033" name="12729 3-Way Dimmer Switch" config="ge/12724-dimmer.xml"/>
	<Product type="4944" id="3034" name="12730 Fan Control Switch" config="ge/12724-dimmer.xml"/>
	<Product type="4944" id="3038" name="14294 In-Wall Smart Dimmer" config="ge/14294-dimmer.xml"/>
	<Product type="494d" id="3034" name="26933 Smart Motion Dimmer" config="ge/26933-motion-dimmer.xml"/>
	<Product type="4952" id="3036" name="14291 In-Wall Smart Switch" config="ge/14291-switch.xml"/>
	<Product type="5250" id="3030" name="45603 Plugin Appliance Module"/>
	<Product type="5250" id="3130" name="45604 Outdoor Module"/>
	<Product type="4f50" id="3031" name="12720 Outdoor Smart Switch"/>
	<Product type="5252" id="3530" name="45605 Duplex Receptacle"/>
	<Product type="5257" id="3533" name="45609 On/Off Relay Switch" config="ge/relay.xml"/>
	<Product type="4457" id="3033" name="45613 3-Way Dimmer Switch" config="ge/dimmer.xml"/>
	<Product type="4952" id="3031" name="12721 Lighting Control Duplex Receptacle" config="ge/receptacle.xml"/>
	<Product type="4952" id="3032" name="12722 On/Off Relay Switch" config="ge/relay.xml"/>
	<Product type="4952" id="3033" name="12727 In-Wall Smart Switch (Toggle)"/>
	<Product type="4953" id="3032" name="32563 Hinge Pin Smart Door Sensor" config="ge/hinge-pin.xml"/>
34

In my limited experience with this I have found just editing the “Manufacturer_specific.xml” to add the line

'<Product type="4944" id="3131" name="Fan Control Switch" config="ge/12724-dimmer.xml"/>'

Should get you the basic function. I just copied the line for the other fan entry which should be good enough till they come out with the updated profile if anything has changed.

35

Thanks…I had already tried that and a couple other variants of that and the problem persists that no entity is created. Other than that the switch shows up under zwave like it’s ready to roll . Just no entity ever gets created.

36

Editing that file won’t make the device show up as an entity - it will just give it a better name than “unknown” and maybe some extra functions/labels.

The device should show up under http://hass_ip:port/dev-state if it’s paired; usually after a restart of HASS or two.

37

What I have found is adding to the manufacture xml and then stopping HA and deleting the z-wave config file in the .homeassistant folder. Then restart HA and it adds from the new xml. You do need to go back and rename the nodes if you did any customizing but it has worked for me twice now to do it this way. If you have a better way I’m all ears.

38

Yep, deleting zwcfg*xml would be my next suggestion.

39

Just deleted and rebooted twice. No entity ever gets created. The zwave device gets named and looks ready, looks like every other GE switch I have but never an entity.

40

It should look like a dimmer not a switch. Once that is the case just follow the workaround created with .46 of HA

41

Even after the addition to manufacturer_specific.xml it only presents itself as:

zwave.ge_unknown_type4944_id3131_30

Shouldn’t the name change when I alter the xml file?

The switch says it is ready. I’m running 46.0 HA. My 12730 switch works fine.

This guy just will not make an entity no matter what you do. I can rename it in OZW or in the HA config.

averageRequestRTT: 73
capabilities: routing,listening,beaming
product_name: Unknown: type=4944, id=3131
receivedCnt: 23
node_name: GE Unknown: type=4944, id=3131
neighbors: 1,2,3,4,5,6,8,23,25,26,29
sentCnt: 17
lastResponseRTT: 103
sentTS: 2017-06-12 20:23:19:772 
receivedTS: 2017-06-12 20:23:19:916 
query_stage: Complete
receivedDups: 8
is_awake: true
friendly_name: GE Unknown: type=4944, id=3131
manufacturer_name: GE
sentFailed: 0
retries: 0
node_id: 30
lastRequestRTT: 79
receivedUnsolicited: 7
is_ready: true
averageResponseRTT: 97
is_failed: false
is_zwave_plus: true
is_info_received: true
max_baud_rate: 40000
42

Make sure you’ve stopped Home Assistant before you change/delete zwcfg_*.xml, since Home Assistant will write the file from memory when it closes.

43

Any thoughts on how to ensure the input_select’s stay in sync with the fan operation if manually switched? I was thinking about a automation that on the fan.xxxx state change would re-sync the input_select.

But maybe a more elegant way?

44

I finally did the stop/delete thing then got it to take the rename (GE 14287 Fan Switch)

zwave.ge_14287_fan_switch_30

However there are still no lights, switches, dimmer, or fan entities. Something with this switch.

45

Man, I’m tempted to order one just to figure out what’s going on here.

46

There’s another guy/thread here somewhere so I know it isn’t just me fouling this up. :slight_smile:

It appears as a zwave device fine and if you go line by line compared to every other switch I have it looks like it’s ready to roll. I have no idea at all how an entity gets generated so I think I’ve exhausted my abilities here.

47

Just for a minor update I built up a new Pi with Home Assistant and I have another Aeotech Zwave stick which I reset. Fresh, clean install and while the zwave device again gets created no entity is created. Same thing on a new install.

48

I have one of these too and updated my zwave manufacturer files this afternoon. That didn’t help either. open Zwave doesn’t know what it is.

49

Just setup a fresh install of HA with this GE switch, I have the same problem. HA doesn’t show any controls for it.

Edit: I found a solution here and it worked for me: GE Fan Switch 14287

50

Check this out