You can’t.
You’ll need to pay child support until it’s 18.
Sorry, not a useful comment, but I couldn’t resist.
Does it show up in .storage\zha.storage?
It looks like something that got stuck in core.device_registry for some reason.
1 Like
It was in my code.device_registry. Cleared it out there and looks like I’m good to go. Thanks for the kick in the right direction
I am using xbee s2b with latest coordinator software on a ubuntu based docker container.
I successfully paired a STS-IRM-250 motion sensor and a Xiaomi Aqara vibration sensor, but then, I had to swap my xbee s2b coordinator board to one that supported a bigger antenna and I have not been able to get anything to pair back to it.
I deleted the entity, I cleared all the references to zha in the .storage folder as well as the zigbee.db file. As far as I can tell, I’ve reset everything to a state where there is no reference to any zha anywhere. The motion sensor pairs with my smarthings hub but I want to use it through HA.
I have the following specific questions:
-Is there any information that somehow got saved in the homeassistant.db file that I can remove from the database that could be the problem?
-I am confused about the 'zha.permit" service. Is it necessary to allow fo devices to connect to the coordinator, or is it essentially the same as using the Add Device button in the zha integration UI?
-I get the following warning in the log. Is it normal or could it point to what the problem is?
Not saving uninitialized 00:13:a2:00:40:a7:8a:4b/0x0000 device: Status.NEW
-The log from zigpy seems fairly terse. Can I get it to be more verbose?
-Can I run the zigpy and zigpy-xbee python in a shell rather than through HA to see if I can get more info?
Thoughts? Is there something I’m missing?
zha.permit is the same as “Add Device” button from zha config panel.
Ignore that error for now. it’s harmless it would be fixed. eventually.
Enable debug logging in homeassistant-core for homeassitant.components.zha, zigpy_xbee.zigbee.application and zigpy_xbee.api modules
Make sure the device is reset. Enable debug logging and see if there’s any traffic. And FYI S2B xbees do not support groups, so you won’t be able to receive updates from certain devices which send updates using multicast
Great! Thanks for the help. The logging pointed me to the fact that some of the zigbee commands were failing. I re-flashed the zigbee coordinator API in XCTU, making sure to turn off “Force the module to maintain its current configuration”, and it was able to pair, so it was a problem with how I had flashed the firmware in XCTU. The STS-IRM-250 worked right away and the Xiaomi Aqara vibration sensor took a bunch of button presses on the device to pair.
Anyone running the aqara zigbee lightbulb? I connected one a while back, but it seemed to come up as a thermostat or something, with a field showing tempterature (instaed of colour temperature). Has this device been integrated?
This is the one i’m talking about here - https://github.com/Koenkk/zigbee2mqtt/issues/621
and here - Aqara Zigbee LED Bulb E27
Yesterday I’ve migrated from Z2MQTT to ZHA. Almost all of the devices are now in zha, but the one I’m having issues with is the aqara ,QBKG04LM, single switch without neutral.
It comes up in HA with 4 sensors, 2 lightbulbs and 3 switches. One of the lightbulbs does listen to the state of the switch, but I can’t send an on or off signal to it. I’ve tried repairing it multiple times now and comes up everytime the same.Also there aren’t any zha_events showing up while pressing the button.
In the pastebin the log of the pairingprocess. Perhaps someone could point me in the right direction?
Did you ever get anywhere with using this remote? I’ve just bought a couple and can only use the I / O buttons currently which is a shame as it has the potential to be really useful.
No I sold mine in the end
Hey, so I’m a bit of a newb at this stuff, but I’m trying to get up to speed quickly.
Got a couple new Ikea Tradfri wireless dimmer on/off buttons (E1743) and when I added them to ZHA all that’s showing up is the battery status, which is not useful. In the logs I get “No handler for cluster command 0” (also, 1, 5, 7 depending on which button, or long/short press)
Through ZHA I was able to bind the switch to another zigbee device (a plug) and it was working fine. I’m just missing a step where I can get the button presses to be sent into HA as events. Right now they are pretty useless as I want to ultimately control zwave and other devices with them.
