Installation of Hassio on Synology NAS

its · February 24, 2018, 10:20pm

Definitely @peerv … Hopefully, someone can help

I am good… not that good I think its all about replacing the startup with init.d and then packaging all…

mateola · April 17, 2018, 6:50pm

let me refresh the topic,
anyone figure it out how to install Hass.io in menu on synology using homeassistant docker ?
thank you in advance

1972rx2 · May 29, 2018, 5:38am

Any update on this? After successfully running Hass.io on a NUC I am also keen to move it all to my Synology DS918+. At the moment I have it running on an Ubuntu VM and although its working well I can’t help think it will use less resources (CPU & RAM) running on docker…thoughts?

digiblur · May 29, 2018, 11:49am

I don’t think you can do the docker in a docker thing nor would I want to? Just install any add-on’s you want manually is what I do and isn’t that difficult plus you get the ability to install stuff that isn’t on the add-ons list.

mateola · June 11, 2018, 5:41pm

anyone tried to use https://synocommunity.com/package/homeassistant from SynoCommunity ?

derandiunddasbo · July 5, 2018, 3:39pm

I wouldn’t waste my time on that one. It’s an ancient version from 2015, one initial release, never updated.

If your Synology is able to run docker and you want to run home assistant on it, the official home assistant docker image is the best way to go in my opinion.

Regarding the hass.io plugins: virtually every hassio addon is just a wrapped and preconfigured version of a native docker container providing the same functionality.

It’s just a bit more convenient to manage these addon containers completely inside HA, instead of switching to the Synology docker GUI. And you spare yourself a bit of manual editing the HA configuration.

Apart from that, I don’t see a great benefit in trying to get hass.io running on a synology nas instead of using the native docker containers.

ziptbm · September 21, 2018, 8:49pm

Let’s take an example like the Lovelace Migration add-on. How do you install this add-on into HA on Docker on Synology NAS?

I’ve pulled down the Docker bits, mapped the config folder, but it fails on launch. There’s got to be more to it. So although multiple people have said how easy it is to manually install add-ons without using Hassio, I’m clearly doing something wrong because the only one that I’ve successfully set up this way was the HASS Configurator.

derandiunddasbo · September 22, 2018, 2:08am

No, I didn’t write that you can use hass.io plugins without hass.io. These are specialized docker containers only working in a hass.io environment.

What I meant is, that most of the hass.io addons are just rewrapped versions of regular docker containers.

For example I’m using a regular mosquitto docker container downloaded from the docker hub via the Synology docker GUI as my mqtt server instead of the hass.io addon providing the same service.

If there’s no regular docker container that provides the same functionality as the hass.io addon, you are out of luck, respectively need to install it manually.

Regarding the lovelace migration script: As this is a one-timer I manually installed it in my current home assistant docker container and it worked fine. It will be gone with the next update of the container, but that’s ok, as I won’t need this script ever again.

leeb98 · September 22, 2018, 2:37am

Regarding the lovelace migration script: As this is a one-timer I manually installed it in my current home assistant docker container and it worked fine. It will be gone with the next update of the container, but that’s ok, as I won’t need this script ever again.

How did you run the lovelace conversion script manually on a DS918+ ?

thanks
Lee

derandiunddasbo · September 24, 2018, 12:23pm

I don’t use a DS918+, but a DS216+II. But using the script in a docker container should be the same for all Synology models.

I downloaded the migration script from here and I put it in the HA config dir:

gist.github.com

https://gist.github.com/OttoWinter/730383148041824bc47786ea292572f8

0migrator.md

# Home Assistant Lovelace Migrator

Do you want to try out this _experimental_ (!) new lovelace UI stuff in Home Assistant but don't want to migrate your entire configuration? This script is here to help! It reads in your Home Assistant configuration (specifically the `group:` section) and creates a matching `ui-lovelace.yaml` file in your Home Assistant configuration folder (of course backing up any previous file at that path).

To use this script, you first need to have python and home assistant installed where you plan to run this script. Do so using virtual environments and the `pip3 install -U homeassistant` command. Then copy below file to `lovelace_migrate.py` (any location should work) and run:

```bash
python3 lovelace_migrate.py -c <PATH_TO_HASS_CONFIG_DIR>
```

This file has been truncated. show original

lovelace_migrate.py

#!/usr/bin/env python3

import argparse
import logging
import os
import shutil
import sys
from collections import OrderedDict

import homeassistant.core

This file has been truncated. show original

I opened a ssh session on the nas and ran a shell inside the running HA docker container with

docker exec -i -t homeassistant /bin/bash

I followed the instruction on the GitHub page, i.e. running a pip3 install -U homeassistant before running the migration script.

I’m not entirely sure, if the pip install is really necessary when the script is used directly in the HA docker container. But it didn’t break anything and whatever got installed will be gone, when I delete and recreate the HA container the next time.

chickenandporn · January 15, 2019, 8:09am

The attempt to update SynoCommunity’s HomeAssistant spk it is in Pull-Request: https://github.com/SynoCommunity/spksrc/pull/3462 … the result might be a bit stale when it lands, but the next update should be a bit less work.

(It’s my PR)

freddy_yu · April 23, 2019, 6:44am

Is there any way to install it now?

fredrike · April 23, 2019, 8:59am

I’ll try to write up a guide, perhaps even create a spk.

Does your NAS support Docker (this is a must to get hass.io support) and which CPU do you have (uname -m)?

freddy_yu · April 23, 2019, 9:13am

然，支持docker。CPU是Intel J1900。

fredrike · April 23, 2019, 9:59am

What does that mean? Please provide the arch (by running uname -m)

Edit: here is a short instruction on how to run hassio on Synology hass.io on Synology · GitHub

Gerben321 · April 24, 2019, 3:07pm

That looks easy enough to do. I’ll give that a try when I find some time. No other requirements needed before running this? (Given that the arch is good etc.)

This still runs Docker images that are visible in the Docker app I assume? Is there anything that would make this unstable for daily use? I’ve been looking to use Hassio instead of regular Docker install for a while now, but I don’t want to trade in performance or stability for example.

@everyone, please post if you’re trying or using this, looking forward to experiences from others.

fredrike · April 24, 2019, 5:01pm

Yes it is supposed to be easy but currently is it not working fully. I can get the hassio supervisor to run and start homeassistant but I can’t access hass.io from there.

See my post as a proof of concept so far. It needs some more testing and I’ve already submitted a patch to hass.io (there might be more that is needed).

I’ll keep you updated with my progress but I’m hopeful to get close to full hass.io functionality into intel_64 arch with native docker support.

Also, the docker instances will still be seen in Synology’s docker app.

In terms of performance it should be the same as for the Docker version of home-assistant on Synology. I hope stability will be the same once I figure out what is causing the connection issue.

Gerben321 · April 24, 2019, 5:23pm

Sounds great. Amazing work! Looking forward to try it soon!

freddy_yu · April 25, 2019, 2:02am

x86_64 :微笑:

DrNerdy · May 3, 2019, 6:12am

I’m hoping that we get somewhere to easily install hassio on Synology. That would make life much easier.
Good luck experts