Hi All! Hopefully someone can help me get to the bottom of what is going on here. I have the Aotec Z-Stick passed through by Unraid and it looks like my VM can see it just fine. For whatever reason though the network just won’t start. Am I overlooking something obvious? I have reset the Z-Stick to …

I’m no unraid expert but have you tried changing the USB to 2.0 instead of 3.0?

That seems to have gotten me a little further but I’m still timing out: 2020-10-20 19:39:03.633 Always, OpenZwave Version 1.4.3469 Starting Up 2020-10-20 19:39:09.550 Info, Setting Up Provided Network Key for Secure Communications 2020-10-20 19:39:09.551 Info, mgr, Added driver for controller /…

Looks like your passthru for the USB is dropping out. I think someone had solved this issue on the forums here, try searching.

Ended up getting it working by swapping the Z-Stick from the rear USB 3.0 ports on my motherboards to the front panel USB 2.0 ports on my case.

Ah similar to the rPi4 and Aeotec issue, likely ALL USB 3.0 ports are going to have this issue.

Z-Wave network not starting on HassIO VM on Unraid

Configuration Z-Wave

RickKramer (Rick Kramer - Jansen) October 21, 2020, 12:42pm 5

Is another VM/service/something using the device at the same time and thus locking it perhaps? Try a different USB port?

Maybe anything in this thread can help you figure this out?