Hello can someone help me??? I want to turn my PlayStation 5 on and off using the Home Assistant. I’ve already found out the user credentia. How can I now integrate my PlayStation as a switch in the Home Assistant? Unfortunately, I’m not getting any further.
So how far did you get ? Do you have it working from the command line yet? Also last I checked you could not put it in rest mode only wake up, but I haven’t really been keeping up on it so it’s possible someone made some progress with that if you check the GitHub
So far I’ve only found out the user-credential via wireshark. Unfortunately, I don’t really understand how I integrate that into Home Assistant.
unfortunately i don’t have that much experience in home assistant. especially with manual integrations
user-credential: 194931325
what exactly do I have to install now? and how and where exactly?
For example, I tried to install ps5-wake on home assistant. Unfortunately it does not work.
Welcome to the Home Assistant command line.
System information
IPv4 addresses for eth0: 192.168.xxx.xx/xx
IPv6 addresses for eth0: 2003:ea:2728:xxxx:xxxx:xxxx:80a2:b017/64, fd64:17b0:4047:6:c5ef:xxxx:xxxx:xxxxx/64, fe80::f412:64d2:a5e1:e213/64
IPv4 addresses for wlan0:
OS Version: Home Assistant OS 5.13
Home Assistant Core: 2021.6.0
Home Assistant URL: http://homeassistant.local:8123
Observer URL: http://homeassistant.local:4357
➜ ~ git clone https://github.com/iharosi/ps5-wake
fatal: destination path 'ps5-wake' already exists and is not an empty directory.
➜ ~ cd ps5-wake/
➜ ps5-wake git:(master) sudo make install
sudo: make: command not found
➜ ps5-wake git:(master)
This post has somewhat of a guide:
There is also this post which mentions the error you are getting:
I would see if you can get it working from the command line with the commands mentioned here:
Ich hatte dem Führer bereits gefolgt. Und wegen des Fehlers in der Installation. Leider funktioniert auch der angegebene Befehl nicht.
➜ ~ apt-get install build-essential
zsh: Befehl nicht gefunden: apt-get
Und wo sollte ich testen, welches Kommando ich hatte es bereits in der Schale und auf Home Assist
As already mentioned, I am unfortunately not at all familiar with the manual area. so far i had only installed finished platforms and stored them in the resources.
it would be really great if you could help me somehow
Many Thanks
Unfortunately I do not use Home Assistant OS so I am not sure what would need to be done to get apt-get working… I know I have seen the question in these forums previously… maybe try searching here for apt-get Homeassistant OS ? Or hopefully someone familiar with it can chime in
Edit: Use apt-get commands
I have now installed everything on another raspberry pi. everything works there. how do I create a switch that executes a command on another device via ssh
Are you familiar with shell_commands ? The command in this post would be running it on a remote machine… the same way you could test to see if working before putting it into a sensor
I’ve now installed everything so far.
In the shell of home assistant I can already log into the other raspberry pi via ssh without a password and execute the command to start the playstation.
I used the following instructions for logging in loosely
http://linuxproblem.org/art_9.html
so far everything works.
Now I want a switch to send this command, but I don’t know how to create this switch.
➜ ~ ssh [email protected]
Linux raspberrypi 5.10.11-v7l+ #1399 SMP Thu Jan 28 12:09:48 GMT 2021 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Jun 3 18:50:42 2021 from 192.168.xxx.xx
pi@raspberrypi:~ $ cd ps5-wake/
pi@raspberrypi:~/ps5-wake $ ./ps5-wake -vW -194931325 -H 192.168.178.xx
Device found: PS5-248 [PS5/78C881B8BD09]: Home Screen
Sending wake-up...
pi@raspberrypi:~/ps5-wake $
I have now integrated it that way. Unfortunately the switch doesn’t work. Since the Playstation cannot be switched off, I would like the command to switch on the play for every switch operation
switch:
- platform: command_line
switches:
ps5:
command_on: "ssh [email protected] | cd ps5-wake/ | ./ps5-wake -vW -194931325 -H 192.168.178.62"
command_off: "ssh [email protected] | cd ps5-wake/ | ./ps5-wake -vW -194931325 -H 192.168.178.62"
friendly_name: 'Playstation 5'
Do you know how to get the bash shell inside the home assistant container? I use supervised so I’m not sure if the steps are the same on HaOS… but I would try that command from there so you can see the output… most likely you need to do ssh keygen so HA can run that command without issue… testing in the shell will let you see the error… I will edit post in a minute and link a post that walked me through that process…
So I’m assuming you got it working when manually typing the commands directly on that new pi?
Also the ps5 can automatically turn on and off based on the input of your tv changing… so you can have it shut off as soon as you switch off that input
So I enter the command in the shell directly on Home Assistant and from the home assistant I connect to the other raspberry pi.
this works. but not the platform
an ssh keygen has already been created by me in order to be able to switch to the pi via ssh one password. see my other post the link
Updated with working standby
Using a pi because I already use that for bluetooth → switchbot and, besides containers, I don’t want to install stuff on my NAS, where I run hass.
If your always-on computer is running hass os this probably will not work.