Any help on this? (below is the output as I added one of the devices to ZHA
[0x0000:zdo] ZDO request 0x0036: [60, <Bool.false: 0>]
[0x9d79:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=195 command_id=Command.Report_Attributes>
[0x9d79:1:0x0006] ZCL request 0x000a: [[<Attribute attrid=0 value=<TypeValue type=Bool, value=Bool.false>>]]
[0x9d79:1:0x0006] Attribute report received: on_off=Bool.false
Device 0x4195 (14:b4:57:ff:fe:7b:a5:30) joined the network
[0x4195] Requesting 'Node Descriptor'
[0x4195] Extending timeout for 0x9a request
Device 0x7a4b (14:b4:57:ff:fe:7b:a5:30) joined the network
Device 14:b4:57:ff:fe:7b:a5:30 changed id (0x4195 => 0x7a4b)
Canceling old initialize call
[0x7a4b] Requesting Node Descriptor failed:
[0x7a4b] Discovering endpoints
[0x7a4b] Extending timeout for 0x9c request
[0x7a4b] Requesting 'Node Descriptor'
[0x7a4b] Extending timeout for 0x9e request
Device 0x7a4b (14:b4:57:ff:fe:7b:a5:30) joined the network
Skip initialization for existing device 14:b4:57:ff:fe:7b:a5:30
[0x7a4b:zdo] ZDO request 0x0013: [0x7a4b, 14:b4:57:ff:fe:7b:a5:30, 128]
[0x7a4b] Discovered endpoints: [1]
[0x7a4b:1] Discovering endpoint information
[0x7a4b] Extending timeout for 0xa0 request
[0x7a4b] Node Descriptor: <Optional byte1=2 byte2=64 mac_capability_flags=128 manufacturer_code=4476 maximum_buffer_size=82 maximum_incoming_transfer_size=82 server_mask=11264 maximum_outgoing_transfer_size=82 descriptor_capability_field=0>
[0x7a4b] Discovering endpoints
[0x7a4b] Extending timeout for 0xa2 request
[0x7a4b:1] Discovered endpoint information: <SimpleDescriptor endpoint=1 profile=260 device_type=2080 device_version=1 input_clusters=[0, 1, 3, 9, 32, 4096, 64636] output_clusters=[3, 4, 6, 8, 25, 258, 4096]>
[0x7a4b] Extending timeout for 0xa4 request
[0x7a4b] Discovered endpoints: [1]
[0x7a4b:1] Discovering endpoint information
[0x7a4b] Extending timeout for 0xa6 request
Ignoring message (b'18a401040000420e494b4541206f662053776564656e050000421554524144465249206f6e2f6f666620737769746368') on cluster 0: unknown endpoint or cluster id: 'No cluster ID 0x0000 on (14:b4:57:ff:fe:7b:a5:30, 1)'
[0x7a4b:1] Discovered endpoint information: <SimpleDescriptor endpoint=1 profile=260 device_type=2080 device_version=1 input_clusters=[0, 1, 3, 9, 32, 4096, 64636] output_clusters=[3, 4, 6, 8, 25, 258, 4096]>
[0x7a4b] Extending timeout for 0xa8 request
[0x7a4b:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=0 command_id=1>
[0x7a4b:1:0x0006] ZCL request 0x0001: []
[0x7a4b:1:0x0006] No handler for cluster command 1
[0x7a4b:1:0x0000] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=168 command_id=Command.Read_Attributes_rsp>
[0x7a4b:1] Manufacturer: IKEA of Sweden
[0x7a4b:1] Model: TRADFRI on/off switch
Checking quirks for IKEA of Sweden TRADFRI on/off switch (14:b4:57:ff:fe:7b:a5:30)
Considering <class 'zhaquirks.ikea.twobtnremote.IkeaTradfriRemote2Btn'>
Found custom device replacement for 14:b4:57:ff:fe:7b:a5:30: <class 'zhaquirks.ikea.twobtnremote.IkeaTradfriRemote2Btn'>
device - 0x7a4b:14:b4:57:ff:fe:7b:a5:30 entering async_device_initialized - is_new_join: True
device - 0x7a4b:14:b4:57:ff:fe:7b:a5:30 has joined the ZHA zigbee network
[0x7a4b](TRADFRI on/off switch): started configuration
[0x7a4b:ZDO](TRADFRI on/off switch): channel: 'async_configure' stage succeeded
[0x7a4b] Extending timeout for 0xaa request
[0x7a4b] Extending timeout for 0xac request
[0x7a4b] Extending timeout for 0xae request
[0x7a4b:1:0x0000]: bound 'basic' cluster: Status.SUCCESS
[0x7a4b:1:0x0000]: finished channel configuration
[0x7a4b] Extending timeout for 0xb0 request
