ZIGBEE2MQTT Crashing, Restarting, network failing

MJWMJW · August 18, 2023, 10:28am

I have the strangest of issues currently, and I really don’t know what to do next - your help is much appreciated.

Intermittently Home Assistant Supervisor Watchdog found addon Zigbee2MQTT is failed and restarts. There seems to be nothing around this time in zigbee2mqtt or supervisor logs to suggest why. This happens from 1-5 times per day.

I have currently a device which seems to drop from the network, re-pairing and it works again for some days. It has been the same device for several weeks. Prior it was a different device (same make and model aurora one light dimmer). I normally notice this happens once a day

Two times in the last weeks the whole zigbee network has totally failed - power cycle of HA also hosting Z2M and Mosquitto don’t help, changing the zigbee adapter (electrolama ZZH CC2652 with a Sonoff CC2652P), using or not using USB extensions makes no difference, only a full house power off an on seems to recover in this situation.

Z2M has the odd timeout error in logs to a few devices, but nothing that seems consitent.

Home Wifi is on channel 11. Neighbours is on 6. Zigbee is on 15. All software and firmware is latest versions.

Any clue, suggestions, ideas what to do?

Neil_Brownlee · August 18, 2023, 12:10pm

Is your stick on a USB extension cable to get it away from any interference (and also away from your Wi-Fi). I have a similar layout with 11 and 6 being used so I went for Zigbee channel 11 which is as far away from 6 as it can be.

Tamsy · August 18, 2023, 12:40pm

Have you tried a different USB port on your HA device? Could be a problem with the USB port used to connect the extension cable/coordinator into.

If HA is installed on Home Assistant Blue or an ODROID-N2+ failing USB ports are a known problem.

NathanCu · August 18, 2023, 12:49pm

Here’s what your situation says so far.

You have some kind of signal problem on that one device but it’s probably not this issue.

Sometimes the entire zigbee network dumps. (this is probably when Zigbee2MQTT crashes)

Does power OFF/ reset of only the HA box (and your coordinator) recover. (the power off seems significant here and points to your usb stick or usb bus hanging somehow, but the rest of the house should have no impact.)

We won’t be able to do much more than guess without your Z2M log. In debug mode.

MJWMJW · August 18, 2023, 5:03pm

Zigbee2mqtt is crashing much more than the whole network fail. Crash is typically at least daily. Full network fail is only rarely (twice in a couple of weeks).

Power off of the HA box (NUCi57ryh) does not solve the issue after a full network fail - only full house power down.

I can put Zigbee2mqtt in debug and see what happens. However I decided to also to start migrating to ZHA, as I really cannot think of anything else to do.

MJWMJW · August 18, 2023, 5:06pm

I did not try a different USB port. It is a NUC5i7RYH. However I actually just moved it, to run from a different port using the ZZH stick… and I put the Sonoff in the normal one so I can migrate from Z2M to ZHA more easily.

MJWMJW · August 18, 2023, 5:12pm

yes I have it on an extension… Also tried it without, with 3 different extensions also.

I did have originally on Zigbee 11, but some interferance from Tigo Solar optimisers caused some devices to reset (and then turn off or on as per their default)

francisp · August 18, 2023, 5:17pm

I won’t say it is not a smart move to change from Zigbee2MQTT to ZHA, but if the problem originates from your Zigbee network, you will still have the same problems.

MJWMJW · August 19, 2023, 11:30am

Absolutely @francisp I wanted to see if this was software by illimation.

I’ve moved them all back now perhaps a little too soon though. Some of the devices weren’t supported to well, and still I lost one of the devices, but it was strange. This one Aurora Aone dummer, has a back light, and a control for the lights. The backlight still worked, but the dimmer ‘switch’ didn’t.

So now I am all back on Z22M. Network issues continue. I am on the ZZH stick on a different USB and extension.

Today the network slowed then fell over, Z2M no longer recognised the ZZH stick which needed to be physically pulled and reinserted to start again.

I am continually seeing messages for devices like " Accepting joining not in blocklist device ‘0x84b4dbfffe089599’ ", which are then often followed by a " Failed to read state of " message.

Is there a good way to share a debug log, other than a short part like below?