Install npm
Install https://github.com/dhleong/playactor
sudo npm install -g playactor
Search for PS5
playactor browse
Outputs
{
"address": {
"address": "192.168.1.95",
"family": "IPv4",
"port": 9302,
"size": 170
},
"hostRequestPort": 997,
"extras": {
"statusLine": "620 Server Standby",
"statusCode": "620",
"statusMessage": "Server",
"status": "STANDBY"
},
"discoveryVersion": "0003...",
"systemVersion": "08540...",
"id": "78C88...",
"name": "PS5-635",
"status": "STANDBY",
"type": "PS5"
}
Copy JSON "name":
playactor login --host-name PS5-635 --no-open-urls
Follow on screen steps
Open the following URL in a web browser to login to your PSN account.
When the page shows "redirect", copy the URL from your browser's address bar and paste it here.
https://auth.api.sonyentertainmentnetwork.com/...
Checking PS5 state
playactor check outputs json but for some reason refuses to play nice with command line sensor so I also installed jq
sudo apt install jq
Home Assistant
These can be combined with a template switch
sensor:
- platform: command_line
name: Playstation
scan_interval: 300
command: ssh -o StrictHostKeyChecking=no -i /config/.ssh/id_rsa [email protected] 'playactor check --host-name PS5-635 | jq -r ".status"'
value_template: >
{% if value == 'AWAKE' %}
ON
{% elif value == 'STANDBY' %}
OFF
{% else %}
Okänd
{% endif %}
shell_command:
playstation_5_wake: ssh -o StrictHostKeyChecking=no -i /config/.ssh/id_rsa [email protected] 'playactor wake --host-name PS5-635'
playstation_5_sleep: ssh -o StrictHostKeyChecking=no -i /config/.ssh/id_rsa [email protected] 'playactor standby --host-name PS5-635'
3 Likes
Great guide! I installed npm, node and playactor on my Pi’s main os, everything is working great.
You can also do a switch entity that automatically updates the state. That way you dont have to do shell_command and an additional sensor, everything can be handled in one place:
switch:
- platform: command_line
switches:
playstation:
value_template: >
{% if value == 'AWAKE' %}
true
{% elif value == 'STANDBY' %}
false
{% else %}
Unknown
{% endif %}
command_state: ssh -i /config/ssh/id_rsa -o StrictHostKeyChecking=no [email protected] 'playactor check --host-name PS5-639 | jq -r ".status"'
command_on: ssh -i /config/ssh/id_rsa -o StrictHostKeyChecking=no [email protected] 'playactor wake --host-name PS5-639'
command_off: ssh -i /config/ssh/id_rsa -o StrictHostKeyChecking=no [email protected] 'playactor standby --host-name PS5-639'
friendly_name: Playstation 5
@skynet01 Nice! That’s neater.
btw @wicol’s state sensor is faster
https://github.com/wicol/ha-config/blob/590f494721b889dda3f7ab689b61ac6fede8cfd8/sensors/ps5.py
switch:
- platform: command_line
switches:
playstation_5:
friendly_name: Playstation
command_state: !secret playstation_5_state
value_template: >
{{ value == 'ON' }}
command_on: !secret playstation_5_wake
command_off: !secret playstation_5_sleep
Home Assistant Operating System
Proof of concept
https://developers.home-assistant.io/docs/operating-system/debugging/
This section is not for end users. End users should use the SSH add-on to SSH into Home Assistant. This is for developers of Home Assistant. Do not ask for support if you are using these options.
root
ssh [email protected] -p 22222
build dockerfile
docker build -t playactor:latest -f - . << EOF
FROM alpine:3.12.8
RUN apk add nodejs-current
RUN apk add npm
RUN npm install -g playactor
EOF
run container
docker run -d --name playactor --network=host playactor tail -f /dev/null
test
docker exec -it homeassistant /bin/bash
ssh-keygen -f /config/.ssh/id_rsa
cat /config/.ssh/id_rsa.pub #copy
exit
vi /root/.ssh/authorized_keys #paste
docker exec -it homeassistant /bin/bash
ssh -o StrictHostKeyChecking=no -i /config/.ssh/id_rsa [email protected] -p 22222 'docker exec playactor sh -c "playactor about"'
entity
sensor:
- platform: command_line
command: ssh -o StrictHostKeyChecking=no -i /config/.ssh/id_rsa [email protected] -p 22222 'docker exec playactor sh -c "playactor about"'
EDIT:
For auth persistence add RUN mkdir /root/.config/playactor/ to docker build and map generated credentials.json to local folder
-v /path/to/folder:/root/.config/playactor
2 Likes
@Mattias_Persson so the ssh script is good for turning it on and off while Wicol’s is better for status? If the value_template is used in the switch does it really matter which method is used? I think the switch only checks for the state when PS is turned / turned off and not at constant intervals?
Supposedly scan_interval should work… looks like an old post, I’ll try it if I get a chance later.
Just started my ps5 manually, and the sensor updated without ha interaction 
default seems to be 30 seconds, which is quite often
- platform: command_line
scan_interval: 300
switches:
playstation_5:
...
…yeah the switch is about 30 seconds I would say. It seems to work ok, even though I agree its too often. Unfortunately I use it an automation where it switches my receiver and tv to correct inputs so I can’t be there waiting for 90 seconds