[0x7a4b:1:0x1000] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=174 command_id=65>
[0x7a4b:1:0x0001]: bound 'power' cluster: Status.SUCCESS
[0x7a4b] Extending timeout for 0xb2 request
[0x7a4b:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=2 command_id=0>
[0x7a4b:1:0x0006] ZCL request 0x0000: []
[0x7a4b:1:0x0006] No handler for cluster command 0
[0x7a4b:1:0x1000]: bound 'lightlink' cluster: None
[0x7a4b:1:0x1000]: finished channel configuration
[0x7a4b:1:0x1000]: channel: 'async_configure' stage succeeded
[0x7a4b] Extending timeout for 0xb4 request
[0x7a4b:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=4 command_id=1>
[0x7a4b:1:0x0006] ZCL request 0x0001: []
[0x7a4b:1:0x0006] No handler for cluster command 1
[0x7a4b:1:0x0000] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=176 command_id=Command.Read_Attributes_rsp>
[0x7a4b:1:0x0000]: initializing channel: from_cache: False
[0x7a4b:1:0x0000]: channel: 'async_configure' stage succeeded
[0x7a4b:1:0x0001] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=178 command_id=Command.Configure_Reporting_rsp>
[0x7a4b] Extending timeout for 0xb6 request
[0x7a4b:1:0x0001]: reporting 'battery_voltage' attr on 'power' cluster: 3600/10800/1: Result: '[[<ConfigureReportingResponseRecord status=Status.SUCCESS>]]'
[0x7a4b:1:0x0006]: bound 'on_off' cluster: Status.SUCCESS
[0x7a4b:1:0x0006]: finished channel configuration
[0x7a4b:1:0x0006]: channel: 'async_configure' stage succeeded
[0x7a4b] Extending timeout for 0xb8 request
[0x7a4b:1:0x0008]: bound 'level' cluster: Status.SUCCESS
[0x7a4b:1:0x0008]: finished channel configuration
[0x7a4b:1:0x0008]: channel: 'async_configure' stage succeeded
[0x7a4b:1:0x0001] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=184 command_id=Command.Configure_Reporting_rsp>
[0x7a4b:1:0x0001]: reporting 'battery_percentage_remaining' attr on 'power' cluster: 3600/10800/1: Result: '[[<ConfigureReportingResponseRecord status=Status.SUCCESS>]]'
[0x7a4b:1:0x0001]: finished channel configuration
[0x7a4b:1:0x0001]: channel: 'async_configure' stage succeeded
[0x7a4b](TRADFRI on/off switch): completed configuration
[0x7a4b](TRADFRI on/off switch): stored in registry: ZhaDeviceEntry(name='IKEA of Sweden TRADFRI on/off switch', ieee='14:b4:57:ff:fe:7b:a5:30', last_seen=1583550104.770326)
[0x7a4b](TRADFRI on/off switch): started initialization
[0x7a4b:ZDO](TRADFRI on/off switch): entry loaded from storage: ZhaDeviceEntry(name='IKEA of Sweden TRADFRI on/off switch', ieee='14:b4:57:ff:fe:7b:a5:30', last_seen=1583550104.770326)
[0x7a4b:ZDO](TRADFRI on/off switch): channel: 'async_initialize' stage succeeded
[0x7a4b] Extending timeout for 0xba request
[0x7a4b] Extending timeout for 0xbc request
[0x7a4b:1:0x1000]: initializing channel: from_cache: False
[0x7a4b:1:0x1000]: channel: 'async_initialize' stage succeeded
[0x7a4b:1:0x0006]: initializing channel: from_cache: False
[0x7a4b:1:0x0006]: channel: 'async_initialize' stage succeeded
[0x7a4b:1:0x0008]: initializing channel: from_cache: False
[0x7a4b:1:0x0008]: channel: 'async_initialize' stage succeeded
[0x7a4b:zdo] ZDO request 0x0036: [180, <Bool.true: 1>]
[0x7a4b:1:0x0003] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=7 command_id=1>
[0x7a4b:1:0x0003] ZCL request 0x0001: []
[0x7a4b:1:0x0003] No handler for cluster command 1
[0x7a4b:1:0x0000] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=186 command_id=Command.Read_Attributes_rsp>
[0x7a4b:1:0x0000]: initializing channel: from_cache: False
[0x7a4b:1:0x0000]: channel: 'async_initialize' stage succeeded
[0x7a4b:1:0x0001] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=188 command_id=Command.Read_Attributes_rsp>