The only thing that is coming to mind now is the Tigo Solar optimisers, when the network was on channel 11, the optimisers caused such severe interferance that it would cause a number of devices to reset them selves (in the case of some sockets, would power off, and lights power on), this is why I moved to channel 15, where the issue didn’t seem to happen. I wonder if I need to move channel again perhaps - but I am not sure where to go

debug 2023-08-19 12:18:27: Device 'Office Top Light' announced itself
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"Office Top Light","ieee_address":"0x84b4dbfffe0bcc2c"},"type":"device_announce"}'
debug 2023-08-19 12:18:27: Received Zigbee message from 'Dining Room Presence 2', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,1,143],"type":"Buffer"},"datatype":2,"dp":9}],"seq":13824}' from endpoint 1 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Dining Room Presence 2', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,1,143],"type":"Buffer"},"datatype":2,"dp":9}],"seq":13824}' from endpoint 1 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'DiningRoomDoubleSocket1', type 'commandQueryNextImageRequest', cluster 'genOta', data '{"fieldControl":0,"fileVersion":22,"imageType":5129,"manufacturerCode":4636}' from endpoint 1 with groupID 0
debug 2023-08-19 12:18:27: Device 'DiningRoomDoubleSocket1' requested OTA
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Kitchen Motion Sensor', type 'attributeReport', cluster 'msIlluminanceMeasurement', data '{"measuredValue":16676}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:27: Received Zigbee message from 'Dining Room Presence 2', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,1,143],"type":"Buffer"},"datatype":2,"dp":9}],"seq":13824}' from endpoint 1 with groupID 0
info  2023-08-19 12:18:27: Accepting joining not in blocklist device '0x0017880108676250'
debug 2023-08-19 12:18:27: Received Zigbee message from 'Dining Room Presence 2', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,1,143],"type":"Buffer"},"datatype":2,"dp":9}],"seq":13824}' from endpoint 1 with groupID 0
info  2023-08-19 12:18:27: Accepting joining not in blocklist device '0x84b4dbfffe089593'
info  2023-08-19 12:18:27: Accepting joining not in blocklist device '0x84b4dbfffe089593'
debug 2023-08-19 12:18:27: Device 'Dining Room Lights 1' announced itself
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"Dining Room Lights 1","ieee_address":"0x84b4dbfffe089593"},"type":"device_announce"}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":3.96}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Monitor', payload '{"energy":0.01,"linkquality":94,"power":34,"state":"ON"}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dishwasher', payload '{"energy":0.03,"linkquality":58,"power":1,"state":"ON"}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/AC1P', payload '{"energy":0.07,"linkquality":65,"power":2,"state":"ON"}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Living Room Motion Sensor', payload '{"battery":100,"illuminance":10108,"illuminance_lux":10,"led_indication":null,"linkquality":76,"motion_sensitivity":"high","occupancy":true,"occupancy_timeout":0,"temperature":23.89,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":null}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":true,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Landing Motion Sensor', payload '{"battery":100,"illuminance":11563,"illuminance_lux":14,"led_indication":true,"linkquality":72,"motion_sensitivity":"high","occupancy":true,"occupancy_timeout":0,"temperature":21.9,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4.03}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4.03}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4.03}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4.03}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4.04}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4.04}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4.04}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Microwave', payload '{"energy":0.09,"linkquality":36,"power":0,"state":"OFF"}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Washing Machine', payload '{"energy":0.01,"linkquality":72,"power":0,"state":"ON"}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4.04}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Monitor', payload '{"energy":0.01,"linkquality":94,"power":34,"state":"ON"}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":3.99}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":3.99}'

info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":3.99}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Bathroom Top Light', payload '{"brightness":76,"color_mode":"color_temp","color_temp":301,"linkquality":54,"power_on_behavior":"previous","state":"OFF","update":{"installed_version":16785666,"latest_version":16785666,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Landing Motion Sensor', payload '{"battery":100,"illuminance":11563,"illuminance_lux":14,"led_indication":true,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":21.9,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Landing Motion Sensor', payload '{"battery":100,"illuminance":11563,"illuminance_lux":14,"led_indication":true,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":21.9,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
info  2023-08-19 12:18:27: MQTT publish: topic 'zigbee2mqtt/Kitchen Motion Sensor', payload '{"battery":100,"illuminance":16676,"illuminance_lux":47,"led_indication":true,"linkquality":98,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":22.11,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":false}'
debug 2023-08-19 12:18:28: Retrieving state of 'Bedroom Top Light' after reconnect
debug 2023-08-19 12:18:29: Retrieving state of 'Dining Room Lights 2' after reconnect
debug 2023-08-19 12:18:29: Retrieving state of 'Office Top Light' after reconnect
debug 2023-08-19 12:18:29: Retrieving state of 'Dining Room Lights 1' after reconnect
debug 2023-08-19 12:18:32: Received Zigbee message from 'Dining Room Presence 2', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,1,146],"type":"Buffer"},"datatype":2,"dp":9}],"seq":14080}' from endpoint 1 with groupID 0
info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4.02}'
info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Dining Room Presence 2', payload '{"cli":" ","detection_delay":0.1,"fading_time":5,"illuminance_lux":2000,"linkquality":98,"maximum_range":6,"minimum_range":0.6,"presence":true,"radar_sensitivity":8,"self_test":"check_success","target_distance":4.01}'

