This is a new topic dedicated to ZigBee Coordinators by ZigStar
All information required to assembly, flash and run ZigStar USB or LAN devices is located here: ZigStar Web for more information lets have a discussion:
Hi @mercenaruss , got the Lan only ZigStar gateway today and looking to flash the wt32-eth01 with Esphome but I am unable to do it. Giving an error when trying to write to flash. Any ideas?
What tool are you using to flash the esp32. Have tried the Esphome flasher.
Chip Info:
- Chip Family: ESP32
- Chip Model: ESP32D0WDQ5 (revision 1)
- Number of Cores: 2
- Max CPU Frequency: 240MHz
- Has Bluetooth: YES
- Has Embedded Flash: NO
- Has Factory-Calibrated ADC: YES
- MAC Address: 7C:87:CE:44:A8:21
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.
- Flash Size: 4MB
- Flash Mode: dio
- Flash Frequency: 40MHz
Erasing flash (this may take a while)...
Chip erase completed successfully in 13.7s
Compressed 15872 bytes to 10319...
Writing at 0x00001000... (100 %)Wrote 15872 bytes (10319 compressed) at 0x00001000 in 0.2 seconds (effective 541.3 kbit/s)...
Unexpected error: Error while writing flash: Timed out waiting for packet header
Update: Sorted it by using 5v from serial adapter instead of 3.3v.
Hi, thank you for your interest, I hope by end of this month will be available.
Scarcity of chips waiting for some production to be ready soon.
Will update once is available.
Secondly, please consider using other USB-to-UART chip with EEPROM on ZigStar USB adapter so can add unique PID (Product ID) or other USB identification strings for automatic USB discovery, see:
Just to be clear; the reaspon for both of those two requests is so can use automatic discovery in ZHA, which is something that has already been added for a few Zigbee gateways and Zigbee USB dongles:
Hi @Hedda of course i like to received design reviews and feature requests.
I will go thru all you send and will try to make it happen.
Fell free to come up with comments and wishes
Just got my ZigStar and trying to pair a few of my TRADFRI repeaters and Xiaomi leak detectors. I was having real trouble getting them to pair. Had to try more than 20 times for one item to correctly pair. Right now my network looks like this:
Also, when I try to pair more devices I get something with “z-stack does not have a mandatory basic cluster.” Also two of the three leak detectors have already gone offline.
Yes, affected all industry, because is based on CC2652P and CC1352P chip.
Myself i don’t like the play around with E72-2G4M20S1E ( cutting antenna and so on), i like straight connection without tampering with design.
User xyzroe come up with idea to build a customisable firmware for our LAN Coordinator.
Firmware is based on ZiGate-Ethernet.
And was completely rewriten to match our PCB and required functions.
Exactly ,this is the web interface for LAN Gateway, will be used for all gateways we will release to public.
ZeroConf will be hopefully work with HA soon.