[0x7a4b:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=8 command_id=0>
[0x7a4b:1:0x0006] ZCL request 0x0000: []
[0x7a4b:1:0x0006] No handler for cluster command 0
[0x7a4b] Extending timeout for 0xbe request
[0x7a4b:1:0x0001] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=190 command_id=Command.Read_Attributes_rsp>
[0x7a4b] Extending timeout for 0xc0 request
[0x7a4b:1:0x0001] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=192 command_id=Command.Read_Attributes_rsp>
[0x7a4b] Extending timeout for 0xc2 request
[0x7a4b:1:0x0008] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=9 command_id=1>
Data remains after deserializing ZCL frame
[0x7a4b:1:0x0008] ZCL request 0x0001: [1, 83]
[0x7a4b:1:0x0008] No handler for cluster command 1
[0x7a4b:1:0x0001] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=194 command_id=Command.Read_Attributes_rsp>
[0x7a4b:1:0x0001]: initializing channel: from_cache: False
[0x7a4b:1:0x0001]: channel: 'async_initialize' stage succeeded
[0x7a4b](TRADFRI on/off switch): power source: Battery or Unknown
[0x7a4b](TRADFRI on/off switch): completed initialization
[0x7a4b:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=14 command_id=0>
[0x7a4b:1:0x0006] ZCL request 0x0000: []
[0x7a4b:1:0x0006] No handler for cluster command 0
[0x7a4b] Extending timeout for 0xc4 request
[0x7a4b:1:0x0008] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=15 command_id=1>
Data remains after deserializing ZCL frame
[0x7a4b:1:0x0008] ZCL request 0x0001: [1, 83]
[0x7a4b:1:0x0008] No handler for cluster command 1
[0x7a4b:1:0x0008] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=16 command_id=7>
[0x7a4b:1:0x0008] ZCL request 0x0007: []
[0x7a4b:1:0x0008] No handler for cluster command 7
[0x7a4b:1:0x0000] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=196 command_id=Command.Read_Attributes_rsp>
[0x7a4b:1:0x0000] ZCL request 0x0001: [[<ReadAttributeRecord attrid=4 status=Status.SUCCESS value=IKEA of Sweden>]]
[0x7a4b:1:0x0008] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=17 command_id=5>
[0x7a4b:1:0x0008] ZCL request 0x0005: [0, 83]
[0x7a4b:1:0x0008] No handler for cluster command 5
[0x7a4b:1:0x0008] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=False> manufacturer=None tsn=18 command_id=7>
[0x7a4b:1:0x0008] ZCL request 0x0007: []
[0x7a4b:1:0x0008] No handler for cluster command 7
What HA core version?
Enable debug for homeassistant.core component and check for zha events. Or on dev page -> events, listen to zha_event
HA 0.106.5
It’s been fixed according to this: https://github.com/dmulcahey/zha-device-handlers/pull/292
Should be working soon! 
I’ve skimmed through the thread, but I haven’t seen much info on Philips Hue Sensors.
I have 11 Hue sonsors and I’ve just moved to ZHA from Deconz. My experience thus far has been terrible.
Are philips hue motion sensors supported? I’ve paired the sensors in ZHA to the Conbee II but they barely work.
how can you control a group of zigbee bulbs once youve created the group?
even without the manufacturer nothing happens bulbs are turning on or off.
In other words exactly what it was supposed to do
No you’ve taken part of my sentence they are doing nothing.
Has anyone tried ZHA with CC2531 yet?
I’ve added it successfully through integrations but it can’t find any lights/sensors.
Seems to be timing out and giving a webhooks error
Any ideas?
What kind of bulbs. I had my hue bulbs on zigbee, and they did in fact turn on/off with zigbee groups, but never reporting thier stateback, so HA did not show them as on/off. I was sitting in my office running the group commands thinking the lights were not doing anything,when in fact they were.