Aeon Labs Minimote with zwave js?

[kan84]

Glad that worked. I added another minimote after changing the battery. Have one more, struggling to change the battery but not going to lie they have worked well as remote devices on smartthings and am glad it has been working well with HA zwavejs

[Neuz_NL]

i have read this solution for the Aeon Minimote and this get me on to the right track.
I’m using Aeon Wallmote Quad and i think the solution is the same for every device.

My final code is as followed:

- alias: Wallmote 1
  trigger:
    - platform: event
      event_type: zwave_js_event
      event_data:
        device_id: [OWN DEVICE ID HERE]
        label: [OWN LABEL HERE]
        value: KeyPressed (or KeyHeldDown or KeyReleased)
  action:
    - service: switch.toggle
      entity_id: light.wall

I came to this solution as follow:

1. Add node to Zwave JS
2. Wait untill is fully reconised
3. Go to Developer Tools - Events
4. Fill in zwave_js_event by Listen to events and press start listening
5. Press, hold or release the button on your node
6. Press stop listening
7. Write down device_id, label and value
8. Change previous code into your own

Good luck.

[kvandenh1]

Hey I am sure I need to set up a remote I have as a scene controller. Is it possible currently with zwavejs or only with js2mqtt?
If only with js2mqtt how do I stop the zwavejs integration so I can setup js2mqtt to change the values on the remote?

[Soccs]

Thank you so much! I can now make automations for all my Buttons!

[casperse]

I don’t have a scene mode I can select in the dropdown?

Any input to why the Quad button is shown like this now?

Under configurations I only have power:

[Soccs]

Hello,

You must make an automation for the scenes to work. i have made an automation for dummies like me. let me find it.

Blueprint for any remote button. Z-wave-js

If this politically incorrect please delete. Also its a terrible copy of @bachya for the nanomote quad blueprint but it works with any (or at least with my other button made by Technisat. there are still many code from the nano mote, but it works you can change the number of buttons you want to use and also change the device name on the yaml. But it works like a charm for me! for all the noobs like me, if you enconter any problem , just reply. and i will try to help. I coundt…

[Soccs]

blueprint:
  name: Aeotec ZWA003 NanoMote Quad
  description: Create automations for the Aeotec ZWA003 NanoMote Quad using the
    OZW integration.
  domain: automation
  input:
    aeotec_nanomote:
      name: Aeotec NanoMote Quad
      description: The NanoMote Quad to interact with.
      selector:
        device:
          integration: zwave_js
          manufacturer: Aeotec Ltd.
          model: Aeotec NanoMote Quad
    button_1:
      name: Press Button One
      description: Action to run on button press.
      default: []
      selector:
        action: {}
    button_2:
      name: Press Button Two
      description: Action to run on button press.
      default: []
      selector:
        action: {}
    button_3:
      name: Press Button Three
      description: Action to run on button press.
      default: []
      selector:
        action: {}
    button_4:
      name: Press Button Four
      description: Action to run on button press.
      default: []
      selector:
        action: {}

mode: single

max_exceeded: silent

trigger:
  platform: event
  event_type: zwave_js_event
  event_data:
    command_class_name: Central Scene
    device_id: !input aeotec_nanomote

action:
  - variables:
      scene_id: "{{ trigger.event.data.property_key_name }}"
  - choose:
      - conditions: "{{ scene_id == '001' }}"
        sequence: !input button_1
      - conditions: "{{ scene_id == '002' }}"
        sequence: !input button_2
      - conditions: "{{ scene_id == '003' }}"
        sequence: !input button_3
      - conditions: "{{ scene_id == '004' }}"
        sequence: !input button_4

this one is for the nanomote

[Soccs]

Just reply to me so i see if you have any problems. im a total noob and I made them all work with the help of the Forum

[kan84]

What are the values available under Scene 001 and so on. Quad button cannot be used as a secondary controller I believe thats why there is no group or scene mode.

Look for Scene under all four buttons and set it one by one after you wake the device. Then use the above blueprint for creating automation

[casperse]

Hi @Soccs thanks for reaching out! trying to help

To anyone else who finds this and wants to use the new Z-wave integration.
I created a new yaml in blueprint folder using the code provided from Socs
path: \config\blueprints\automation\homeassistant

I added the Nanomote Quad using the zwavejs2mqtt UI:

I then used the template to create and select the NanoMote:

This is great! - Any way to get double press working having 2x4 buttons?
One thing fixed and then you just want more

[Soccs]

You want 2 separate controllers do the same thing ?

[casperse]

No I did see someone using Smartthings with the NanoMote Quad having two functions for a single button. Like one press & Double press - or was it long press? cant remember

[Soccs]

try listenning it it. press once, and see the log, and then double press and see if the log is diferent

[Soccs]

developers tools,
listen to events - zwave_js_event
and click start listening
and try it

[casperse]

@Soccs

events - zwave_js_event

looks to be the same:

Event 20 fired 5:19 PM:
{
    "event_type": "zwave_js_event",
    "data": {
        "type": "value_notification",
        "domain": "zwave_js",
        "node_id": 7,
        "home_id": 3547954940,
        "endpoint": null,
        "device_id": "90d9eb9a18e9bc5277e8ab130b86120d",
        "command_class": 91,
        "command_class_name": "Central Scene",
        "label": "Scene 001",
        "property_name": "scene",
        "property_key_name": "001",
        "value": "KeyPressed"
    },
    "origin": "LOCAL",
    "time_fired": "2021-03-03T16:19:13.107803+00:00",
    "context": {
        "id": "758ea15e7fb47b77ea9cdaf6cbc0f012",
        "parent_id": null,
        "user_id": null
    }
}

only the last part changes: “id”: “758ea15e7fb47b77ea9cdaf6cbc0f012”,

[Soccs]

show me the event of pressed once and long press or whatever method you wish to use. show me both

disclamer: im a total noob!

[casperse]

Same her! (noob) but maybee this would work… will have to experiement

ZWave-JS - GE/Jasco/Honeywell Double Taps

These are two related blueprints that allow creating automations around the GE/Jasco/Honeywell switch double-tap functionality. With Z-Wave JS, supported switch devices are automatically configured to respond to double tap events. These blueprints allow you to define actions which are triggered by these double tap events. This blueprint is for the older switches that don’t support Central Scene and rely on Basic Set commands. Generic Blueprint Assign any actions to a double tap on or off. Th…

[cweakland (Chris)]

I am using the zwavejs2mqtt addon, I have 22 devices configured and working properly (switches, lights, thermostats, etc.). When I try and listen to events for zwave_js_event I do not see anything. If I listen for * I see other actions happening within HASS, is there something I am missing?

Additionally, I am trying to setup a Hank One Key scene controller button, but I am not making much progress.

Edit, I got it fixed. I had to refresh the device.

[Soccs]

can yu show me a picture?
sometimes you misspell, and off course you must press the buttons

[Sanity]

I have this remote, I have it paired with ZwaveJS, cant configure it. I am totally lost following this guide. Can someone find some time to talk to me on discord about it? I am Sanity
#5603 on there.