Look one post up. 
I’m not using Custom Header - but might have installed the plugin
I fixed it, by unticking ‘Always use private browsing mode’ in Firefox.
OK, sticking with 0.109.6 until a finger gets pulled out from somewhere and changing icon/icon color dynamically is supported in the core now that this release breaks the (now deprecated) customizer integration that allows it
1 Like
I fixed it by unticking ‘Always use private browsing mode’ in Firefox.
1 Like
Indeed after deactivating private browsing it correctly displays all icons.
However it is still kind of strange that i have to turn off private browsing for using the interface. In 0.109 this was no problem.
I click on update and a error occur:
Error: Unknown Error, see logs
Nothing in logs lol
What can i do to update?
Check the supervisor logs
Supervisor -> system -> logs
ERROR (SyncWorker_7) [supervisor.docker.interface] Can’t install homeassistant/qemux86-64-homeassistant:0.110.0 -> 500 Server Error: Internal Server Error (“Get https://registry-1.docker.io/v2/: dial tcp: lookup registry-1.docker.io on 127.0.0.53:53: read udp 127.0.0.1:32770->127.0.0.53:53: i/o timeout”).
Thanks.
What to do?
Too many problems with this new release:
A lot of error messages that I have to investigate and without notice !!!
Roomba is not working at all…
No possibility to go back to version 0.109.6… HA is not starting anymore !!!
Very annoying
2020-05-20 23:04:02 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for hacs which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experien$
2020-05-20 23:04:02 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for sonoff which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experi$
2020-05-20 23:04:02 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for config_check which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you $
2020-05-20 23:04:02 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for customizer which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you ex$
2020-05-20 23:04:02 WARNING (MainThread) [homeassistant.components.http] The 'base_url' option (with value '<mynetwork>') is deprecated, please remove it from your configuration
2020-05-20 23:04:05 ERROR (MainThread) [homeassistant.core] Error doing job: Unclosed client session
2020-05-20 23:04:07 ERROR (MainThread) [homeassistant.core] Error doing job: Unclosed client session
2020-05-20 23:04:14 ERROR (SyncWorker_9) [homeassistant.util.package] Unable to install package av==7.0.1: Failed building wheel for av
Command "/srv/homeassistant/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-rk_lufi0/av/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __fi$
2020-05-20 23:04:14 ERROR (MainThread) [homeassistant.setup] Setup failed for stream: Requirements for stream not found: ['av==7.0.1'].
2020-05-20 23:04:14 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for average which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you exper$
2020-05-20 23:04:15 ERROR (SyncWorker_19) [roomba.roomba] Error: [Errno 104] Connection reset by peer
2020-05-20 23:04:15 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for rpi_power which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you exp$
2020-05-20 23:04:16 ERROR (MainThread) [homeassistant.components.roomba] Timeout expired
2020-05-20 23:04:16 WARNING (MainThread) [homeassistant.config_entries] Config entry for roomba not ready yet. Retrying in 5 seconds.
2020-05-20 23:04:25 ERROR (SyncWorker_19) [roomba.roomba] Error: [Errno 104] Connection reset by peer
2020-05-20 23:04:26 WARNING (MainThread) [homeassistant.components.sensor] Setup of sensor platform mqtt is taking over 10 seconds.
2020-05-20 23:04:27 ERROR (MainThread) [homeassistant.components.camera] The onvif platform for the camera integration does not support platform setup. Please remove it from your config.
2020-05-20 23:04:38 ERROR (SyncWorker_11) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:04:38 ERROR (SyncWorker_11) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:04:38 ERROR (SyncWorker_11) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:04:38 ERROR (SyncWorker_11) [roomba.roomba] Unable to connect to 192.168.2.80
2020-05-20 23:04:38 ERROR (MainThread) [homeassistant.components.roomba] Error to connect to vacuum
2020-05-20 23:04:38 WARNING (MainThread) [homeassistant.config_entries] Config entry for roomba not ready yet. Retrying in 10 seconds.
2020-05-20 23:04:49 ERROR (SyncWorker_8) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:04:49 ERROR (SyncWorker_8) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:04:49 ERROR (SyncWorker_8) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:04:49 ERROR (SyncWorker_8) [roomba.roomba] Unable to connect to 192.168.2.80
2020-05-20 23:04:49 ERROR (MainThread) [homeassistant.components.roomba] Error to connect to vacuum
2020-05-20 23:04:49 WARNING (MainThread) [homeassistant.config_entries] Config entry for roomba not ready yet. Retrying in 20 seconds.
