edit: after resetting also bridge and moving to another position now it’s working. so it was matter of radio communication (bridge was near to a 2.4 ghz wifi access point)
-------------------------------- old message below ----------
hi, thanks for reply… i just missed it ^^’
i’ve already created automation after importing OP’s blueprint.
see device’s related automation:
but it’s not triggered when i press buttons.
I can see Zigbee logs on ZHA “show logs” when i delete/add again remote device
Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x78E5), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.Group: 1>, address=0x0000), dst_ep=255, source_route=None, extended_timeout=False, tsn=55, profile_id=260, cluster_id=8, data=Serialized[b'\x01\x02\x02\x013\n\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=140, rssi=-65)
Received a packet: ZigbeePacket(src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x78E5), src_ep=1, dst=AddrModeAddress(addr_mode=<AddrMode.Group: 1>, address=0x0000), dst_ep=255, source_route=None, extended_timeout=False, tsn=55, profile_id=260, cluster_id=8, data=Serialized[b'\x01\x02\x02\x013\n\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=140, rssi=-65)
[0x78E5:1:0x0008] Received ZCL frame: b'\x01\x02\x02\x013\n\x00'
[0x78E5:1:0x0008] Received ZCL frame: b'\x01\x02\x02\x013\n\x00'
[0x78E5:1:0x0008] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Server_to_Client: 0>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=2, command_id=2, *direction=<Direction.Server_to_Client: 0>)
[0x78E5:1:0x0008] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, direction=<Direction.Server_to_Client: 0>, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=2, command_id=2, *direction=<Direction.Server_to_Client: 0>)
[0x78E5:1:0x0008] Decoded ZCL frame: LevelControl:step(step_mode=<StepMode.Down: 1>, step_size=51, transition_time=10, options_mask=None, options_override=None)
[0x78E5:1:0x0008] Decoded ZCL frame: LevelControl:step(step_mode=<StepMode.Down: 1>, step_size=51, transition_time=10, options_mask=None, options_override=None)
[0x78E5:1:0x0008] Received command 0x02 (TSN 2): step(step_mode=<StepMode.Down: 1>, step_size=51, transition_time=10, options_mask=None, options_override=None)
[0x78E5:1:0x0008] Received command 0x02 (TSN 2): step(step_mode=<StepMode.Down: 1>, step_size=51, transition_time=10, options_mask=None, options_override=None)
[0x78E5:1:0x0008] No explicit handler for cluster command 0x02: step(step_mode=<StepMode.Down: 1>, step_size=51, transition_time=10, options_mask=None, options_override=None)
[0x78E5:1:0x0008] No explicit handler for cluster command 0x02: step(step_mode=<StepMode.Down: 1>, step_size=51, transition_time=10, options_mask=None, options_override=None)
maybe something wrong with ZHA integration and/or Zigbee bridge, but other TH sensors seems working fine