Hello, I don’t get the Raspberry Pi 5 option when I run dpkg -i homeassistant-supervised.deb Should I use the Pi4 option for my Pi5? Grateful for answers. Fredrik [image] Guide: How to install Home Assistant supervised on Rpi4 with RaspiOS (64 bit) - October 2022 Community Guid…

Managed to install it supervised w/ rpi5 beta releases? [image] Expected support for Home Assistant OS on the Raspberry Pi 5 Stable support for Home Assistant OS on Raspberry Pi 5 expected end 2023/early 2024 [image] Raspberry Pi 5 support · home-assi…

I have succesfully installed and ran HA Supervised on Pi 5. During installation choose Pi 4 and it works normally. Do not forget to switch the kernel page size from 16kb (default on Pi 5) to 4 kb, because HA uses jemalloc that crashes with 16kb page size and therefore docker container with HA won’t…

Hi, I’m desperate to do this as i want to install HA sup… Can you tell me how to change the kernel page size from 16kb to 4kb?

I have sent the link to the guide in my previous reply - “Pi5 16K PageSize Kernel Incompatible Software”. Go to boot/config.txt and change the line “kernel=” to: kernel=kernel8.img

Here I found a guide for installing: [image] Guide: How to install Home Assistant supervised on Rpi4 with RaspiOS (64 bit) - October 2022 Community Guides Warning The following installation instructions, for Home Assistant Supervised on Raspberry Pi OS, will produce an un…

I think the Pi 5 GPIO mappings are different on the Pi 5 now, so GPIO support may not work correctly if choosing RPI4.

Edit /var/lib/dpkg/info/homeassistant-supervised.templates and add raspberrypi5-64. then run: sudo systemctl stop hassio-supervisor.service sudo docker stop homeassistant sudo docker rm homeassistant sudo dpkg-reconfigure homeassistant-supervised sudo systemctl start hassio-supervisor.service …

hey guys, thx a lot for the instructions. so i did as [Block3r] said, so kernel=kernel8.img apparmor=1 security=apparmor installed os-agent and HA supervised with RPI4. had issues with the homeassistant docker, so followed the instructions from [Terry Sanders] in addition. and voila …

Installed on rpi 5 os or Debian? Is it stable?

Installing Supervised on Pi5

Installation

block3r-1 (Block3r) January 2, 2024, 6:59pm 8

Here I found a guide for installing:

I have not done point A and B (the unified_cgroup_hierarchy thing) from Step 3 (changing grub file) and everything worked out of the box. Do not forget to enable apparmor, however (just at the end of Step 3).