2022.10: All over the place

Blog
280

sure, I see that. Though, the BT wont show you your neighbors devices, unless within 10m or so?
ble tracker is an entirely different beast (showing huge amounts of those) but you have to explicitly set it up in yaml.
iBeacon integration can be easily ignored, and I’m sincerely considering that myself. Only my curiosity is withholding me to do so just now.

leaves you with the BT integration itself. You can ‘not install’ that, with a small effort. You’d have to stop using default: as Petro already pointed out (is what I do indeed, for the sole reason I don’t want a Map in my left side menu…)

So, all in all, users have loads of options, (though some more iBeacon control wouldn’t hurt… :wink: )

1 Like
281

need another WTH for the Map thingy. shouldn’t be big…

282

Thanks for thinking with me. I couldn’t access the internet for a few days because I switched providers. Never do it before the weekend when the wrong cable comes with the modem.
Anyway. I still have the same error. Even after I deleted all the files of AppDaemon from HA. I deleted the addon AppDaemon and added it again. The files were restored by the addon so that only the app ‘Hello world’ was available and nothing else. Started up and yet again:
“HASS: Error getting Home Assistant state for None” etc…
I am running Debian 11 (Bullseye) on a supported version of HA supervised.
I just don’t know about it any more. And I don’t have enough knowledge to look under the hood.
Bye the way: Don’t mind the fake dash_url. I changed all url’s to something what came up spontaneously. :crazy_face:

283

Anybody know?

284

Please don’t bump your issue after less than 24 hours.

285

What is going on with Statistics card?
With “period: 5minutes” earlier it was displayed for no longer than 10 days, now it is for 7 days only.
If it is related - my Recorder’s settings is “purge_keep_days: 10”.
I really believed that ANY statistics is kept forever.
Described this issue here & here.

286

Just resolved up upgrade from 2022.10.2 to 2022.10.3 issue - seems that if you have Portainer-ce installed as a separate docker image on your host that it will no longer upgrade.

Not sure why this is the case - my Supervised installation has been like this since I first built it over 2 years ago yet it breaks now?

Interestingly one of my test instances running on Ubuntu server still has portainer running and is fine…

287

If you don’t follow the instructions, it will break.

289

there’s nothing in the breaking changes that said this would happen - it won’t even upgrade if the container image is still on the system…

290

There’s a thread somewhere about disabling that check on your system.

1 Like
291

You didn’t follow the instructions when you installed portainer, because the instructions say it is not allowed to install other software

The link to ADR14 is the first link in the supervised install instructions. Clearly many people have not read and/or understood what it says.

You don’t get a ‘breaking change’ notification when you broke it yourself.

1 Like
292

thanks @petro I’ll go looking for it.

293

the whole idea of dockerising something is that you can run other containers on the same host. I run a managed environment, everything is updated which is my choice. If something stops working having worked for 2 years, then it’s a breaking change, irrespective of the instructions.

The fact that I can’t have the docker image for portainer-ce sitting on the filesystem is a concern - what will happen should that be extended to shell scripts, etc that guys call from within Home Assistant ?

294

I use a template sensor with the ibeacon from my andriod to reduce the logging (by removing various attributes) and also to only switch to ‘off’ if it’s in the off-state for 90 seconds

My raw data looks like the teeth of a comb

My “smoothed” data looks like this

image
image1213×78 3.29 KB

1 Like
295

I’m curious to know if you experienced any speed difference with the new single dashboard and subviews compared with multiple dashboards

296

Yes, It’s a shame that “Ignore” does not stay sticky in the .storage folder files

297

OTOH you knew this when you installed supervised. Why complain now? If you don’t want to go with the restrictions of supervised, don’t use it. Find another way, like proxmox. Not that hard. But I suppose moaners will moan.

Also this has nothing to do with core 2022.10.

1 Like
298

Looks like Home assistant Stopps being what it Was, a friendly community thats working together. Nowadays there are to many people having too much free time and being unpolite, rude and even insulting (indirect). And i dont speak about the average User which are Posting their Problems. I speak about Moderator! And some users that are answering over and over in a way thats just saying “go f*** yourself” if you dont know this or that.

Home assistant has become a Company thats selling products and making money with it. Oh Yeah the Software is free but way over 50% of IT was already there or made by users and not the Company behind it. With These changes there must be a good Support and polite way to communicate with users. NABU Casa, you cant go on this way with These Kind of Moderators and Nearly no official Support. You took the wrong corner, turn around and Look what you have forgotten in the last year. And get rid of These Kind of Moderators and users.

299

You joined 1 day ago. In that time, you have posted three messages, each more rude. Stop it or go away.

If you really want help, @petro has given you good advice about posting to github. His reply may have been a bit peremptory, but I am guessing he was responding to your obnoxious attitude.

And if you are really serious about Netatmo (the company) testing the netatmo integration [1], please copy in your discussions with them. I am sure the devs here would like more manufacturer buy in, so if you manage to get Netatmo to support HA, you’re on a winner.

[1] referring to this comment

3 Likes
300

And how exactly did I insult you?

5 Likes