The trigger sensor is specifically designed to integrate seamlessly with a door contact sensor but you can choose any binary sensors to trigger the automation.
When activated, a trigger sensor such as a door contact sensor will turn ON the lights and switches.
Light - Switches:
Enter any lights or switches that will be activated by the trigger sensor/s.
Light Control Options:
Utilize âLight Controlâ to adjust brightness, colour temperature, colour, and transition times.
Night Lights Mode:
Enable âNight Lightsâ for softer illumination during night time activities, automatically enabled based on conditions.
Timer Option:
You have the option to use a timer, which determines how long the lights remain ON after the trigger sensor is activated. It will then automatically turn OFF the âLights - Switchesâ when the timer expires.
Motion Sensor Option:
You have the option to use a motion sensor that will reset the timer. If the timer has turned OFF the lights and the trigger remains active, the motion sensor will turn the lights back ON when detecting motion.
HA Restart Safeguards:
Benefit from built-in safeguards for Home Assistant restarts.
Blueprint Integration:
Sensor Light - Motion activated lighting. Click Here to learn more.
CHANGELOG
Version: 1.2 - 31 July-24 - Added RGB colour selection, night lights and collapsible sections.
Version: 1.1 - 26 May-24 - Update to description to show labels are excluded.
When using multiple trigger sensors or motion sensors, itâs advisable to group them together using a group helper. This ensures smoother automation execution and prevents conflicts.
CREATE A GROUP HELPER
Go to Settings > Devices & Services > click on the âHelpersâ tab > click â+ CREATE HELPERâ and select âGroupâ.
Then enter a name, in this example we put âPantry Door Contact Sensorâ. Then select your âMembersâ or entities (all of them that will be in the blueprint automation). Keep âHide Membersâ and âAll Entitiesâ toggles OFF as shown below. Click submit.
For all your closets, pantry, & cupboards, utilize the timer option and select a motion sensor for enhanced functionality. If youâre using my sensor light blueprint, the same motion sensor will keep the lights ON or turn them back ON as needed.
If you like this blueprint? Consider hitting the button in the top post
If you like my blueprints, and would like to show your support or just say thank you? Click Here
Great automation and darn near perfect for my use case. Is there any chance of adding a nighttime option based on a time range? I have some closets that I want to have a dimmer light during the evening versus during the day.
I am currently using your Sensor Light BP for my pantry light triggered by a door sensor.
Whatâs the intention for this BP?
Whatâs the difference between this BP and the Sensor Light BP?
Pantry - Butlers Pantry etc.
Let say we are using the my sensor light blueprint to control the lights in the kitchen. We then have a pantry with some lights. We install a contact sensor on the pantry door.
Now we use this blueprint using the pantry contact sensor as the trigger. When the door opens the light turn ON and it will turn OFF in a given time delay, so we donât need to close the door. When we close the door if the light is ON the light turns OFF. So we can see it works different to the Sensor light BP.
Easy, now lets take our automatons to the next level.
Let enable the âMotion Sensor Optionâ and add our motion sensor we use in the kitchens sensor light BP automation. As we enter the kitchen our kitchen lights turn ON. We then start preparing meals etc. We open the pantry door and leave it open. The light stays ON now due to the motion sensor being active. We can go in and out of the pantry and the light is ON. Now we leave the kitchen, the kitchen lights are ON and the pantry lights are ON and the pantry door is open. The motion sensor clears turning OFF the kitchen lights and the pantry light. Nice. We come back into the kitchen and all the kitchen lights turn ON including the pantry lights. Nice. We then close the pantry door and the pantry lights turn OFF but the kitchen lights stay ON until we leave and the sensor light BP turns the kitchen lights OFF.
If we used the sensor light BP for this along with a contact sensor you would have to close the door for the light to turn OFF and all of the above scenarios would not work.
How many times do the kids/me open the pantry door and not close it? It keeps family peace as the lights always turn OFF even if you leave the door open not to mention it takes you house automation to the next level
Closet
Again same thing as above but in a bedroom. Sensor Light BP in the bedroom turns bedroom lights ON, open the closet doors (door contact sensor) and the light turn ON. Use the motion sensor option and you can walk out of the room with the closet doors open (contact sensor active) and all your light will turn OFF due to no motion in the room. Walk back into the room all lights back ON. Close the closet, closet light turn OFF.
How many times to the kids/me leave the closet doors open? Family peace, donât need to keep telling the kids to close the closet doors
Hope this all makes scene and gives you a better understanding on why it was developed. Sensor Light BP canât to this.
I also have a Manual light control with auto OFF. This works with your lamps you manually turn ON if needed. It will then turn them OFF for you in a similar way as this PB but the trigger is different. Check it out as this to makes your automatons smarter.
You have done so many wonderful blueprints but sometimes reading the name and description, I have trouble differentiating them. Perhaps for this one, the description you give:
When activated, a trigger sensor such as a door contact sensor will turn ON the lights and switches.
should be changed to:
When activated, a trigger sensor such as a door contact sensor will turn ON the lights and switches. The lights and switches will turn off either after a set time has elapsed, or when the door contact sensor is closed.
I have a question regarding the motion sensor options.
Does the light automatically turn off when the motion sensor state changes to âclearâ (no motion detected)?
I used the HA BP âmotion-activated lightâ previously but it did not let, or I couldnât figure how, to include brightness and transition. But I liked the way that BP had the lights turn off when no motion was detected. And then you had the timer delaying the off action after no motion detected.
In the FAQ, if I read it correctly, the timer starts when the automation triggers the lights to turn on. And if the motion sensor is continuously in state âoccupiedâ the timer will turn off the light. And it wonât turn the lights on until the motion sensor state toggles. Is my understanding correct?
I also want to add a vote for the nighttime feature.
My use case:
I have a walk in closet with a motion sensor.
I want the lights to turn on when motion is detected. And stay on for 2 min after no motion detected.
The turn on attributes (brightness and transition) should be different after 10PM and before 8AM.
Welcome to the community and thanks for your kind words.
I will go directly to your use case and thanks for providing this as it helps me help you.
This blueprint helps if you have doors with a contact sensor.
If you have a walk in closet that is open with a motion sensor in it then look at my Sensor Light blueprint. Set it up for the lights you like normally and then use the night lights option with the time condition setting 10pm to 8am. Night lights is where you set your different lights and brightness for those times. It will be perfect for what you are trying to do.
If I got it wrong just let us know and I try and help again.
Any update on adding a night time option to the lights? The blueprint is really great just struggling with blinding myself when I open the closet at night.
I havenât forgotten about you. I have updated this blueprint and am now just doing the final touches. Itâs all ready to go, and I think it looks really nice. Youâll understand why it took so long once you see it, as there were other developments that had to be completed first. Keep an eye out for the update, and let me know what you think.
Thank you for being patient. As they say, âAll good things come to those who wait.â
Light Colour: You now have the option to select RGB, RGBW or RGBWW in your light control option.
Night Lights - You can now set different lights for night time.
Collapsible Sections - Added collapsible sections to the blueprint. This enhancement improves the blueprint user interface by making it cleaner and more organized, allowing sections to be collapsed.
This feature was introduced in Home Assistant 2024.6, so you must have this version or later for the blueprint to work.
If you like this blueprint? Consider hitting the button in the top post
If you like my blueprints, and would like to show your support or just say thank you? Click Here