info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Living Room Motion Sensor', payload '{"battery":100,"illuminance":10108,"illuminance_lux":10,"led_indication":null,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":23.89,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":null}'
info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Living Room Motion Sensor', payload '{"battery":100,"illuminance":10108,"illuminance_lux":10,"led_indication":null,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":23.89,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":null}'
info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Living Room Motion Sensor', payload '{"battery":100,"illuminance":10108,"illuminance_lux":10,"led_indication":null,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":23.89,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":null}'
info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Living Room Motion Sensor', payload '{"battery":100,"illuminance":10108,"illuminance_lux":10,"led_indication":null,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":23.89,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":null}'
info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Living Room Motion Sensor', payload '{"battery":100,"illuminance":10108,"illuminance_lux":10,"led_indication":null,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":23.89,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":null}'
debug 2023-08-19 12:18:32: Received Zigbee message from 'Living Room Motion Sensor', type 'attributeReport', cluster 'msOccupancySensing', data '{"occupancy":0}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:32: Received Zigbee message from 'Living Room Motion Sensor', type 'attributeReport', cluster 'msOccupancySensing', data '{"occupancy":0}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:32: Received Zigbee message from 'Living Room Motion Sensor', type 'attributeReport', cluster 'msOccupancySensing', data '{"occupancy":0}' from endpoint 2 with groupID 0
debug 2023-08-19 12:18:32: Received Zigbee message from 'Living Room Motion Sensor', type 'attributeReport', cluster 'msOccupancySensing', data '{"occupancy":0}' from endpoint 2 with groupID 0
info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Living Room Motion Sensor', payload '{"battery":100,"illuminance":10108,"illuminance_lux":10,"led_indication":null,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":23.89,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":null}'
info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Living Room Motion Sensor', payload '{"battery":100,"illuminance":10108,"illuminance_lux":10,"led_indication":null,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":23.89,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":null}'
info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Living Room Motion Sensor', payload '{"battery":100,"illuminance":10108,"illuminance_lux":10,"led_indication":null,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":23.89,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":null}'
info  2023-08-19 12:18:32: MQTT publish: topic 'zigbee2mqtt/Living Room Motion Sensor', payload '{"battery":100,"illuminance":10108,"illuminance_lux":10,"led_indication":null,"linkquality":72,"motion_sensitivity":"high","occupancy":false,"occupancy_timeout":0,"temperature":23.89,"update":{"installed_version":1107323831,"latest_version":1107323831,"state":"idle"},"update_available":null}'
error 2023-08-19 12:18:33: Failed to read state of 'Bedroom Top Light' after reconnect (Read 0x84b4dbfffe08a63a/1 genOnOff(["onOff"], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (SRSP - AF - dataRequest after 6000ms))
error 2023-08-19 12:18:39: Failed to read state of 'Dining Room Lights 2' after reconnect (Read 0x84b4dbfffe089599/1 genOnOff(["onOff"], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (SRSP - AF - dataRequest after 6000ms))
error 2023-08-19 12:18:45: Failed to read state of 'Office Top Light' after reconnect (Read 0x84b4dbfffe0bcc2c/1 genOnOff(["onOff"], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (SRSP - AF - dataRequest after 6000ms))
error 2023-08-19 12:18:51: Failed to read state of 'Dining Room Lights 1' after reconnect (Read 0x84b4dbfffe089593/1 genOnOff(["onOff"], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (SRSP - AF - dataRequest after 6000ms))

MJWMJW · August 19, 2023, 11:32am

Log on dropbox

francisp · August 19, 2023, 11:35am

github.com/Koenkk/zigbee2mqtt

Devices keep joining the network (with "Permit join" off)

