I just had tried something new.
I removed the default_config: in my configuration.yaml.
Previously i tried already disabling all my components one by one, but wasnt able to narrow it down.
However, since removing default_config: my CPU Usage is MUCH lower.
HomeAssistant process is around 20% instead of 100%.
I do suspect the ssdp: but i will try to activate one by one all of the components in the default_config: and see where this leads me.
EDIT - NEW UPDATE
Found it… its the zeroconf:
When i add this one back to my config, it immediately uses a lot of CPU power.
Without it everything is fine. Now to find out why.
In my case I removed Z-wave configuration from configuration.yaml and added as a component and I have been running Home Assistant for 3 days without any issues.
Should have been fixed by 110.4 update. However, i also found that if I add my System to more than one VLAN HomeAssistant will use a lot more CPU Power. Zeroconf on or off.
Yes if my host machine is in multiple networks, homeassistant goes crazy with CPU usage. I tried it several times, and as soon as I add an aditional VLAN the CPU usage goes up substantially.
Hi all,
i’m currently having the same issue: HA runs ok for about 13 hour and then become unresponsive and very very slow.
Htop shows 100+ usage on python3 home assistant.
Tried to disable all the plugins and integrations without success. Default_config is not present in my config.yaml
I’m running hassio in docker on a ubuntu server machine hosted in a vmware esxi server.
I’m using hassio in a VLAN IOT but i’m passing the IOT VLAN as untegged one to the ubuntu VM, so only one LAN.
Hi, thanks for the reply.
Here the profile for 360 seconds. Note that now the home assistan is working, after i disabled some homekit in the configuration yaml. cpu usage still very high