ZHA Zigbee Tested Devices...Please add your device results

[cybergrimes (Matthew)]

Hey @dmulcahey

Any tip on where to locate a Climax technology smoke detector? I can’t seem to find any at a retailer

[Quatuor (QC)]

@cybergrimes

Climax technology smoke detector

I’ve got to play with Xiaomi Smoke Detector and Heiman Smoke Sensor
Both worked with HA, but I think Heiman is better. Even though a like the form factor of xiaomi, Heiman is

1. much louder
2. was more sensitive than xiaomi (xiami required quite a lot of smoke before going off. Maybe it is better for kitchens )
3. has “IAS Warning Device” cluster which in theory means you could trigger all your alarms to sound, once the smoke is detected by any of them.

[iantrich (Ian)]

@dmulcahey is there a repo that list working devices yet?
And along that same note, do you know if the Lutron Connected Bulb remotes work with ZHA yet?
Thanks. Looking forward to the ZHA panel

[cybergrimes (Matthew)]

@Quatuor

@cybergrimes

Climax technology smoke detector

I’ve got to play with Xiaomi Smoke Detector and Heiman Smoke Sensor
Maybe it is better for kitchens )

Thanks for the reply.

It actually is for a kitchen, did either accept a wired interconnect and any function to silence from HA? That’s what I am after, keep it interconnected with my 9 other detectors but silence that false alarm kitchen unit without pointing a fan at it or getting out the ladder

I could settle for removing it from the interconnect if I could just silence it easily!

[Quatuor (QC)]

@cybergrimes

did either accept a wired interconnect and any function to silence from HA?

None accept a wired interconnect.
I’m not sure about “silencing from HA”. There’s currently no support for it in HA, but Heiman has IAS Warning Device (1282) cluster, so if it is implemented properly you should be able to start & stop the alarm.

Xiaomi has a “multistate input” cluster, but I couldn’t find any information whether you can use it to silence the alarm.

[techoguy (Chase)]

Hi All,
I’m using a HUSBZB-1 USB stick
and trying to get Hue Bulbs connected. I got a hue dimmer to reset the bulbs which worked. Got one bulb connected then had issues with the second and third bulbs. Currently can’t get any of them to work but I’m not sure if it’s a hue bulb problem, ZHA problem, naming issue within HA (I had changed the name of the first bulb and started having problems after that which has happened before as well).

Anyone have any insight on issues that come up after renaming or using Hue bulbs?

UPDATE:
this appears to be an HA naming issue not a bulb issue. I was able to fix this by going in and changing the ID names back to the default and the bulbs started working without issues.

Another post with more details regarding my issue:
zha-hue-bulb-integration-zigbee-issues

[AlexStann]

Hi. I have some problem whith connection xiaomi mijia motion sensor.
I have 2 sensors and got one result:

2019-01-05 10:51:18 WARNING (MainThread) [bellows.zigbee.application] Unexpected response TSN=10 command=266 args=b'\x00\x00\x18\x01'
2019-01-05 10:51:18 WARNING (MainThread) [zigpy.endpoint] [0x7d90:1] Message on unknown cluster 0x0406

Each motion sensor online but do not change state. ‘off’ all time.

I use Elelabs usb zigbee dongle. Whith zha_new component motion sensors work correctly but there are a lot of problems thith other devices.
At zha I got stable connect to door and leak sensors but can not use motion sensor.

[lviperz]

I’ve read here that most people like and use Iris 3210-L plug as a repeater. That model is unavailable and seems to be replaced with the 3210-L1. Does anyone know if that model still works in HA as a repeater using the husbzb-1?

Also, I’ve been getting a lot of zha sensor taking longer than 30 second errors that is only corrected with a restart. Only device I’ve recently added was the newest model of the smartthings plug. About the same time I upgraded from ha 83.x to 84.6. So I’m not sure which introduced this error but it happens every 2 or 3 days now. The errors floods my log and none of my zigbee stuff works. Just wondering if the smartthings plug could be a problem.

Thanks.

[elikorh]

That’s pretty much what I’m gathering from my web searches. There’s a reddit post on r/homeassistant that gives some helpful info on this topic exactly.

I’m hoping that gurase’s method works so that the remote is instantaneous and can be independent if HA quits, but I’m going to try linking it with an automation in the meantime.

[techoguy (Chase)]

Has anyone used the Hue dimmer and successfully used the brighten or dim buttons for triggers in automation? Currently the state only shows on/off but I see in the logs that zigpy shows logs when those buttons are pressed. I’m just not sure how to capture those as a trigger.