2020-05-20 23:05:10 ERROR (SyncWorker_12) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:05:10 ERROR (SyncWorker_12) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:05:10 ERROR (SyncWorker_12) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:05:10 ERROR (SyncWorker_12) [roomba.roomba] Unable to connect to 192.168.2.80
2020-05-20 23:05:10 ERROR (MainThread) [homeassistant.components.roomba] Error to connect to vacuum
2020-05-20 23:05:10 WARNING (MainThread) [homeassistant.config_entries] Config entry for roomba not ready yet. Retrying in 40 seconds.
2020-05-20 23:05:16 WARNING (SyncWorker_10) [homeassistant.components.tplink.switch] Could not read state for 192.168.2.61: Communication error
2020-05-20 23:05:17 ERROR (MainThread) [frontend.js.latest.202005190] <mynetwork>/hacsfiles/custom-header/custom-header.js:1:16344 Uncaught TypeError: Cannot read property 'style' of null
2020-05-20 23:05:35 ERROR (MainThread) [homeassistant.core] Error doing job: SSL error in data received
Traceback (most recent call last):
File "/usr/lib/python3.7/asyncio/sslproto.py", line 526, in data_received
ssldata, appdata = self._sslpipe.feed_ssldata(data)
File "/usr/lib/python3.7/asyncio/sslproto.py", line 207, in feed_ssldata
self._sslobj.unwrap()
File "/usr/lib/python3.7/ssl.py", line 767, in unwrap
return self._sslobj.shutdown()
ssl.SSLError: [SSL: KRB5_S_INIT] application data after close notify (_ssl.c:2609)
2020-05-20 23:05:48 ERROR (MainThread) [frontend.js.latest.202005190] <mynetwork>/hacsfiles/custom-header/custom-header.js:1:16344 Uncaught TypeError: Cannot read property 'style' of null
2020-05-20 23:05:51 ERROR (SyncWorker_18) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:05:51 ERROR (SyncWorker_18) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:05:51 ERROR (SyncWorker_18) [roomba.roomba] Error: [Errno 111] Connection refused
2020-05-20 23:05:51 ERROR (SyncWorker_18) [roomba.roomba] Unable to connect to 192.168.2.80
2020-05-20 23:05:51 ERROR (MainThread) [homeassistant.components.roomba] Error to connect to vacuum
2020-05-20 23:05:51 WARNING (MainThread) [homeassistant.config_entries] Config entry for roomba not r
Thanks! I had my history preference set to ‘Never remember history’. I wonder if one of the speed enhancements in this release requires caching of the md icons.
Use case Internal and external adress???
This is an example of the use case, it also explains why it’s useful:
1 Like
Just had exactly the same error here too Troon. Anyone know if this should this be reported on Github? Not sure how much of an issue it actually is as my install is pretty much vanilla as I started again on 0.109 and have not configured anything other than Hue yet.
Edit, just to repeat the error:
hass-nabucasa 0.34.2 has requirement pytz~=2019.3, but you'll have pytz 2020.1 which is incompatible
Hmm, so removing the http: base_url, and moving it to the config seems like a good idea, but now the Google TTS went out again 
I love the new ‘integrations’ design where it bundles the same integrations into one.
Just an observation to the cool calendar. Week start day is now Sunday and we really miss the week numbers (the 25 mio. of us in Scandinavia) and then the week starts on a Monday.
Yeah, not ideal.
Am I understanding the OpenZWave integration correctly? It uses an instance of OpenZWave to to handle ZWave functionality rather than Home Assistant’s in-house fork?
I was happy running 0.109.6 core, pulled latest image and can’t access frontend since. I tried rolling back to 0.109.6, removed db file, my .storage and everything else is in git so changes to files are rolled back as well. Yet container starts but never opens port 8123. It seems that HA it’s partly working as I see data flowing into influx. The only error in the log is:
2020-05-20 23:56:03 ERROR (SyncWorker_14) [miio.miioprotocol] Unable to discover a device at address 10.0.40.12
2020-05-20 23:56:04 WARNING (MainThread) [homeassistant.components.fan] Platform xiaomi_miio not ready yet. Retrying in 30 seconds.
Tried removing container, redeploying, removing db on and on again, yet can’t make it work. ANything else I can do?