opened 02:07PM - 12 May 23 UTC

closed 07:26AM - 13 May 23 UTC

hellcry37

problem

### What happened? Firstly i have this device in my network ( TuYa TS0215A_remo…te ), all works ok without any issues except i see in the logs something like this fom time to time: ```txt info 2023-05-11 09:42:50: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 10:03:02: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 10:16:19: Accepting joining not in blocklist device '0x0017880109167f24' info 2023-05-11 10:16:20: Accepting joining not in blocklist device '0x0017880109167f24' info 2023-05-11 10:23:15: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 10:43:27: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 11:03:40: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 11:23:52: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 11:44:05: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 12:04:18: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 12:24:30: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 12:44:43: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 13:04:55: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 13:25:08: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 13:45:20: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 14:05:33: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 14:25:46: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 14:45:58: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 15:06:11: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 15:26:24: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 15:46:36: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 16:06:49: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 16:27:02: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 16:27:02: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 16:47:14: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 17:07:26: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 17:27:39: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 17:47:52: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 18:08:04: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 18:28:17: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 18:48:30: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 19:08:42: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 19:28:55: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 19:49:07: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 20:09:20: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 20:29:32: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 20:49:45: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 21:09:58: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 21:30:10: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 21:50:23: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 22:10:36: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 22:30:48: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 22:51:01: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' info 2023-05-11 23:11:14: Accepting joining not in blocklist device '0xbc33acfffe26e4a7' ``` where "0xbc33acfffe26e4a7" is https://www.zigbee2mqtt.io/devices/TS0215A_remote.html#tuya-ts0215a_remote and "0x0017880109167f24" is https://www.zigbee2mqtt.io/devices/9290012607.html#philips-9290012607 For the remote as you can see the issue is happening all the time. I am not doing anything, just the device is joining the network all the time. For "Hue motion sensor" is a hole other issue, even if I decide to remove one of the sensors from the network, they will come back again without permit join enabled. ### What did you expect to happen? Permit join to work as expected for all devices. ### How to reproduce it (minimal and precise) _No response_ ### Zigbee2MQTT version 1.30.4 commit: b2dd21e but the issues have a long time (older versions) ### Adapter firmware version 20220219 ### Adapter Electrolama ZZH ### Debug log _No response_

MJWMJW · August 19, 2023, 11:38am

I saw this, but honestly I don’t understand it - in my case it is 10s of devcices, not one single one… I suppose I could join them to an amazon echo, then back to Z2M to make sure they reall y did remove and get re-added.

francisp · August 19, 2023, 11:41am

What firmware is your ZZH on ?

MJWMJW · August 19, 2023, 11:46am

I’ve just done a filter for unique devices, it appears only 8 devices causing this message… I’ll get those all reset in a moment.

ZZH is on n-1 I think, but I can update that if it would be useful.
Sonoff is on latest, CC1352P2_CC2652P_launchpad_coordinator_20230507.hex

francisp · August 19, 2023, 11:49am

Since you have 2 sticks, you could flash one with the router firmware, and see if that improves things.

MJWMJW · August 19, 2023, 12:51pm

I’ve just got back from delivering some wood to a friend and find pretty much whole network as far as I can see is dead again. Z2M has not stopped as far as I can see.

I’ve switched over to the Sonoff stick now. It seems the network is pretty broken, it cannot reach many devices with errors like this:

error 2023-08-19 13:50:37: Failed to read state of 'Bedroom Top Light' after reconnect (Read 0x84b4dbfffe08a63a/1 genOnOff(["onOff"], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (SRSP - AF - dataRequest after 6000ms))
error 2023-08-19 13:50:43: Failed to read state of 'Dining Room Lights 2' after reconnect (Read 0x84b4dbfffe089599/1 genOnOff(["onOff"], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (SRSP - AF - dataRequest after 6000ms))
error 2023-08-19 13:51:19: Failed to read state of 'Office Top Light' after reconnect (Read 0x84b4dbfffe0bcc2c/1 genOnOff(["onOff"], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (SRSP - AF - dataRequest after 6000ms))
error 2023-08-19 13:51:25: Failed to read state of 'Dining Room Lights 1' after reconnect (Read 0x84b4dbfffe089593/1 genOnOff(["onOff"], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (SRSP - AF - dataRequest after 6000ms))

This is normally the point I have to turn everything off in the house and turn it all back on to get it to start working again.

I really have no clue what to do.

francisp · August 19, 2023, 1:04pm

Running on a Raspberry Pi ?

MJWMJW · August 19, 2023, 1:07pm

Intel NUC5i7RYH.

Just turned off all lighting circuits and on again… Did not help. I will try all socket circuits next. Now this will also restart all networking including wifi, and HA itself.

MJWMJW · August 19, 2023, 1:18pm

I tried one side of the house which HA is not plugged in to, this also did not help. Before doing the side of the house with HA plugged in, I thought to power off and on HA, this seems to have brought things back this time.

francisp · August 19, 2023, 1:25pm

Ok, not a Pi, so no power supply issues.