[drjared88]

With the upcoming quirks implementation you should get events for these button presses that you can use for this.

[techoguy (Chase)]

hi drjared88, thanks for the quick reply. I’m new to HA, can you elaborate on what you mean, what is the “quirks implementation”? Is there a link to read up on it?

[drjared88]

Check out this.

ZHA Zigbee Tested Devices...Please add your device results

https://github.com/dmulcahey/home-assistant/tree/dm/zha-sensor-playground If anyone is feeling brave and wants to mess around with what I’m working on… Put the quirks directory from the first link in a folder then path to that folder (the root, not the quirks directory itself) in configuration.yaml under zha with key: device_handlers_path Ex: zha: device_handlers_path: “/Volumes/development/device_handlers” This will allow the quirks to load just like device handlers do for the SmartT…

[techoguy (Chase)]

Thanks! i’ll keep on eye on that.
Currently when I press the dimmer buttons I see this in the logs:

[zigpy.zcl] [0x9cf0:1:0x0006] ZCL request 0x0101:
[zigpy.zcl] [0x9cf0:1:0x0008] ZCL request 0x0102: [0, 30, 9]

line one is button one (on), line two is button two (brighten). I thought I would be able to trigger off of those but I wasn’t sure how to format that for an event trigger for automation. I assumed I could but maybe not?

[boojew]

@ohmer

Ecosmart A19 Smart bulbs from Home Depot Canada work fine. I have both RGB and white bulbs. They are very cheap! 27$CA for RGB and 22$CA for white (can change the “temperature”). They also have cheaper white bulbs with fixed color temperature (at 15$ I think).

Can’t compare with Philips Hue, I didn’t tried them when I found the Ecosmart bulbs (50$ for a bulb, seriously Philips!?).

EDIT: well, they are not perfect. They seem to randomly miss commands from hass (light will not always turn on/off as requested) or they do the action but the “confirmation” is not received by hass. Don’t know if the problem is the bulbs and/or the usb controller. Bulbs are my only zigbee devices. Any idea? Should I open a dedicated thread about that?

Hey @ohmer - did you ever actually solve this issue? I just got some bulbs, and they are very “variably” responsive… Its very odd.

[ohmer]

Unfortunately, nop. Home Depot have a 90 days return policy, I returned them all at something like 88 days :D. They are cheap but also garbage. I finally purchased Philips Hue on Amazon on discount… Still overpriced but they work…

[drjared88]

@dmulcahey Question about your quirks implementation for 0.85.

I see that quirks appears to be enabled by default. So just want to confirm there is nothing I have to do in order to get events from my zha devices? I know when I was testing some of your stuff earlier I had to specify a device handlers path but it appears that is not needed any more, correct?

Thanks so much for your work on this stuff!

[dmulcahey (David F Mulcahey)]

It is but you may have to edit the config entry for it before .85.1

[drjared88]

Ok, Maybe the part I am looking for isn’t implemented yet. I see the centralite switch on/off state but I don’t seem to see the actual button press. Before I was seeing them as a zha_event. Should I be seeing those or is that part yet to come?

[tosion]

First I would like to thank for your valuable work here! It has helped me out to get a pretty nice home automation using this Zha-environment with:

RPi/Elelabs ZB Shield/Hass.io/Hass.OS/HA 0.85.1. I have successfully paired 28 devices: Ikea Bulbs, Osram Plugs and Motion sensors, Xiaomi Temp/Hum/Press-; Water leak-, Door/Window-, Human Motion sensors ….

This latest 0.85.1 Update solved almost all the problems I had. Many already working devices got even more features – now I got also for example battery status populated.

So many thanks for your work here!

Couple small issues still exists – I get few of these:

Unexpected response TSN=233 command=1 args=[[<ReadAttributeRecord attrid=1291 status=0 value=28000>]]

12.33 util/async_.py (WARNING)

Unexpected message send notification

12.33 util/async_.py (WARNING)

They must be related to Osram Smart Plugs and power (wattage) measurement. Which does not show the right value. Zigbee.db shows:

Osram smart motion sensor shows entity for battery status but it is unknown.

I have also googled the limitation for number of devices - with no result. Any Idea how many can be paired (Is one device here one ieee address or the number of entities behind that ieee address?)

And finally – I think all the devices are directly connected to my coordinator. Can you use CC2531 with router firmware as a router in ZHA environment, does it work?